Can I get some driver door pictures please - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**kev2809** · 02-24-2023, 10:15 AM

I'm trying to see if my door alignment is a problem or normal. I don't have any rubber in yet, but it seems both my doors align pretty decent up to about halfway up the door and it starts going in. Now, the driver side "4th door area" was hit when I got it, so I welded welding rods to close the gap, but the passenger side was not. they both have the same gap though. all 3 doors are getting new hinge pins but the only one that is really stiff to open right now and close is the passenger side one (that didn't get hit).

could it just be the strikers that need adjustment.. or is this gap "normal"?

1st 2 pictures are driver side door, other 2 pictures are passenger side

02-24-2023, 10:15 AM	#1
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,143	Can I get some driver door pictures please I'm trying to see if my door alignment is a problem or normal. I don't have any rubber in yet, but it seems both my doors align pretty decent up to about halfway up the door and it starts going in. Now, the driver side "4th door area" was hit when I got it, so I welded welding rods to close the gap, but the passenger side was not. they both have the same gap though. all 3 doors are getting new hinge pins but the only one that is really stiff to open right now and close is the passenger side one (that didn't get hit). could it just be the strikers that need adjustment.. or is this gap "normal"? 1st 2 pictures are driver side door, other 2 pictures are passenger side Attached Images __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_] Last edited by LockDoc; 02-25-2023 at 12:48 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.