How about some pics of bagged C-10's - The 1947 - Present Chevrolet & GMC Truck Message Board Network

azfab · 08-28-2007, 10:31 PM

lay it low.[IMG]

[/IMG]

bodydropped68 · 08-30-2007, 10:57 AM

here's one for you

Jcentsr6 · 08-30-2007, 01:52 PM

Here is mine

IvelDesigns · 08-30-2007, 06:52 PM

my daily driver. 76 days and counting....

Rokcrln · 08-31-2007, 10:31 AM

Well here is my bagged 10 but it is comming apart as we speak to give life to two other vehicals.

Kevin
LFD Inc.

Spray-Bomb · 08-31-2007, 10:55 AM

Noooooooooo, don't take it apart that thing is sweeet !!!!

Heres mine, only bagged in the front but soon in the back

bodydropped68 · 08-31-2007, 05:33 PM

Quote:

Originally Posted by SCOTI

Cool. Stats?

thanks scoti, Stats bagged,stock floor bodydrop, 4 link,4 wheel disc, 12 bolt posi 4.10 gears, two 3/4 hp compressors,four air tanks,FBSS, bed floor raised now 8 inches deep, crate 350/700r4,KMC SS 20x8.5 wheels,245 40 20 front 285 50 20 in the rear. that's some of it later, paul

camaro__thunder · 09-03-2007, 08:51 PM

04 orange · 09-03-2007, 10:25 PM

Here's mine.

shifty · 09-03-2007, 11:42 PM

Quote:

Originally Posted by IvelDesigns

my daily driver. 76 days and counting....

more info on wheels and tires (and caps?), what arms and spindles you're using?

SCOTI · 09-04-2007, 04:40 PM

Quote:

Originally Posted by bodydropped68

thanks scoti, Stats bagged,stock floor bodydrop, 4 link,4 wheel disc, 12 bolt posi 4.10 gears, two 3/4 hp compressors,four air tanks,FBSS, bed floor raised now 8 inches deep, crate 350/700r4,KMC SS 20x8.5 wheels,245 40 20 front 285 50 20 in the rear. that's some of it later, paul

I like it.... post up more pics if you have any.

IvelDesigns · 09-05-2007, 10:21 AM

well, i was waiting to reply so i could go out and look to see what size tires i'm running, but i can roughly guess somewhere around a 245-70-15 for the tire. some cheap brand i'm pretty sure.

the wheels are your standard 15" steelies with baby moon hub caps and the thinner trim rings.

I'm running 2.5" drop spindles and factory arms. out back i have 2.5" blocks, and a notched frame, but the blocks are kinda pointless since the axle hits the frame long before the bag bottoms out.

Spray-Bomb · 09-05-2007, 11:50 PM

Mikes truck

bodydropped68 · 09-07-2007, 04:46 PM

Quote:

Originally Posted by SCOTI

I like it.... post up more pics if you have any.

heres some more pics

BACKYARD88 · 09-07-2007, 05:12 PM

I'm a late bloomer, here's a couple more of mine

Frizzle Fry · 09-07-2007, 05:33 PM

Still fine-tuning my levitation device...

abadsvt · 09-07-2007, 08:10 PM

Hey Frizzle that thing looks SICK!!!! I like it alot!

Here is my project but i am going to be swapping out the frame for a new one once i get it built because i am going to be using a complete c5 corvette supsension, motor and transaxle!

Josh

camaro__thunder · 09-12-2007, 12:18 PM

Heres 2 more

Spray-Bomb · 09-12-2007, 06:44 PM

Quote:

Originally Posted by steveo10

spraybomb, what do you want to know or see? i have alot of pics but i never put any up for a build thread cause i just kinda did it and took pics along the way. i didn't really think i needed a buildup.

Well what all did you do to get it down & how far is you front rocker from the ground

A link to your photobucket will suffice

**FRENCHBLUE72** · 09-16-2007, 07:46 PM

heres mine........................

steveo10 · 09-17-2007, 12:44 PM

heres some pics of my rear set-up. just a kp notch and a suicide doors superlift 4 link.

FnLow69 · 09-17-2007, 01:23 PM

Heres mine so far.....

Heres the rear suspension... minus the air valves there going on the tanks..

