GA '60-'62 factory fan shroud - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Brad54 · 12-05-2017, 12:49 AM

Factory fan shroud for '60-'62 Chevy, standard 1/2-ton radiator.
It's straight, and solid.
The two middle mounting holes were drilled out. You can either put a washer over the radiator bolt and use it as-is, or repair it with a welded patch.

Remember this summer, cruising and watching the needle on the temp gauge rise while you sweated like a whore in church on Sunday morn?

This will fix that.

$150 plus the ride.

Can also be picked up at the NE GA Swap Meet the first Saturday of every month.

-Brad

12-05-2017, 12:49 AM	#1
Brad54 Registered User Join Date: Aug 2006 Location: Athens, Georgia Posts: 1,456	'60-'62 factory fan shroud Factory fan shroud for '60-'62 Chevy, standard 1/2-ton radiator. It's straight, and solid. The two middle mounting holes were drilled out. You can either put a washer over the radiator bolt and use it as-is, or repair it with a welded patch. Remember this summer, cruising and watching the needle on the temp gauge rise while you sweated like a whore in church on Sunday morn? This will fix that. $150 plus the ride. Can also be picked up at the NE GA Swap Meet the first Saturday of every month. -Brad Attached Images __________________ '61 Suburban daily driver: off the road due to 180-pound 8-pt buck! '62 K-10 long-step project '61 C30 Camper, aka "Valdez" There's no cool like Old School



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.