Lower Radiator hose for 350 forward position, serp system, angled radiator - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**guyryan100** · 01-22-2023, 07:10 PM

Hi,
I've read all the lower radiator hose threads, I don't think anyone has addressed this combination.

* 1967 C10
* 350 mounted in foward position
* serpentine system
* 67 radiator - flange is angled up about 30 degrees and is 1.75" diameter

I have read about Gates 20842 but I believe this is for engines in the rear position, same with Gates 21941. http://67-72chevytrucks.com/vboard/s...d.php?t=464850

I tried AC Delco 24053L/GM 88908342 and it was not match.

I also tried Napa 7581.

I bet many of you have this engine configuration, what lower hose are you using, other than a universal hose?

01-22-2023, 07:10 PM	#1
guyryan100 Registered User Join Date: Sep 2001 Location: Cumming, GA Posts: 469	Lower Radiator hose for 350 forward position, serp system, angled radiator Hi, I've read all the lower radiator hose threads, I don't think anyone has addressed this combination. * 1967 C10 * 350 mounted in foward position * serpentine system * 67 radiator - flange is angled up about 30 degrees and is 1.75" diameter I have read about Gates 20842 but I believe this is for engines in the rear position, same with Gates 21941. http://67-72chevytrucks.com/vboard/s...d.php?t=464850 I tried AC Delco 24053L/GM 88908342 and it was not match. I also tried Napa 7581. I bet many of you have this engine configuration, what lower hose are you using, other than a universal hose? Last edited by guyryan100; 01-22-2023 at 07:17 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.