MI 67-68 and 69-72 trim / moulding - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**DaHos** · 10-31-2013, 10:35 PM

Pics for see ten:

Good: Nice straight piece.
Bad: Scratches in black and 1 screw hole.

$22 shipped.

Musclerodz · 11-02-2013, 12:45 AM

did you get my pm on the grill hoops?

TheDude57 · 02-04-2015, 02:21 PM

Do you have uppers left for my 71?

**DaHos** · 02-04-2015, 02:26 PM

I believe i do still have some driver quality pieces left. Will post pic and condition thus eve.

TheDude57 · 02-04-2015, 02:29 PM

where you at in Michigan. Southwest corner for me. Saint Joseph

Number98 · 02-04-2015, 02:55 PM

I am looking for some trim for my 70 Suburban, lower black. Need:
- Passenger side front door (assume this is the same as a passenger side truck door)
- Passengers side rear, quarter panel behind rear wheel well
- Drivers side rear, quarter panel behind rear wheel well

Thanks!

**1rippen6** · 02-04-2015, 03:36 PM

Would you have any SWB lower for the very back drivers quality fine both sides prefer black but woodgrain would work?

CST10 · 02-04-2015, 06:17 PM

Do you have any grill hoops for a 68?

**DaHos** · 02-04-2015, 09:26 PM

Quote:

Originally Posted by TheDude57

where you at in Michigan. Southwest corner for me. Saint Joseph

Currently I have off both fenders, both cab corners and one bedside. All nice wo extra holes. Have som more on trucks, need to verify condition but should be able to get a complete set together. I am between Flint and Lansing. $100 picked up.

Quote:

Originally Posted by Number98

I am looking for some trim for my 70 Suburban, lower black. Need:
- Passenger side front door (assume this is the same as a passenger side truck door)
- Passengers side rear, quarter panel behind rear wheel well
- Drivers side rear, quarter panel behind rear wheel well

Thanks!

I have 1 Very nice NOS (shelf wear no packaging) black RH. I also have a fair used wood grain LH. No good RH doors. $40 shipped.

Quote:

Originally Posted by 1rippen6

Would you have any SWB lower for the very back drivers quality fine both sides prefer black but woodgrain would work?

I have 5 RH behind wheel well in Black. All aout of package NOS. Shelf wear. Also have 3 Blazer LH in front of wheel well avaiable.

Quote:

Originally Posted by CST10

Do you have any grill hoops for a 68?

Im sure I do but they are still on truck. Appear V nice but want to pull before I quote.

CST10 · 02-05-2015, 06:05 PM

Im sure I do but they are still on truck. Appear V nice but want to pull before I quote.[/QUOTE]

That's fine. After you pull them give me a quote and a few pictures of them and any damage photos. Much appreciated.

TheDude57 · 02-05-2015, 11:02 AM

can you post pics of those upper mouldings when you get time.

**1rippen6** · 02-05-2015, 12:41 PM

Thanks for looking was really looking for used stuff to complete a set I had. I think NOS will stand out like a sore thumb.

CST10 · 02-08-2015, 12:10 AM

Any luck pulling those hoops for me. Pm me how much shipped to 70737. Thanks.

Bagd72Chevy · 02-13-2015, 03:28 PM

Looking for 67 lower body line trim. Do you have any sets used/driver quality. im ok with a few dings and whatnot.
-Ryan

Mayo · 02-13-2015, 05:20 PM

Do you have any 67-68 fender and hood eye brow trim?

**DaHos** · 02-13-2015, 07:20 PM

Quote:

Originally Posted by Bagd72Chevy

Looking for 67 lower body line trim. Do you have any sets used/driver quality. im ok with a few dings and whatnot.
-Ryan

I only have the complete NOS set at this time.

Quote:

Originally Posted by Mayo

Do you have any 67-68 fender and hood eye brow trim?

I do but both are damaged, sry

jeffg1010 · 03-23-2015, 01:36 PM

Quote:

Originally Posted by Mayo

Do you have any 67-68 fender and hood eye brow trim?

Stole the words right out of my mouth...

I do but both are damaged, sry[/QUOTE]

How damaged are we talkin'? Also need 68 headlight bezels and hoops.

jondancer · 03-23-2015, 12:20 PM

Pm sent on left rear lower bed moulding in wood grain...

72 blue · 03-24-2015, 10:38 PM

Looking for chrome lower complete for long bed.....I like the 67-68 mouldings...also complete lower upper and center for my 1972 long bed...so if you have a set used in good shape for the fenders doors cab and bed ....I am guessing the 67-68 fits a 1972 model chevy ?

Thank you
Rick

PGG · 03-25-2015, 09:55 AM

Looking for K5 rear quarter interior trim panel and or their mounts.

