OR Parting out 72 GMC K20 4x4 350-TH350

[tll74]

Originally Posted by MATT SHIELDS

Tom, did you have a chance to look at those backing plates yet? Thanks for your help, Matt

Matt, They look good so far. I have them in my hot tank to clean them up nice for a better look.

Originally Posted by Rebo123

I'm interested in the pair of rear/rear spring hangers. How much shipped to 15377 Pa. If you still have them. It's for my 72 K10 4x4. Thanks

These are sold. I'm parting out another 4x4 next week that has them. 50.00 plus shipping. Shipping probably about 20.00.

Thanks, Tom

[MATT SHIELDS]

Originally Posted by tll74

Matt, They look good so far. I have them in my hot tank to clean them up nice for a better look.

These are sold. I'm parting out another 4x4 next week that has them. 50.00 plus shipping. Shipping probably about 20.00.

Thanks, Tom

Thanks Tom, let me know how the look when they are cleaned. If you could post some pics I would appreciate it. Thanks, Matt

[Rebo123]

Thanks Tom. If the rear/rear spring hangers are in good shape ill take them. I'm new to all of this, let me know what I need to do to get the ball rolling.

[tll74]

Originally Posted by MATT SHIELDS

Thanks Tom, let me know how the look when they are cleaned. If you could post some pics I would appreciate it. Thanks, Matt

I should be able to post pics tomorrow night.

Originally Posted by Rebo123

Thanks Tom. If the rear/rear spring hangers are in good shape ill take them. I'm new to all of this, let me know what I need to do to get the ball rolling.

They look to be fine. I will have a thread on that truck and reserve them for you or you could pay for them now and be done. It would be atleast a week before I can ship them. Send me a PM reguarding them.

Thanks, Tom

[lawest]

Tom, PM sent on a 4x4 sb fan shroud if you have one. Thanks, Larry

[Rebo123]

Tom, PM sent for the rear/rear leaf spring hangers. Thanks

[b.sharp]

Tom, If Matt passes on the backing plates. I am looking for a set and spindles to convert my '64 over to disk brakes.

[Douglas]

Do you happen to have any brake booster braces? I need the one thats about an inch wide and bolts to the firewall beneath the booster. It measures about 16" from end to end. The one for the 1/2 ton measures about 14 1/2 ".
I'm upgrading my 1/2 ton brakes and installing a larger booster and need the longer brace. I think the 3/4 and 1 ton have the longer ones. If so price to 71270. Thanks

[tll74]

pics for lawest. The shroud is a nice one with just minor fan rash as the pic shows. It has no cracks or any other damage. It has good color and looks nice. The pulleys are off a 72 350 with factory air.

[tll74]

Pics for MATT SHIELDS, I acid dipped and media blaslted the plates/shields. They have cracks where they are welded to the caliper support which was very common. I can weld them or let you. There is minor pitting from surface rust. 85.00 plus shipping. Thanks, Tom

[Krex]

do you have any ac compressor mounting brackets for 350 its for my 72 k20,

[lawest]

Originally Posted by tll74

pics for lawest. The shroud is a nice one with just minor fan rash as the pic shows. It has no cracks or any other damage. It has good color and looks nice. The pulleys are off a 72 350 with factory air.

Thanks for the pics Tom. How much are you asking for the shroud and the pulleys? Shipping to 73089. Thanks, Larry

[tll74]

Originally Posted by Douglas

Do you happen to have any brake booster braces? I need the one thats about an inch wide and bolts to the firewall beneath the booster. It measures about 16" from end to end. The one for the 1/2 ton measures about 14 1/2 ".
I'm upgrading my 1/2 ton brakes and installing a larger booster and need the longer brace. I think the 3/4 and 1 ton have the longer ones. If so price to 71270. Thanks

I'll look for you. Thanks, Tom

[b.sharp]

Tom, Do you still have the spindles from this K20 also? Again, If Matt passes on the backing plates I will take them, the spindles, and the rear frame shock mount brackets (still looking for a picture to make sure they are the same as my '64 brackets). Thanks.

[MATT SHIELDS]

Tom, I'll take the backing plates. Do you want to pm me payment info with shipping to 64158 zip & I'll send you back the shipping address. I'll be able to weld up the cracks myself. Thanks for all you help. Matt

[tll74]

Originally Posted by ashley1972

Do you still have a cab to frame mount? If so shipped to 87533. Thanks

Yes I do. 11.03 shipping plus my listed price.

Originally Posted by lawest

Thanks for the pics Tom. How much are you asking for the shroud and the pulleys? Shipping to 73089. Thanks, Larry

PM coming

Originally Posted by b.sharp

Tom, Do you still have the spindles from this K20 also? Again, If Matt passes on the backing plates I will take them, the spindles, and the rear frame shock mount brackets (still looking for a picture to make sure they are the same as my '64 brackets). Thanks.

Matt says he wants the plates. I do have another pair in the same condition and I do have the spindles from this truck. 50.00 each on the spindles. The shock mounts will be exactly the same as the ones pictured in this thead.

Originally Posted by MATT SHIELDS

Tom, I'll take the backing plates. Do you want to pm me payment info with shipping to 64158 zip & I'll send you back the shipping address. I'll be able to weld up the cracks myself. Thanks for all you help. Matt

Matt, I'll get the shipping cost tomorrow (Friday) and PM you the info.

[tll74]

Originally Posted by MATT SHIELDS

Tom, I'll take the backing plates. Do you want to pm me payment info with shipping to 64158 zip & I'll send you back the shipping address. I'll be able to weld up the cracks myself. Thanks for all you help. Matt

Matt, shipping on the plates is 22.82. Thanks, Tom

[MATT SHIELDS]

Payment is sent Tom. Thanks for your help.

[ashley1972]

Tom, I need a rear cab mount. Thanks. Ill take it shipped to 87533.

[b.sharp]

Tom, I couldn't really see the shock mounts in the far away picture taken. Can you take a close up of the mounts? Thanks. Do you know if these spindles are the same on all K20 trucks up to mid 80'2?

[ashley1972]

Payment sent. thanks Tom

[tll74]

Originally Posted by b.sharp

Tom, I couldn't really see the shock mounts in the far away picture taken. Can you take a close up of the mounts? Thanks. Do you know if these spindles are the same on all K20 trucks up to mid 80'2?

70 is a one year only (drum), 71-early 72 (disc, small u-joint, spindle has lip seal in the back) and late 72-76 (disc, large u-joint, no lip seal in spindle, has late style rubber seal on stub axle), 77-87 (K10 or K20, basicly the same as L72-76 but a bit longer in length). Not sure exactly on 69-down. I'm putting the 71 K20 in shop tomorrow. I'll get pic once on the lift.

Originally Posted by ashley1972

Payment sent. thanks Tom

Thanks! I'll get it shipped.

[john@thepier]

How much less if not?

[tll74]

Originally Posted by john@thepier

How much less if not?

John, The price is the same. I hot tank all my parts just to get them clean. Acid dipping is done as a courtesy just to make them that much nicer. I like to send nice parts. Thanks, Tom

[john@thepier]

In that case by all means dip them. John