Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
04-11-2023, 12:43 PM | #1 |
New Member
Join Date: Dec 2020
Location: Mapleton MN
Posts: 6
|
Dynacorn trailing arms?
Hi everyone! I hope it’s not against the rules or rude to ask a question in my first post (other than the welcome section).
My question is, are the Dynacorn reproduction trailing arms any good, mainly concerned about fitment/correct dimensions. My originals are crusty enough that they should be split, sandblasted, and reassembled- don’t really have time for that and think they still would be suspect. I would go tubular in I second but I’m doing the full Hotchkiss TVS system. When I called Hotchkiss the rep flat told me that they designed the kit for stock trailing arms and if they thought the arms should be upgraded they would have done so. I’ve read the many debates on this subject and have decided to go with what Hotchkiss recommends. Getting long winded here! So, any experience with the Dynacorn parts? The only thread I found here was started by someone who said the measurements were off-not good. I also don’t see any used ones that really look decent to me, maybe need to look harder. Thanks for any replies! Posted via Mobile Device |
Bookmarks |
|
|