Tailgate Bench - The 1947 - Present Chevrolet & GMC Truck Message Board Network

HAULIN' IT · 12-31-2018, 01:27 AM

Thought I'd post up a couple photos of a Christmas present I made.

The vertical irons were from an old bench that sat around the shop so I put them to use after figuring they were a good size

The gate is one of those Re-pops you see...actually not a bad piece. Can't offer any input on the fitment, but it's rather heavy & not a bad stamping.

The bottom angle iron structure I made & a buddy who has a nice woodshop helped me router, stain & clear the boards I got from the local Home Depot

The bed strips came from Mar-K & they were awesome to work with. Lorne

12-31-2018, 01:27 AM	#1
HAULIN' IT Registered User Join Date: Dec 2015 Location: Beaver Falls, Pa Posts: 165	Tailgate Bench Thought I'd post up a couple photos of a Christmas present I made. The vertical irons were from an old bench that sat around the shop so I put them to use after figuring they were a good size The gate is one of those Re-pops you see...actually not a bad piece. Can't offer any input on the fitment, but it's rather heavy & not a bad stamping. The bottom angle iron structure I made & a buddy who has a nice woodshop helped me router, stain & clear the boards I got from the local Home Depot The bed strips came from Mar-K & they were awesome to work with. Lorne



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.