side tool box door?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**'70_402** · 01-10-2005, 04:22 PM

can you buy a new door the side of bed tool box that were on our trucks??? i know it is a hard part to find rust free....does anyone make a replacement? or am i just screwed untill i find one or use the bondo on it????

Putter · 01-10-2005, 04:35 PM

I just freaking saw one (new one), and I am trying to relocate it. It'll come to me where I saw it. I remember it came with hinges and everything......

**'70_402** · 01-10-2005, 04:56 PM

that would be really nice. i wonder how much it was?

Putter · 01-10-2005, 05:20 PM

I can not remember. I have a stepside, so I didn't need to look at pricing. I remember flipping through a catalog, but I don't remember whos. I know it is on top of my dresser right now. It will be in the morning before I can post where I found it. (I only get online at work......I'm cheap that way)

Bob Moore · 01-10-2005, 05:33 PM

I found one in Brother's Catalog - an older one 3with the Orande Cameo on the cover. $299.95 complete - hinges, latch, catch, cable - done in fiberglass. No mention of the interior box or mounting hardware.

Putter · 01-10-2005, 05:41 PM

That may be the one I saw, but mine is a catalog that is only a couple months old at most.

mtdave2 · 01-11-2005, 01:54 AM

i would love to find one of those my self. im sure those doors are the single most rust prone spots on these trucks.. ugh!

Putter · 01-11-2005, 09:48 AM

Okay, the one I saw was in my most current Brother's catalog. They are showing it as follows:

67-72 Factory Bedside Toolbox Door (picture shows door, latch, hinges, and cable to prevent it from swinging open too far)

Part Number: TBD0072

Price: (sit down first) $299.00

**'70_402** · 01-11-2005, 10:26 AM

thanks putter. i will have to look at my catalog..

Putter · 01-11-2005, 11:01 AM

If it's the catalog with the silver late-50's burb on it, then look on page 83...bottom of page, left side.

01-10-2005, 04:22 PM	#1
'70_402 Senior Member Join Date: Dec 2003 Location: Pampa, Texas Posts: 1,554	side tool box door?? can you buy a new door the side of bed tool box that were on our trucks??? i know it is a hard part to find rust free....does anyone make a replacement? or am i just screwed untill i find one or use the bondo on it???? __________________ https://www.ebay.com/itm/295742064443

01-10-2005, 04:35 PM	#2
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	I just freaking saw one (new one), and I am trying to relocate it. It'll come to me where I saw it. I remember it came with hinges and everything...... __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**

01-10-2005, 04:56 PM	#3
'70_402 Senior Member Join Date: Dec 2003 Location: Pampa, Texas Posts: 1,554	that would be really nice. i wonder how much it was? __________________ https://www.ebay.com/itm/295742064443

01-10-2005, 05:20 PM	#4
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	I can not remember. I have a stepside, so I didn't need to look at pricing. I remember flipping through a catalog, but I don't remember whos. I know it is on top of my dresser right now. It will be in the morning before I can post where I found it. (I only get online at work......I'm cheap that way) __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**

01-10-2005, 05:33 PM	#5
Bob Moore Registered User Join Date: Feb 2004 Location: Tacoma WA Posts: 1,365	Tool Box Door I found one in Brother's Catalog - an older one 3with the Orande Cameo on the cover. $299.95 complete - hinges, latch, catch, cable - done in fiberglass. No mention of the interior box or mounting hardware. __________________ 67 C-20 LWB, tilt, speed alert, vac, 454, T400 67 C-10 SWB, factory air with more to follow

01-10-2005, 05:41 PM	#6
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	That may be the one I saw, but mine is a catalog that is only a couple months old at most. __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**

01-11-2005, 01:54 AM	#7
mtdave2 newly minted old timer Join Date: Dec 1999 Location: Hudson WI Posts: 3,507	i would love to find one of those my self. im sure those doors are the single most rust prone spots on these trucks.. ugh! __________________ ____________________________________________ 72 c20 longhorn 65k org miles and counting! 69 k10 Suburban

01-11-2005, 09:48 AM	#8
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	Okay, the one I saw was in my most current Brother's catalog. They are showing it as follows: 67-72 Factory Bedside Toolbox Door (picture shows door, latch, hinges, and cable to prevent it from swinging open too far) Part Number: TBD0072 Price: (sit down first) $299.00 __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**

01-11-2005, 10:26 AM	#9
'70_402 Senior Member Join Date: Dec 2003 Location: Pampa, Texas Posts: 1,554	thanks putter. i will have to look at my catalog.. __________________ https://www.ebay.com/itm/295742064443

01-11-2005, 11:01 AM	#10
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	If it's the catalog with the silver late-50's burb on it, then look on page 83...bottom of page, left side. __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.