Air conditioning updates

[TheKorndog]

Originally Posted by truckster

The lines from the compressor to the condenser and from the condenser to the evaporator are from the S10, and the line from the evaporator to the compressor is from the Silverado.

Can you work that out for me? The set of hoses are one integral unit coming off the compressor, right? Do you mean the hard line from the lower evaporator to the condenser are from a Silverado?

Thanks again-

[truckster]

Originally Posted by TheKorndog

Can you work that out for me? The set of hoses are one integral unit coming off the compressor, right? Do you mean the hard line from the lower evaporator to the condenser are from a Silverado?

Thanks again-

You're right. I forgot that I had to change over both lines to S10 lines. It required some re-bending, and I had to enlarge the opening through the core support slightly.

The vacuum is supplied from a T fitting in my manifold behind the carburetor. I do have a stock reservoir; I hadn't installed it yet when the picture was taken.

[TheKorndog]

Fan update mod link

I found that link you were talking about. I may just do it.

Thanks for the info on the a/c hoses!