Rack and Pinion question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

AustinBelair · 04-07-2016, 10:09 PM

I'm about to order the Unisteer setup and the guy at Unisteer pointed out 2 things.

1. Since we're running an LS motor, the line pressure needs to be dampened. He said the rack is a low-flow and the LS power steering pump is high flow. Has anyone ran a regulator in the high pressure line to reduce the line pressure?

2. Since were are doing a 3/4 drop (2" Spindles and 1" springs) he said that anything over 2" drop would create a lot of bumpsteer. Is there a cure for that?

Anyone have input on those two items?

04-07-2016, 10:09 PM	#1
AustinBelair Registered User Join Date: Apr 2005 Location: Austin, Texas Posts: 296	Rack and Pinion question I'm about to order the Unisteer setup and the guy at Unisteer pointed out 2 things. 1. Since we're running an LS motor, the line pressure needs to be dampened. He said the rack is a low-flow and the LS power steering pump is high flow. Has anyone ran a regulator in the high pressure line to reduce the line pressure? 2. Since were are doing a 3/4 drop (2" Spindles and 1" springs) he said that anything over 2" drop would create a lot of bumpsteer. Is there a cure for that? Anyone have input on those two items? __________________ My mother is a recent cancer survivor and this truck build is for her



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.