PA So 1 more 72 blazer going under the knife

[1rippen6]

Originally Posted by 1972 Jimmy

Dwayne,
What shape is the gas tank mounting hardware in?? (U Bolts, Brakets and straps) Also, Would you be willing to cut off the gas tank filler neck?
Thanks,
Eric

Dropped the tank tonight it was missing one of the spacer but I have one from the other blazer I'm parting (I'm assuming that is what you are calling the bracket). U bolt looks to be correct it was bolted on both sides of the strap so I didn't get the other set off yet will do that tomorrow I've been real busy sorry for the delay.I have 2 sets of straps so I'm sure I can find a decent set out of the 4. I'm assuming you need the little square plates that go on before the nuts but after the straps also is that correct. Tank neck looks nice I normally get 50 for a good used tank so if you want the neck for 50 I will cut it off. I will get you pictures of everything tomorrow. I do have a neck from a toasted tank but the neck is no good either may be able to use it as a pattern I will give it to you if you want to pay shipping up to you. I was thinking of trying to have someone make them to sale but have to much on my plate to worry about it. LOL

[1972 Jimmy]

Originally Posted by 1rippen6

Dropped the tank tonight it was missing one of the spacer but I have one from the other blazer I'm parting (I'm assuming that is what you are calling the bracket). U bolt looks to be correct it was bolted on both sides of the strap so I didn't get the other set off yet will do that tomorrow I've been real busy sorry for the delay.I have 2 sets of straps so I'm sure I can find a decent set out of the 4. I'm assuming you need the little square plates that go on before the nuts but after the straps also is that correct. Tank neck looks nice I normally get 50 for a good used tank so if you want the neck for 50 I will cut it off. I will get you pictures of everything tomorrow. I do have a neck from a toasted tank but the neck is no good either may be able to use it as a pattern I will give it to you if you want to pay shipping up to you. I was thinking of trying to have someone make them to sale but have to much on my plate to worry about it. LOL

Dwayne,
I would need the whole setup! i would be interested in the entire gas tank as well. I currently have a hickey / Aero tank that I'm thinking about replacing with stock version. Pictures would be awesome! No rush! whenever you can get to it. I understand
Eric

[Tumbleweed1C4]

Rip, zip for shipping on wheel is 49735 again so you don't have to go look for it. Send me your Paypal info and I will pick up the fees and get you paid.

[1rippen6]

Originally Posted by Tumbleweed1C4

Rip, zip for shipping on wheel is 49735 again so you don't have to go look for it. Send me your Paypal info and I will pick up the fees and get you paid.

21 for shipping will pm my PP info

[1rippen6]

Originally Posted by 1972 Jimmy

Dwayne,
I would need the whole setup! i would be interested in the entire gas tank as well. I currently have a hickey / Aero tank that I'm thinking about replacing with stock version. Pictures would be awesome! No rush! whenever you can get to it. I understand
Eric

I broke the U bolt trying to remove a nut should have split it but here are the pictures. Tank is junk the vent line broke out of the top on the PS didn't even notice last night removed the sender and it is rusty inside.

[1972 Jimmy]

Originally Posted by 1rippen6

I broke the U bolt trying to remove a nut should have split it but here are the pictures. Tank is junk the vent line broke out of the top on the PS didn't even notice last night removed the sender and it is rusty inside.

How much for the gas tank neck cut off the tank, straps, plates, ubolts and square nuts shipped to 48623

[1rippen6]

Originally Posted by 1972 Jimmy

How much for the gas tank neck cut off the tank, straps, plates, ubolts and square nuts shipped to 48623

I talked to my buddy last night he wants the glass how does all the tank hardware straps, spacers, nut plates and shipping for the glass shipped so basically even trade. Gas tank neck 35 and I will throw it in the same box sound fair.

[1972 Jimmy]

Originally Posted by 1rippen6

I talked to my buddy last night he wants the glass how does all the tank hardware straps, spacers, nut plates and shipping for the glass shipped so basically even trade. Gas tank neck 35 and I will throw it in the same box sound fair.

I like the trade idea. I would feel better if we could do $25 plus the glass for all the tank hardware straps, spacers, nut plates and gas tank neck.
Lmk,
Eric
T

[1rippen6]

Originally Posted by 1972 Jimmy

I like the trade idea. I would feel better if we could do $25 plus the glass for all the tank hardware straps, spacers, nut plates and gas tank neck.
Lmk,
Eric
T

That will work I'll pm PP info later today.