Little Body Work on the Blazer/Tub - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jcfoote60 · 06-22-2005, 08:06 AM

Hey vtblazer, nice stuff! This is exactly what I want to do to my 71 Jimmy. I discovered a ton of bondo in both rear bedside panels down below the tail lights and I happen to have 72 parts blazer with perfect bed panels. It's the old If I could make one rig out of the strengths of the two.....anyway how much cutting do you have to do to remove the bed panel? Thanks for your advice

vtblazer · 06-22-2005, 08:53 AM

Quote:

Originally Posted by jcfoote60

how much cutting do you have to do to remove the bed panel?

None, just a little grinding where the bed-side meets the bed-floor.
Maybe some spot weld cutting/removing around the lower rear door pillar also.
Having the rocker out of the way will help to.

DEFIANT NCC-74205 · 04-24-2006, 01:58 PM

Any recent pics on that project? Looks great so far!!

**pound41** · 04-24-2006, 04:03 PM

Body mounts would be my thought on your door problems. I have a lot of the floor pan rockers etc. Cut out of mine. My doors close fine but I had windshield frame sag eventhough I had braced prior to cutting. I shimmed the old body mounts eventhough I know when I put the new mounts in it will change again. But it helped me with my alignment Seems like you got a pretty good handle on it

vtblazer · 04-24-2006, 07:03 PM

Quote:

Originally Posted by DEFIANT NCC-74205

Any recent pics on that project? Looks great so far!!

No, nothing new.

Had to get it out of the shop for the winter, it's still sitting outside under cover.

The only thing I did prior to the cover up was to prime the bare metal areas to protect against rust.

There's currently way to many iron's in the fire and this one doesn't really need to be done for 5/6 years anyway.
It's for my daughter when she's 16 and right now she's only 10.

swyfor5 · 05-18-2007, 01:54 AM

Man, your post's are awesome! Every pic helps me with my rebuild, and your advice is right on. Thank's alot for all your input! Any news on the S&W cage yet?

**FRENCHBLUE72** · 05-29-2005, 05:40 PM

Looks like its getting there..

71jimmy · 05-30-2005, 01:15 PM

Sweet, keep the pics coming!

vtblazer · 05-30-2005, 06:32 PM

Had some detail work to do on the area that still wasn't prepped, then it was bolt it together!
You know how that works...

It took hours to do it right.

So anyway, got it bolted into place and the tail gate installed too.

I reused all the original bolts, they were still that nice.

orangeuavol · 05-30-2005, 09:38 PM

amazing.

vtblazer · 05-31-2005, 05:51 PM

Yep, delivery.
One of our board members get's this rust free tub/doors/gate for his project.

LUV2XCLR8 · 05-31-2005, 06:05 PM

Quote:

Originally Posted by vtblazer

Yep, delivery.
One of our board members get's this rust free tub/doors/gate for his project.

Kurt, did you sell it

*newin72* · 05-31-2005, 06:05 PM

so it's for sale?

or sold?

I'm confused...

Trifelynn · 05-31-2005, 07:34 PM

Very nice Kurt. You are a great body guy...

right back at ya

vtblazer · 05-31-2005, 07:37 PM

Sorry for the confusion.

Yes, it's spoken for. As in sold. [EDIT] 5/06/05 STILL FOR SALE.

It's the best original tub I'll probably ever see.

Heading south on June 17th, anybody need anything?
Delivering the tub and picking up my panel on the way home.

LUV2XCLR8 · 05-31-2005, 07:40 PM

Quote:

Originally Posted by vtblazer

Heading south on June 17th, anybody need anything?

Delivering the tub and picking up my panel on the way home.

How far south, hey a Guy can dream can't he

vtblazer · 05-31-2005, 07:53 PM

Quote:

Originally Posted by LUV2XCLR8

How far south, hey a Guy can dream can't he

Going back to Bill Athey's place in northen VA.

You know if I were closer I'd stop in.

vtblazer · 06-06-2005, 06:16 AM

Quote:

Originally Posted by newin72

so it's for sale?

or sold?

I'm confused...

Me too.

Need to strike the "it's sold" post, didn't work out.

