Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
08-19-2019, 09:54 AM | #17 |
Registered User
Join Date: Jul 2019
Location: Cambridge, Ontario
Posts: 34
|
Re: CRGRS 66 – Winter Build Thread
An ever so small amount of progress this weekend.... I previously extracted a broken bolt from the nose of the crankshaft and this weekend I reassembled a few items. After ordering a harmonic balancer install tool from Amazon (since no stores in town had one to rent or buy) I was able to reinstall the harmonic balancer and then continue with the crank pulley, the fan, and the belts including adding anti-seize to the metal to metal connections.
One question I do have is, how close can the belts be to other items? I'm a bit concerned with the clearance between the belt coming from the alternator and one of the bolt heads for the power steering pump bracket as there is only about 1/16" clearance.
__________________
Check out my 66 C10 build here: http://67-72chevytrucks.com/vboard/s...d.php?t=546694 Look here, I also built a canoe: http://stevescedarstripcanoe.blogspot.com/ |
Bookmarks |
|
|