WA 60-62 McGauhgy’s 2.5” drop spindles - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**chev-obsession** · 05-09-2019, 02:27 PM

Selling these new, never mounted 60-62 drop spindles that I had from a Baer Brake kit. I needed the 63-66 spindles. Comes with the bracket for the C5 brake caliper brackets. They have a little bit of surface rust that can be cleaned off. I Believe these spindles were setup for the 13” rotors. Baer doesn’t make the kit I bought anymore, but the kit cpp has is similar to what I used.

Make me an offer on them if interested. Would like to see them go to a truck rather than the scrap yard. Might be able to fit them in a flare rate box since they’re cut on one side.

https://www.cjponyparts.com/classic-...SABEgIE-_D_BwE

05-09-2019, 02:27 PM	#1
chev-obsession Senior Member Join Date: Jul 2008 Location: kennewick, WA Posts: 1,496	60-62 McGauhgy’s 2.5” drop spindles Selling these new, never mounted 60-62 drop spindles that I had from a Baer Brake kit. I needed the 63-66 spindles. Comes with the bracket for the C5 brake caliper brackets. They have a little bit of surface rust that can be cleaned off. I Believe these spindles were setup for the 13” rotors. Baer doesn’t make the kit I bought anymore, but the kit cpp has is similar to what I used. Make me an offer on them if interested. Would like to see them go to a truck rather than the scrap yard. Might be able to fit them in a flare rate box since they’re cut on one side. https://www.cjponyparts.com/classic-...SABEgIE-_D_BwE __________________ 1965 c/10 swb 1969 c/10 lwb



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.