04-29-2007, 03:50 PM | #26 |
Roadtrip!
Join Date: Feb 2003
Location: Grand Rapids MN
Posts: 13,746
|
Re: Parting out, 71 burb.
A few more pics. I am just about done with this one.
Down south, one gaurd is pretty nice, the other has some issues. I think something hit it at one time and that is why the chrome is flaking. Should still be useable with new bolts. $45 shipped. Brake booster with prop valve and brackets. Working condition unknown. It is a little heavier than i thought, $75 shipped. Kirklin asked about this... Gas pedal assy. Cable type, v-8. $30 shipped Hi and low horns. Wire was cut at the harness. $30 shipped
__________________
67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto |
04-29-2007, 03:57 PM | #27 |
Roadtrip!
Join Date: Feb 2003
Location: Grand Rapids MN
Posts: 13,746
|
Re: Parting out, 71 burb.
Rear end from 71, 5 lug. Looks like it has the posi, with 3:07 gears. This is just by spinning it on jack stands. Figure on needing all the brake parts. There is nothing under the drums. Panhard bar is fine, and the Drive shaft u-bolts are still on it. (no tires with it) Must be picked up. $180. Badpeanut is first, hgsnotes is second.
Here is how the burb sits now... Ask quick if you see something you need. It will be gone in a few hours.
__________________
67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto |
04-29-2007, 05:13 PM | #28 |
Can't ReMember
Join Date: Dec 2006
Location: Orlando area
Posts: 258
|
Re: Parting out, 71 burb.
I need a wiper switch and knob. I bought two new ones already, they were both junk.
Thanks
__________________
Adversity doesn't test your character; it reveals it. 71 C-10 LWB 350/TH350. I purchased it in 1978 for $1400. I'm currently abusing it daily. (when it's running ) |
04-29-2007, 06:05 PM | #29 |
Registered User
Join Date: Dec 2006
Location: Trinidad, Colorado
Posts: 642
|
Re: Parting out, 71 burb.
I'll call UPS and investigate 1st thing in the morning.........Thanks.
__________________
69' 3/4 4X4 470ci BBC 700 HP.... D60/14bolt 205/465 http://profile.myspace.com/index.cfm...ndid=127691959 |
04-29-2007, 08:24 PM | #30 |
Can't ReMember
Join Date: Dec 2006
Location: Orlando area
Posts: 258
|
Re: Parting out, 71 burb.
How about the driver side vent window assembly, custom/10 deluxe emblems and the wiper switch. (I see someone already wanted the knob)
__________________
Adversity doesn't test your character; it reveals it. 71 C-10 LWB 350/TH350. I purchased it in 1978 for $1400. I'm currently abusing it daily. (when it's running ) |
04-29-2007, 08:43 PM | #31 |
Roadtrip!
Join Date: Feb 2003
Location: Grand Rapids MN
Posts: 13,746
|
Re: Parting out, 71 burb.
THE BURB IS GONE!!!
Diesel, keep in mind we don't have a ups store or greyhound close by. 71mutt, drivers side vent was broke. I saved one custom/10 and one deluxe emblem. I also pulled the wiper switch, and i have an extra knob. I should have extras of both emblems if you need pairs. If you want the switch, knob, 2 custom/10 and 2 deluxe emblems, how about $30 shipped.
__________________
67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto |
04-29-2007, 10:31 PM | #32 |
Roadtrip!
Join Date: Feb 2003
Location: Grand Rapids MN
Posts: 13,746
|
Re: Parting out, 71 burb.
I also saved some of the clamshell door hardware. If there is any interest, i will get a pic up tomorrow.
Trades may be considered on any of these parts.
__________________
67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto |
04-30-2007, 08:41 AM | #33 | |
Not a bad nut after all..
Join Date: Dec 2000
Location: ND
Posts: 1,756
|
Re: Parting out, 71 burb.
Quote:
__________________
'05 Chevy 2500HD 4x4 '72 GMC LWB 4x2 driver '72 Chevy LWB 4x4 plow truck '71 Blazer 4x4 driver '70 GMC LWB trailer |
|
04-30-2007, 08:45 AM | #34 |
Registered User
Join Date: Jan 2007
Location: Fort Worth, TX 76133
Posts: 406
|
Re: Parting out, 71 burb.
are those front bumper gaurds salvageable and still for sale?
If Down South Truckin, doesnt want those bumper guards, Ill buy them!!!! P.M me with shipping cost to (Ft. Worth TX 76133)
__________________
...try'n to be a little! This is a great site. http://67-72chevytrucks.com/vboard/s...d.php?t=157669 http://www.67-72chevytrucks.com/vboa...d.php?t=375640 Last edited by N2GMTrux; 04-30-2007 at 09:14 AM. Reason: forgot shipping info |
04-30-2007, 09:08 AM | #35 | |
Can't ReMember
Join Date: Dec 2006
Location: Orlando area
Posts: 258
|
Re: Parting out, 71 burb.
