Shucks First Build - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Shucks · 06-28-2018, 06:12 PM

I appreciate all you guys's inputs! Very helpful.

So I have a pretty good mechanic in the family and he's going to help me rebuild this rear end. He told me how to accurately measure the gears and to find out I actually have 3.07 gears. He and I figured up some parts and sounds like I'm going to be doing all new bearings, ring and pinion and a LSD cage. Won't be for awhile because he's pretty busy right now, but none-the-less I'm going to help him out and learn how its done!

Before this happened I took a video of my new exhaust and how its ran. I couldn't find much information on the best way to run an exhaust on these trucks, so I figured I'd make a video on how I did mine.

https://www.youtube.com/watch?v=JQOB...ature=youtu.be

06-28-2018, 06:12 PM	#21
Shucks Registered User Join Date: Nov 2013 Location: Lawrence Kansas Posts: 229	Re: Shucks First Build I appreciate all you guys's inputs! Very helpful. So I have a pretty good mechanic in the family and he's going to help me rebuild this rear end. He told me how to accurately measure the gears and to find out I actually have 3.07 gears. He and I figured up some parts and sounds like I'm going to be doing all new bearings, ring and pinion and a LSD cage. Won't be for awhile because he's pretty busy right now, but none-the-less I'm going to help him out and learn how its done! Before this happened I took a video of my new exhaust and how its ran. I couldn't find much information on the best way to run an exhaust on these trucks, so I figured I'd make a video on how I did mine. https://www.youtube.com/watch?v=JQOB...ature=youtu.be __________________ C H E V R O L E T Check out my build thread! Shucks First Build



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.