The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 99-06 GMT800 Chevy and GMC Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 03-05-2020, 09:36 AM   #1
MalibuSSwagon
Registered User
 
Join Date: Sep 2009
Location: Weare,NH
Posts: 1,590
Re: A couple of questions about the 99-06's

I used the same core support to put the GMC front end on my 03 Silverado. You likely just have to adjust the panels once you unbolt stuff the alignment changes.
MalibuSSwagon is offline   Reply With Quote
Old 03-09-2020, 10:48 PM   #2
slimneverdies
Registered User
 
slimneverdies's Avatar
 
Join Date: Apr 2006
Location: Miami now in Vegas
Posts: 828
Re: A couple of questions about the 99-06's

Quote:
Originally Posted by MalibuSSwagon View Post
I used the same core support to put the GMC front end on my 03 Silverado. You likely just have to adjust the panels once you unbolt stuff the alignment changes.
Ok. That’s the one thing I haven’t done. I figured since the gmc front clip was perfect aligned that I probably should leave the front core support where it was. I’m just going to loosen the entire front...
__________________
Long live SLIM
------------------
At least try to buy American
slimneverdies is offline   Reply With Quote
Old 03-12-2020, 09:58 AM   #3
bennylava
Registered User
 
bennylava's Avatar
 
Join Date: Jul 2017
Location: Texas
Posts: 396
Re: A couple of questions about the 99-06's

Quote:
Originally Posted by biketopia View Post
The GMC kept that style front end all the way through from 01-07. I like the dashs better in the 03 & up trucks but it's really preference i suppose.
Hmm... makes me wonder. Would it be easier to just buy an 07 GMC and swap it to the Chevy front end? I like the headlights better.
bennylava is offline   Reply With Quote
Old 03-12-2020, 11:20 AM   #4
biketopia
Senior Member
 
Join Date: Jul 2015
Location: Warrenton VA
Posts: 1,018
Re: A couple of questions about the 99-06's

Quote:
Originally Posted by bennylava View Post
Hmm... makes me wonder. Would it be easier to just buy an 07 GMC and swap it to the Chevy front end? I like the headlights better.
Or an 07 classic Chevy, they are literately the same truck, only thing different was available colors and the badges in and on the truck.

Or do you just like the 01-02 Chevy grill? If that's the case it would swap right in to an 07 GMC.
__________________
71 c-10 Long Bed, under the knife for a No Limit Engineering Wide Ride Chassis Pack and coil over static drop.

07 Silverado Classic 2wd

95 Camaro 427SBC/TH350
biketopia is offline   Reply With Quote
Old 03-19-2020, 05:53 AM   #5
bennylava
Registered User
 
bennylava's Avatar
 
Join Date: Jul 2017
Location: Texas
Posts: 396
Re: A couple of questions about the 99-06's

Quote:
Originally Posted by biketopia View Post
Or an 07 classic Chevy, they are literately the same truck, only thing different was available colors and the badges in and on the truck.

Or do you just like the 01-02 Chevy grill? If that's the case it would swap right in to an 07 GMC.
I guess I've never heard of an 07 Classic Chevy. If I got an 07 GM, I'd want to swap the headlights as well as the grille. I'd want to make it look like a 2002 chevy truck, as that is the one I like best. I was just curious if there were any perks to having a newer truck, such as the 06-07.

That and it may be easier to find a newer truck with lower mileage. But then again... it may not really matter. They're both pretty old by now.
bennylava is offline   Reply With Quote
Old 03-19-2020, 07:29 AM   #6
biketopia
Senior Member
 
Join Date: Jul 2015
Location: Warrenton VA
Posts: 1,018
Re: A couple of questions about the 99-06's

Quote:
Originally Posted by bennylava View Post
I guess I've never heard of an 07 Classic Chevy. If I got an 07 GM, I'd want to swap the headlights as well as the grille. I'd want to make it look like a 2002 Chevy truck, as that is the one I like best. I was just curious if there were any perks to having a newer truck, such as the 06-07.

That and it may be easier to find a newer truck with lower mileage. But then again... it may not really matter. They're both pretty old by now.
There was a body and design change in 07 with the GM trucks, the classic was the same 01-07, 07.5-10 is the newer body style. the 01-02 Chevy, and the 01-07 GMC have the same front end. GMC never adopted the cat eye front end the the Chevy's did in 03 and up. I would wan't the newest truck I could get of that vintage. As stated earlier in the this thread the canbus protocol changed in the middle of those model years as well. If you like the 01-02 chevy front end, find a GMC truck up to the 07 model year.
__________________
71 c-10 Long Bed, under the knife for a No Limit Engineering Wide Ride Chassis Pack and coil over static drop.

07 Silverado Classic 2wd

95 Camaro 427SBC/TH350
biketopia is offline   Reply With Quote
Old 03-19-2020, 08:20 AM   #7
hatzie
Moderator
 
hatzie's Avatar
 
Join Date: Oct 2008
Location: Wentworth, NH
Posts: 4,927
Re: A couple of questions about the 99-06's

Quote:
Originally Posted by biketopia View Post
There was a body and design change in 07 with the GM trucks, the classic was the same 01-07, 07.5-10 is the newer body style. the 01-02 Chevy, and the 01-07 GMC have the same front end. GMC never adopted the cat eye front end the the Chevy's did in 03 and up. I would wan't the newest truck I could get of that vintage. As stated earlier in the this thread the canbus protocol changed in the middle of those model years as well. If you like the 01-02 chevy front end, find a GMC truck up to the 07 model year.

The 8,600 GVW and above SUV, Fullsize Vans, and Pickups got GM CAN Buss on 2004 and later chassis.
The 1/2 ton Silverado and Sierra got GM CAN Buss in 2006.
http://www.auterraweb.com/aboutcan.html

Continuing production of the prior chassis after the new one is being sold is nothing new for GM. The T400 continued for two or three years after sales of the T800 began. The RV squarebodies continued being produced for four after GMT400 sales began.
__________________
1959 M35A2 LDT465-1D SOLD
1967 Dodge W200 B383, NP420/NP201 SOLD
1969 Dodge Polara 500 B383, A833 SOLD
1972 Ford F250 FE390, NP435/NP205 SOLD
1976 Chevy K20, 6.5L, NV4500/NP208 SOLD
1986 M1008 CUCV SOLD
2000 GMC C2500, TD6.5L, NV4500
2005 Chevy Silverado LS 2500HD 6.0L 4L80E/NP263
2009 Impala SS LS4 V8


RTFM... GM Parts Books, GM Schematics, GM service manuals, and GM training materials...Please include at least the year and model in your threads. It'll be easier to answer your questions.
And please let us know if and how your repairs were successful.
hatzie is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:58 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com