Quote:
Thanks
__________________
Adversity doesn't test your character; it reveals it. 71 C-10 LWB 350/TH350. I purchased it in 1978 for $1400. I'm currently abusing it daily. (when it's running ) |
|
04-30-2007, 09:52 AM | #36 |
Roadtrip!
Join Date: Feb 2003
Location: Grand Rapids MN
Posts: 13,746
|
Re: Parting out, 71 burb.
Badpeanut, i can check it out for you.
N2gmtrux, one gaurd has some issues like it was hit. I think if you reattach the pad, most people wouldn't notice other than some missing chrome. We will give down south a little more time to decide. 71 mutt, sending pm.
__________________
67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto |
04-30-2007, 07:57 PM | #37 |
Senior Member
Join Date: Feb 2006
Location: Lilburn Georgia
Posts: 1,240
|
Re: Parting out, 71 burb.
I'll pass on the gaurds thanks anyway Mike
|
04-30-2007, 08:34 PM | #38 |
Registered User
Join Date: Apr 2007
Location: Miami
Posts: 12
|
Re: Parting out, 71 burb.
Got any a/c parts? Rear a/c housing?
|
04-30-2007, 11:07 PM | #39 |
Roadtrip!
Join Date: Feb 2003
Location: Grand Rapids MN
Posts: 13,746
|
Re: Parting out, 71 burb.
72gmc, all the a/c was missing when i got it...
n2gmtrux, The front gaurds are yours if you want them.
__________________
67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto |
04-30-2007, 11:46 PM | #40 |
Registered User
Join Date: Dec 2006
Location: Trinidad, Colorado
Posts: 642
|
Re: Parting out, 71 burb.
Sorry, WAY TOO MUCH TO SHIP.
Thanks anyway, A......
__________________
69' 3/4 4X4 470ci BBC 700 HP.... D60/14bolt 205/465 http://profile.myspace.com/index.cfm...ndid=127691959 |
05-01-2007, 08:05 AM | #41 |
Registered User
Join Date: Jan 2007
Location: Fort Worth, TX 76133
Posts: 406
|
Re: Parting out, 71 burb.
Do you think its repairable damage to the bumperguard,,, which a chrome shop could repair. And is all parts included other than bolts which were cut off. Can I see a picture of the damaged bumperguard.
__________________
...try'n to be a little! This is a great site. http://67-72chevytrucks.com/vboard/s...d.php?t=157669 http://www.67-72chevytrucks.com/vboa...d.php?t=375640 |
05-01-2007, 08:01 PM | #42 |
Roadtrip!
Join Date: Feb 2003
Location: Grand Rapids MN
Posts: 13,746
|
Re: Parting out, 71 burb.
N2, the damaged one is the closest in the pic. If you look close you can see where the chrome is missing. They are nothing i would put on a show truck. They would dress up your everyday driver. They didn't look too bad when they were on the burb, but i never looked them over close either. Let me know if you want more pics. Eric
__________________
67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto |
05-01-2007, 11:00 PM | #43 |
Roadtrip!
Join Date: Feb 2003
Location: Grand Rapids MN
Posts: 13,746
|
Re: Parting out, 71 burb.
More pics: Posi unit looks fine from what i can see. No water or anything that i saw.
Bumper gaurd pics for N2. Hope these pics are good enough to see. I think the one gaurd had a light hit. It looks rolled in a little bit. Let me know, Eric
__________________
67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto |
05-02-2007, 07:46 PM | #44 |
Roadtrip!
Join Date: Feb 2003
Location: Grand Rapids MN
Posts: 13,746
|
Re: Parting out, 71 burb.
TTT, then off to e-bay. Offers may be considerd. Eric
__________________
67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto |
05-03-2007, 01:58 PM | #45 |
Registered User
Join Date: Jan 2007
Location: Fort Worth, TX 76133
Posts: 406
|
Re: Parting out, 71 burb.
I'll take the bumperguards,,,,, P.M. me with mailing info will be paying by bank M.O.
__________________
...try'n to be a little! This is a great site. http://67-72chevytrucks.com/vboard/s...d.php?t=157669 http://www.67-72chevytrucks.com/vboa...d.php?t=375640 |
05-03-2007, 03:11 PM | #46 |
Senior Member
Join Date: Feb 2005
Location: Maynardville, Tn
Posts: 3,030
|
Re: Parting out, 71 burb.
If the board transport thing gets going I would like to have the bucket seats if they are still available.
__________________
SEMA Network- Protect our Hobby! 71 C30 in pieces, starting to come together. Click here for A Place For Tennessee Truck Enthusiest To Meet |
05-03-2007, 08:54 PM | #47 |
Roadtrip!
Join Date: Feb 2003
Location: Grand Rapids MN
Posts: 13,746
|
Re: Parting out, 71 burb.
N2, sending pm.
Woodridge, if you can arrange everything, they can sit here for a bit. Let me know if you want to try. Eric
__________________
67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|