Now I gotta decide all over again...Do I keep it? or Do I sell it?

72c5 · 06-06-2005, 08:59 AM

Wow Kurt! you work fast! Nice......

Roberty · 06-06-2005, 08:01 PM

What happened to the cowl/dash/windshield frame areas? It's there in the earlier pics but gone in the later pictures.

vtblazer · 06-07-2005, 01:43 AM

Quote:

Originally Posted by Roberty

What happened to the cowl/dash/windshield frame areas? It's there in the earlier pics but gone in the later pictures.

They were there but just sitting in place. (notice the different color)
Look closer at the front door pillar's, not attached yet.
Could be installed pretty easily with a little more work and some welding.

vtblazer · 06-14-2005, 06:07 PM

Turns out I'm keeping this one and building it up for myself.

It'll get a 2" spring lift, zero rates, new shocks, 3/4 ton axels and a new set of 33x12.5 SSR's on some sweet old school slotted mags.

I think I'll keep it a 4spd, unless botboy finaly sends me the 700r he owes me.

Like that's gonna happen. (it did, he sent it, all's well)

Stay tuned, firewall and windshield frame are next.

LUV2XCLR8 · 06-21-2005, 12:48 PM

Quote:

Originally Posted by vtblazer

I think I'll keep it a 4spd, unless botboy finaly sends me the 700r he owes me.

Like that's gonna happen.

Hey Kurt, I have a 700r that you can have, since you found me
something I needed, just getting it there would suck, oh yea, &
it needs to be rebuilt, so it's not completely a freebie, Craig

vtblazer · 07-03-2005, 07:44 PM

Quote:

Originally Posted by vtblazer

Stay tuned, firewall and windshield frame are next.

Alright, here's the windshield frame welded up.

Progress is a good thing.

I sectioned out the extra parts of the windshield frame I had cut off and used them as jigs to hold things in place.

jcfoote60 · 06-20-2005, 10:40 PM

Wow, awesome! I have a 71 Jimmy that has a rust free inner tub outside of some rusty rockers, and an awsome outer sheet metal 72 blazer (doors back).............. the 72 blazer has a tub that you could almost step through it's so rusted!

I have been looking at plasma cutters and MIG welders thinking this is something I need to get into! I am a seasoned mechanic but no body work experience and only experience is with gas torches which is too crude for what I am planning......doing what you are doing. The Blazer rear quarters are perfect and my Jimmy has been rear ended and filled with cracking out bondo. Any tips? Am I crazy? Body shops have quoted me insane prices for doing this................... Thanks for a reality check in advance...Jim

04-24-2006, 01:58 PM	#3
DEFIANT NCC-74205 Registered User Join Date: Aug 2005 Location: POCONO MTS PA Posts: 64	Re: Little Body Work on the Blazer/Tub Any recent pics on that project? Looks great so far!!

04-24-2006, 04:03 PM	#4
pound41 Registered User Join Date: Dec 2002 Location: Northern Virginia Posts: 1,269	Re: Little Body Work on the Blazer/Tub Body mounts would be my thought on your door problems. I have a lot of the floor pan rockers etc. Cut out of mine. My doors close fine but I had windshield frame sag eventhough I had braced prior to cutting. I shimmed the old body mounts eventhough I know when I put the new mounts in it will change again. But it helped me with my alignment Seems like you got a pretty good handle on it

05-18-2007, 01:54 AM	#6
swyfor5 Registered User Join Date: May 2007 Location: Marion, Mi. Posts: 2,429	Re: Little Body Work on the Blazer/Tub Man, your post's are awesome! Every pic helps me with my rebuild, and your advice is right on. Thank's alot for all your input! Any news on the S&W cage yet?

05-29-2005, 05:40 PM	#7
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,590	Looks like its getting there.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

05-30-2005, 01:15 PM	#8
71jimmy Registered User Join Date: Mar 2004 Location: Sacramento, CA Posts: 1,084	Sweet, keep the pics coming! __________________ '71 Jimmy, 350, SM465, NP205, 2in Tuff Country lift, 33s on rallies, TBI, softtop and hardtop "If life was fair you'd be able to afford one of each and a garage large enough to house them all."