I have a new set coming but might by another to cut for speakers
but I need the mounts regardless a full set or whatever. Thanks PG

**davem815** · 03-25-2015, 11:52 AM

Do you have upper tailgate trim available? How about lower?
Thanks, Dave

**SoCoC10** · 12-15-2015, 12:40 AM

Pm sent

yellowGT · 12-22-2015, 12:10 AM

What trim do have left for 67-68

dakattack7 · 03-08-2016, 10:26 PM

Bump, any trim left?

**DaHos** · 03-09-2016, 09:48 AM

Quote:

Originally Posted by dakattack7

Bump, any trim left?

I do, needs/wants?

10-31-2013, 10:35 PM	#1
DaHos Senior Member Join Date: Sep 2011 Location: Owosso, Michigan Posts: 2,855	Re: 67-68 and 69-72 trim / moulding Pics for see ten: Good: Nice straight piece. Bad: Scratches in black and 1 screw hole. $22 shipped. Attached Images __________________ 1967 C10 SWB Owner - Rustbelt Restorations

11-02-2013, 12:45 AM	#2
Musclerodz Senior Member Join Date: Aug 2005 Location: OKC, OK Posts: 2,365	Re: 67-68 and 69-72 trim / moulding did you get my pm on the grill hoops? __________________ Mike Redpath

02-04-2015, 02:21 PM	#3
TheDude57 Registered User Join Date: Jun 2014 Location: Saint Joseph, Michigan Posts: 40	Re: 67-68 and 69-72 trim / moulding Do you have uppers left for my 71?

02-04-2015, 02:26 PM	#4
DaHos Senior Member Join Date: Sep 2011 Location: Owosso, Michigan Posts: 2,855	Re: 67-68 and 69-72 trim / moulding I believe i do still have some driver quality pieces left. Will post pic and condition thus eve. __________________ 1967 C10 SWB Owner - Rustbelt Restorations

02-04-2015, 02:29 PM	#5
TheDude57 Registered User Join Date: Jun 2014 Location: Saint Joseph, Michigan Posts: 40	Re: 67-68 and 69-72 trim / moulding where you at in Michigan. Southwest corner for me. Saint Joseph

02-04-2015, 02:55 PM	#6
Number98 Prestige Worldwide Join Date: Feb 2001 Location: Worldwide Posts: 2,553	Re: 67-68 and 69-72 trim / moulding I am looking for some trim for my 70 Suburban, lower black. Need: - Passenger side front door (assume this is the same as a passenger side truck door) - Passengers side rear, quarter panel behind rear wheel well - Drivers side rear, quarter panel behind rear wheel well Thanks!

02-04-2015, 03:36 PM	#7
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,716	Re: 67-68 and 69-72 trim / moulding Would you have any SWB lower for the very back drivers quality fine both sides prefer black but woodgrain would work?

02-04-2015, 06:17 PM	#8
CST10 Registered User Join Date: Sep 2013 Location: Gonzales, La Posts: 1,441	Re: 67-68 and 69-72 trim / moulding Do you have any grill hoops for a 68? __________________ MyToys: Goldilocks the "Ol School Survivor" 1968 C10, SWB Stepside, 08/15 TOTM, 250 CI 6 cylinder, 3 on the tree, 3.73 rear, 3/5 static drop, 23,500 original miles. Samson the 1970 CST10, LWB, 462Ci, Turbo 350 tranny, 3.08 rear gear, PB, PS, A/C, AM/FM, 2/4 Drop. Brutus the 1998 Camaro Z28, 33,500 original miles, LS1, 519 RWHP/497 RWTQ. Member of the Louisiana Classic Truck Club, LCTC Member of the Louisiana C10 Club Member of the Baton Rouge Drifters Car Club

02-05-2015, 06:05 PM	#10
CST10 Registered User Join Date: Sep 2013 Location: Gonzales, La Posts: 1,441	Re: 67-68 and 69-72 trim / moulding Im sure I do but they are still on truck. Appear V nice but want to pull before I quote.[/QUOTE] That's fine. After you pull them give me a quote and a few pictures of them and any damage photos. Much appreciated. __________________ MyToys: Goldilocks the "Ol School Survivor" 1968 C10, SWB Stepside, 08/15 TOTM, 250 CI 6 cylinder, 3 on the tree, 3.73 rear, 3/5 static drop, 23,500 original miles. Samson the 1970 CST10, LWB, 462Ci, Turbo 350 tranny, 3.08 rear gear, PB, PS, A/C, AM/FM, 2/4 Drop. Brutus the 1998 Camaro Z28, 33,500 original miles, LS1, 519 RWHP/497 RWTQ. Member of the Louisiana Classic Truck Club, LCTC Member of the Louisiana C10 Club Member of the Baton Rouge Drifters Car Club

02-05-2015, 11:02 AM	#11
TheDude57 Registered User Join Date: Jun 2014 Location: Saint Joseph, Michigan Posts: 40	Re: 67-68 and 69-72 trim / moulding can you post pics of those upper mouldings when you get time.

