RideTech's New C10 CoilOver Kits

[JohnJ@RideTech]

Originally Posted by YoungPup1977

Can I apply this to my 1972 blazer....I am converting from 4x4 to 2wd. Any way i can just buy the rear "upper" shock cross member ? I believe CPP sells them.

Possibly. I do know there are a few components that are compatible from one vehicle to the next but you may want to check spring rates and see if they vary from one vehicle to the next. We have multiple spring rates available to us as well as a spring rate calculator to help us configure exactly what you need. Most of the pieces in the kits are available for individual purchase.

Feel free to contact me if you have questions about any of the products in our coil over or StreetGrip kits. I have included a link below to both, check them out and let me know what you think.

71-71 Coil Over: http://www.ridetech.com/store/product-3297.html

63-72 StreetGrip: http://www.ridetech.com/store/1963-1...ip-system.html

[MCB Matt]

Sorry for the delay, I didn't get the notification when you asked about the Blazer. The 4 link kit Ridetech offers will not work as a bolt in. I can and has been installed by many but you will need to modify it quite a bit.

MCB

[YoungPup1977]

Originally Posted by JohnJ@RideTech

Possibly. I do know there are a few components that are compatible from one vehicle to the next but you may want to check spring rates and see if they vary from one vehicle to the next. We have multiple spring rates available to us as well as a spring rate calculator to help us configure exactly what you need. Most of the pieces in the kits are available for individual purchase.

Feel free to contact me if you have questions about any of the products in our coil over or StreetGrip kits. I have included a link below to both, check them out and let me know what you think.

71-71 Coil Over: http://www.ridetech.com/store/product-3297.html

63-72 StreetGrip: http://www.ridetech.com/store/1963-1...ip-system.html

The links you provided are for C10's and nothing for blazers....I dont really want to buy c10 stuff and cut it up to fit a blazer. The blazer frame is a bit narrower than a c10. Maybe its time for me to build a kit and start selling it for the blazer....

[JohnJ@RideTech]

Originally Posted by YoungPup1977

The links you provided are for C10's and nothing for blazers....I dont really want to buy c10 stuff and cut it up to fit a blazer. The blazer frame is a bit narrower than a c10. Maybe its time for me to build a kit and start selling it for the blazer....

You are correct. From what I understand, some parts are interchangeable from the C10 to the Blazer but we have never exchanged any of the pieces from one to the other here in house.
I love the way a dropped blazer looks, you will have something different when you get done. Let me know if I can be of any help.