TA_C10: Stage 1

[TA_C10]

Update - MAF Sensor / Kick Vents

Got the MAF sensor wired up and tested. Idle seemed a little low at 500 but as I drove around it seemed to learn and it's been at 600 since.

I also got my kick panel vents rebuilt. Found replacement foam online, worked good. Won't install these until I get my little access panel doors/hinges made for door wiring.







Loomed up the wiring, tucked away.







Vents were easy. They were pristine on the insides after I drilled the rivets. Foam was shot. I just took them apart, cleaned them up, painted them, put them back together with new foam, rivets.