02-05-2015, 12:41 PM	#12
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,716	Re: 67-68 and 69-72 trim / moulding Thanks for looking was really looking for used stuff to complete a set I had. I think NOS will stand out like a sore thumb.

02-08-2015, 12:10 AM	#13
CST10 Registered User Join Date: Sep 2013 Location: Gonzales, La Posts: 1,441	Re: 67-68 and 69-72 trim / moulding Any luck pulling those hoops for me. Pm me how much shipped to 70737. Thanks. __________________ MyToys: Goldilocks the "Ol School Survivor" 1968 C10, SWB Stepside, 08/15 TOTM, 250 CI 6 cylinder, 3 on the tree, 3.73 rear, 3/5 static drop, 23,500 original miles. Samson the 1970 CST10, LWB, 462Ci, Turbo 350 tranny, 3.08 rear gear, PB, PS, A/C, AM/FM, 2/4 Drop. Brutus the 1998 Camaro Z28, 33,500 original miles, LS1, 519 RWHP/497 RWTQ. Member of the Louisiana Classic Truck Club, LCTC Member of the Louisiana C10 Club Member of the Baton Rouge Drifters Car Club

02-13-2015, 03:28 PM	#14
Bagd72Chevy C10 Collector Join Date: Oct 2003 Location: Baton Rouge, LA Posts: 417	Re: 67-68 and 69-72 trim / moulding Looking for 67 lower body line trim. Do you have any sets used/driver quality. im ok with a few dings and whatnot. -Ryan __________________ ///Ryan 1972 Chevy C-10-Bagged, Blown LT1, 700r4, Suicide Doors 1967 GMC- SC & Cam'd 4.8, built 4l80, 3200 stall, posi, 4.10 1967 Chevy LWB- 454 and patina 1971 Blazer - Rusty 1968 Crewcab project

02-13-2015, 05:20 PM	#15
Mayo Cool Truck Join Date: Dec 2008 Location: Bowie,MD Posts: 1,869	Re: 67-68 and 69-72 trim / moulding Do you have any 67-68 fender and hood eye brow trim? __________________ 1968 Chevrolet C20 Longhorn "Cool Truck" 1937 Chevrolet Pickup - Project Looking for a patina'd 68 50th Anniversary longbed

03-23-2015, 12:20 PM	#18
jondancer Registered User Join Date: Jul 2010 Location: central michigan Posts: 1,192	Re: 67-68 and 69-72 trim / moulding Pm sent on left rear lower bed moulding in wood grain...



Register or Log In To remove these advertisements.

03-24-2015, 10:38 PM	#19
72 blue Registered User Join Date: Apr 2014 Location: Pell City, AL Posts: 86	Re: 67-68 and 69-72 trim / moulding Looking for chrome lower complete for long bed.....I like the 67-68 mouldings...also complete lower upper and center for my 1972 long bed...so if you have a set used in good shape for the fenders doors cab and bed ....I am guessing the 67-68 fits a 1972 model chevy ? Thank you Rick

03-25-2015, 09:55 AM	#20
PGG Registered User Join Date: Mar 2015 Location: Fort Worth Texas Posts: 279	Re: 67-68 and 69-72 trim / moulding Looking for K5 rear quarter interior trim panel and or their mounts. I have a new set coming but might by another to cut for speakers but I need the mounts regardless a full set or whatever. Thanks PG

03-25-2015, 11:52 AM	#21
davem815 Senior Member Join Date: Jun 2013 Location: Warren, IN Posts: 313	Re: 67-68 and 69-72 trim / moulding Do you have upper tailgate trim available? How about lower? Thanks, Dave

12-15-2015, 12:40 AM	#22
SoCoC10 Senior Member Join Date: Nov 2014 Location: Colorado Posts: 3,164	Re: 67-68 and 69-72 trim / moulding Pm sent __________________ 07' Extcab Silverado Z71 Silver Birch, 5.3L HO 71' Cheyenne C10 Hugger Orange on Saddle SWB Besides these two, too Many to count

12-22-2015, 12:10 AM	#23
yellowGT Registered User Join Date: Jan 2006 Location: Garland, TX Posts: 970	Re: 67-68 and 69-72 trim / moulding What trim do have left for 67-68 __________________ '84 swb chevy '69 swb chevy '68 swb chevy '95 Impala ss-sold '89 chevy crew cab dually 3+3

03-08-2016, 10:26 PM	#24
dakattack7 Registered User Join Date: Feb 2013 Location: az Posts: 177	Re: 67-68 and 69-72 trim / moulding Bump, any trim left?

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.