![]() |
Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
![]() |
#11 |
Registered User
Join Date: Sep 2017
Location: Patriot IN
Posts: 163
|
Re: 1970 C30 Car hauler Buildish thread.
Well my new vise came in today!
[IMG] ![]() [IMG] ![]() Old Vs New! [IMG] ![]() [IMG] ![]() Because of how big it is I decided to mount it on the end of the work bench [IMG] ![]() Just to really compare the two [IMG] ![]() it's a Monster [IMG] ![]() So back to the build I did not get nearly as much done to day as I had planned. I cleaned up the dash and painted the inside to prevent rust. [IMG] ![]() I also por15'ed the ends of the dash where its bolts in. How ever as I went to install the dash I had forgotten to mount the hydraulic clutch master for the nv4500. So I wanted to wait to weld the dash in so it would make installing the clutch master easier. I was hoping to have the dash in and the cab seam sealed and primed today. But I was not able to scuff the por15 to prep it for primer as the scuff pads did not come into day. I tried sandpaper but it went through the por15 and that defeats the purpose of having it. So it will be next week it will go into primer. I used an existing hole to for the steering column bracket to mount the clutch master. [IMG] ![]() [IMG] ![]() [IMG] ![]() [IMG] ![]() [IMG] ![]() |
![]() |
![]() |
Bookmarks |
Tags |
air ride, c30, cummins, nv4500, ramp truck |
|
|