The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Engine & Drivetrain > LSx Swaps

Web 67-72chevytrucks.com


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 05-20-2022, 06:56 PM   #1
kev2809
low n' slo
 
kev2809's Avatar
 
Join Date: Mar 2009
Location: rosenberg, texas
Posts: 5,134
Stock harness rewire questions

engine is 2002 DBW 5.3/4l60e

im in the process of depinning the wires and removing everything i dont need. im using brendans chart on lt1swap.com...and so far have removed every yellow wire. my question is, what happens with the "tan" blocks on the chart? if if im using the 4l60e do i leave all the "red" blocks? and this might sound stupid, but the "blue" blocks stay in the pcm..but will eventually be wired to the stand alone fuseblock?

also, if i am not running electric fans, should i pull those pins too, or just wire them like i will use them just in case for future references?

and after snipping all the pink wires and orange wires in connector C2....i have a pink B9 wire that doesnt show in the diagram. does that get snipped too?

sorry to sound like an idiot, but i dont like wiring lol. i figured i would give this a shot to try it myself
__________________
67 1/2 ton Suburban - Project DRGNWGN. Build thread

-_--_--_ _________
_--_-_ -/____|__|__\__
,.,,,.,.,,.,|_O _______ O_]
kev2809 is offline   Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:12 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com