1972 c10 om 2001 tahoe 4x4 chassis

[freemoto_xxx]

Originally Posted by thetucks

Can you post some more pictures and details on what you did with the radiator core support, hood latch, headlight buckets, etc? and how you attatched the fenders? thanks

I used the Tahoe core-support and used parts of the 72 support for the fenders. I didn't like the way it turned out so I'm going to redo it and just use a 1972 core-support

[freemoto_xxx]

I can't get this gap any better

[kehstr]

Originally Posted by freemoto_xxx

I can't get this gap any better

that gap would have been considered excellent by GM standards. If the gap is even the whole way down (or as close as you can get it), and the body lines line up, you just have to call it done. If you got every gap on these trucks perfect you would spend a solid month just on the panel allignment.

[thetucks]

Originally Posted by freemoto_xxx

I used the Tahoe core-support and used parts of the 72 support for the fenders. I didn't like the way it turned out so I'm going to redo it and just use a 1972 core-support

would you mind posting a pic of your magic? thanks