Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
02-22-2021, 04:17 PM | #30 |
Registered User
Join Date: Jul 2015
Location: South Orange County CA
Posts: 1,259
|
Re: Disc Brake Upgrade Reference Thread
Regarding the PS gear, I was considering one from Rock Auto, like this one. It is 3 to 3-1/4 turns. Would this be ok to use? Special idler arm required? My front cross member is from a 1974 C20, so I am planning on ordering tie rods, idler arm, pitman arm and steering gear from a 1974 pickup.
https://www.rockauto.com/en/moreinfo...sn=908&jsn=908 Regarding the PS pump - there seems to be pumps that had a reservoir and others that did not. Can anyone elaborate on the pros/cons of both? Also, that PS bracket for the 292 seems to have a lot of different configurations; the website from Davis Speed Equipment shows different water pump options from 75-89. Can I run a different waterpump on my 292? Is that the only advanctage/requirement, capability of runnig the PS pump? And, do I need a PS control valve?
__________________
1963 C20, small window, long bed 292, 4-speed |
Bookmarks |
|
|