|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
|
|
Thread Tools | Display Modes |
02-22-2022, 02:42 AM
|
#1 |
|
Senior Member
 
Join Date: Feb 2009
Location: Northern Nevada
Posts: 7,150
|
looking for specific info. for lower shift control rod assembly for 71-72 402/400
I THINK that assembly is per #5 & #6 in the illustration below, and am asking about:
1. Is the grommet like that in the picture below? If so then it looks like # PBCS51612 can be made to work. 2. On which side of the shaft control cross (#10) is the grommet inserted? I thought the RH side, but might be the left. By chance is the grommet flanged on both sides of the cross? 3. If a single flange, can you describe how deeply the grommet inserts into the cross? I would expect it's flush the other side of the hole, but. 4. Can you confirm two flat washers are used. I only removed one. Are they special washers? Thank you
__________________
Tony 71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assm. guide "kit" for restoring the truck from ground up. With assys, the guide accts for 1000s details, OEM identifications & part numbers, written in short order. 700+ images of assm., illust., charts, and points of interest. Much of the info. applies to all 67-72 GM trucks, and to a lessor degree all 67-72 GM vehicles. My build thread, and more on the guide https://67-72chevytrucks.com/vboard/...d.php?t=730025 Last edited by 71CHEVYSHORTBED402; 02-22-2022 at 06:08 PM. |
|
|
| Bookmarks |
|
|
Threaded Mode