'72 Blazer 4wd getting all the best

[tubbedII]

Awe man... Sorry! I didn't realize you already bought the brother's piece... I'm it would sell quick on the classifieds if you do decide to sell it though.
Posted via Mobile Device

[jstplyn331]

Originally Posted by tubbedII

Awe man... Sorry! I didn't realize you already bought the brother's piece... I'm it would sell quick on the classifieds if you do decide to sell it though.
Posted via Mobile Device

Don't be sorry, at least I know if it don't work were to go. I appreciate it more then anything. Might as well try what I got first.

[jstplyn331]

Cuttin out the little bit of Cancer there is....

[DustinU]

Looking good! Can't wait to watch this one evolve!

[jstplyn331]

Getting the New GEN IV Vintage air installed, Next the Brakes, then the Steering, then the fuel lines hopefully the Engine harness will be here and the Window guy will have the Single piece windows in

On and on and on, as the wallet get smaller. you know how it goes

[Wasted Income]

Very nice build. Subcribed.

[jstplyn331]

Just ordered the New Hydroboost system. Can not wait to start throwing it all together, as I know mock up sucks, but worth it in the end.

[Wasted Income]

Very, very nice looking hydroboost kit.

[CTENTA1]

diggin those valve covers

[jstplyn331]

Originally Posted by CTENTA1

diggin those valve covers

Yea the Coil covers are nice, but make sure you have the room to bolt them on. If I was installing a LS1 in the 2wd crossmember. I would hit the firewall and they would not work. They are as big as a big block Valve cover.

[jstplyn331]

Originally Posted by Wasted Income

Very, very nice looking hydroboost kit.

Tallon Hydrolics, Nice guy told him what I was doing and he is setting it up to send all the appropriate fittings for a LS-1 and the correct pump, with the correct steering box.

Very Very nice guy

[Wasted Income]

Originally Posted by jstplyn331

Tallon Hydrolics, Nice guy told him what I was doing and he is setting it up to send all the appropriate fittings for a LS-1 and the correct pump, with the correct steering box.

Very Very nice guy

Is this specifically made to bolt to the 67-72 firewall and use the stock pedal linkage?

[jstplyn331]

Originally Posted by Wasted Income

Is this specifically made to bolt to the 67-72 firewall and use the stock pedal linkage?

Yep, I had it bolted up and linked to the stock pedal in less then 10minutes. Just Call Tallon and the will get you everything you need for what you are doing.
It was a great experience to talk to someone that new what the motor was from the Steering is a 2wd box for the crossover steering, and then all the connections needed with the T-Splices.

[hilljob26]

thats gonna be sweet..almost every idea i was thinkin the same thing

[hilljob26]

can you get a pic of the channel which you mounted your engine mount to..i dont mean to sound like an idiot,,just tryin to see exactly what you had to do..the price of that mount is far better and looks way better then anything out there..as far as where you mounted the engine,,anychance you have a measuremnt from some point on the frame to give me an idea

[jstplyn331]

Originally Posted by hilljob26

can you get a pic of the channel which you mounted your engine mount to..i dont mean to sound like an idiot,,just tryin to see exactly what you had to do..the price of that mount is far better and looks way better then anything out there..as far as where you mounted the engine,,anychance you have a measuremnt from some point on the frame to give me an idea

The Frame, Channel. I can get a pic. But it will be awhile it is at a place getting stuff done, and I don't get there often.

If you look @ the Mount. You will see it has a bracket that slides on the end of the tube. You see the (4) bolt holes. We made a C Channel that slides in the frame notch. This allowed us to bolt that were we needed it, and then we bolted the cross member to it.

If that don't help I will try and post pictures the only ones I have right now is it sitting on the bottom rail of the frame.

[jstplyn331]

Had to upload this pic. I am a little excited to see the gauges in the Billet housing so much I could not wait to show it with the the cut out it is getting to flush mount the shift indicator, and with the powder coating, and polishing done.

I took this about a month ago, and forgot to show it off. Ow well it is getting a lot of work done right now.

[hilljob26]

are you using the newer column as well...i am pondering the idea,,as i am wanting to try using the remote locks and everything

[jstplyn331]

Originally Posted by hilljob26

are you using the newer column as well...i am pondering the idea,,as i am wanting to try using the remote locks and everything

Yeh, I think I put that on the first post. It shows I am doing an Ididit Black powder coated column.

I don't know what that has to do with Remote Locks though?

[fxdxharley]

Originally Posted by jstplyn331

Yeh, I think I put that on the first post. It shows I am doing an Ididit Black powder coated column.

I don't know what that has to do with Remote Locks though?

You can use the ididit fob for other functions like door lockes etc.

[Classic383]

I noticed the push button start! Where did you get that one from? I am looking into one too because the stock ignition switch no longer fits in mine. Awesome Build! keep the updates coming.

[jstplyn331]

Originally Posted by Classic383

I noticed the push button start! Where did you get that one from? I am looking into one too because the stock ignition switch no longer fits in mine. Awesome Build! keep the updates coming.

I did a search and found them in China, I contacted them as they are a supplier and they allowed me to purchase just one. I think it is rather good quality. I will find out soon.

I paid about 375.00

[jstplyn331]

Originally Posted by fxdxharley

You can use the ididit fob for other functions like door lockes etc.

No I am using the Remote start / Alarm Push button RFID keypad for the locks windows etc.....

[hilljob26]

how has this build been goin,,im intersted to see your progress

[jstplyn331]

Originally Posted by hilljob26

how has this build been goin,,im intersted to see your progress

Yeh no more pictures, this project has turned a corner.

I found out from the Body guy even before he got started that the frame May be tweeked, He thinks It has either seen a ditch or something. As I do not want to find out, and or put up fighting it all its life if it is true, redoing all that has been done, crossmember, etc....

I am thinking about swithing gears and using everything on my 67 truck. gotta love the interchangable parts.