06-22-2005, 08:06 AM	#1
jcfoote60 Active Member Join Date: Jun 2005 Location: Idaho Posts: 263	Hey vtblazer, nice stuff! This is exactly what I want to do to my 71 Jimmy. I discovered a ton of bondo in both rear bedside panels down below the tail lights and I happen to have 72 parts blazer with perfect bed panels. It's the old If I could make one rig out of the strengths of the two.....anyway how much cutting do you have to do to remove the bed panel? Thanks for your advice

05-30-2005, 06:32 PM	#9
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,538	Had some detail work to do on the area that still wasn't prepped, then it was bolt it together! You know how that works... It took hours to do it right. So anyway, got it bolted into place and the tail gate installed too. I reused all the original bolts, they were still that nice. Attached Images

05-30-2005, 09:38 PM	#10
orangeuavol GO VOLS! Join Date: May 2001 Location: Knoxville, TN Posts: 725	amazing. __________________ http://1972blazer.shutterfly.com/<= blazer build pics It's called golf because all the other four letter words were taken. It's easier to ask for forgiveness than for permission.

05-31-2005, 05:51 PM	#11
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,538	Ready for Delivery Yep, delivery. One of our board members get's this rust free tub/doors/gate for his project. Attached Images

05-31-2005, 06:05 PM	#13
newin72 Account Suspended Join Date: May 2005 Location: East Texas Posts: 545	so it's for sale? or sold? I'm confused...

05-31-2005, 07:34 PM	#14
Trifelynn Registered User Join Date: May 2004 Location: Williston, North Dakota Posts: 469	Very nice Kurt. You are a great body guy... right back at ya __________________ Always looking for a 2wd blazer

05-31-2005, 07:37 PM	#15
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,538	Clear as Mud Sorry for the confusion. Yes, it's spoken for. As in sold. [EDIT] 5/06/05 STILL FOR SALE. It's the best original tub I'll probably ever see. Heading south on June 17th, anybody need anything? Delivering the tub and picking up my panel on the way home. Last edited by vtblazer; 06-07-2005 at 02:32 AM.

06-06-2005, 08:59 AM	#19
72c5 Registered User Join Date: Dec 2003 Location: Boston Posts: 311	Wow Kurt! you work fast! Nice......

06-06-2005, 08:01 PM	#20
Roberty Hot Damn - Here I Am!! Join Date: Feb 2000 Location: Ringgold, Georgia Posts: 726	What happened to the cowl/dash/windshield frame areas? It's there in the earlier pics but gone in the later pictures. __________________ My vehicles: '90 Silverado Sport '71 Chevelle SS Convertible '70 C-10 - My Grandfather bought it new - original un-restored Last edited by Roberty; 06-06-2005 at 08:02 PM.

06-14-2005, 06:07 PM	#22
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,538	Change of Plans Turns out I'm keeping this one and building it up for myself. It'll get a 2" spring lift, zero rates, new shocks, 3/4 ton axels and a new set of 33x12.5 SSR's on some sweet old school slotted mags. I think I'll keep it a 4spd, unless botboy finaly sends me the 700r he owes me. Like that's gonna happen. (it did, he sent it, all's well) Stay tuned, firewall and windshield frame are next. Last edited by vtblazer; 10-16-2006 at 07:38 AM.



Register or Log In To remove these advertisements.

06-20-2005, 10:40 PM	#25
jcfoote60 Active Member Join Date: Jun 2005 Location: Idaho Posts: 263	Wow, awesome! I have a 71 Jimmy that has a rust free inner tub outside of some rusty rockers, and an awsome outer sheet metal 72 blazer (doors back).............. the 72 blazer has a tub that you could almost step through it's so rusted! I have been looking at plasma cutters and MIG welders thinking this is something I need to get into! I am a seasoned mechanic but no body work experience and only experience is with gas torches which is too crude for what I am planning......doing what you are doing. The Blazer rear quarters are perfect and my Jimmy has been rear ended and filled with cracking out bondo. Any tips? Am I crazy? Body shops have quoted me insane prices for doing this................... Thanks for a reality check in advance...Jim

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.