Film Guy · 09-17-2007, 11:36 PM

Here's mine. Sorry no new pics. Truck is @ Stoked Out getting some mods done. I think N2TRUX may have a newer pic

steveo10 · 09-17-2007, 11:40 PM

Quote:

Originally Posted by Spray-Bomb

What did you do to get the front down & does the rear go lower that the front @ dump ??? if so how much

Thanks

Sorry to thread jack

the front is just the suicide doors front kit and i cut down the cups. i hate to say it but the front is all the way down and is sitting on the inside edge of the fender. i think i'm going to cut the fenders to see if it will go any lower.

dan468 · 09-20-2007, 08:18 PM

Anyone else think it's funny that not too many of us have "complete" bagged C10s

08-28-2007, 10:31 PM	#1
azfab Registered User Join Date: Aug 2007 Location: lodi ca Posts: 251	How about some pics of bagged C-10's lay it low.[IMG][/IMG]

08-30-2007, 10:57 AM	#2
bodydropped68 Registered User Join Date: Jun 2006 Location: Tucson, Az Posts: 705	Re: post all bagged c10 here here's one for you Attached Images

08-30-2007, 01:52 PM	#3
Jcentsr6 Junior Member Join Date: Jul 2007 Location: Odenton, Md Posts: 552	Re: post all bagged c10 here Here is mine Attached Images __________________ going to sell this one...looking for a SWB project next.

08-30-2007, 06:52 PM	#4
IvelDesigns Commander Taco Bello Join Date: Sep 2006 Location: Des Moines, Iowa Posts: 2,232	Re: post all bagged c10 here my daily driver. 76 days and counting.... __________________ Bagged '50 3600 - Bumper punchin' road kill since 2009... Bagged '69 C10 Longbed - Bumper punchin' road kill since 2007... Last edited by IvelDesigns; 08-30-2007 at 06:53 PM.

08-31-2007, 10:31 AM	#5
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Re: post all bagged c10 here Well here is my bagged 10 but it is comming apart as we speak to give life to two other vehicals. Kevin LFD Inc. Attached Images

08-31-2007, 10:55 AM	#6
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: post all bagged c10 here Noooooooooo, don't take it apart that thing is sweeet !!!! Heres mine, only bagged in the front but soon in the back __________________ Just not low enough... ----------------------------- Sinister Killer

09-03-2007, 08:51 PM	#8
camaro__thunder Epoxy Primer Friendly Join Date: Feb 2004 Location: South of Houston TEXXXAS Posts: 680	Re: post all bagged c10 here __________________ My Project 69 SWB SHAVED BAGGED DOORED

09-03-2007, 10:25 PM	#9
04 orange Registered User Join Date: Sep 2006 Location: Midlothian, Tx Posts: 144	Re: post all bagged c10 here Here's mine. Attached Images

09-05-2007, 10:21 AM	#12
IvelDesigns Commander Taco Bello Join Date: Sep 2006 Location: Des Moines, Iowa Posts: 2,232	Re: post all bagged c10 here well, i was waiting to reply so i could go out and look to see what size tires i'm running, but i can roughly guess somewhere around a 245-70-15 for the tire. some cheap brand i'm pretty sure. the wheels are your standard 15" steelies with baby moon hub caps and the thinner trim rings. I'm running 2.5" drop spindles and factory arms. out back i have 2.5" blocks, and a notched frame, but the blocks are kinda pointless since the axle hits the frame long before the bag bottoms out. __________________ Bagged '50 3600 - Bumper punchin' road kill since 2009... Bagged '69 C10 Longbed - Bumper punchin' road kill since 2007...

09-05-2007, 11:50 PM	#13
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: post all bagged c10 here Mikes truck __________________ Just not low enough... ----------------------------- Sinister Killer

09-07-2007, 05:12 PM	#15
BACKYARD88 On the fast track to nowhere.. Join Date: May 2006 Location: Splendora, Texas Posts: 5,316	Re: post all bagged c10 here I'm a late bloomer, here's a couple more of mine __________________ -Mike Owen- Support the board here! 71 Chevy short fleet build thread Double D Norwood, Houston, Cecilia, Jackson, Monroe and counting

09-07-2007, 05:33 PM	#16
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: post all bagged c10 here Still fine-tuning my levitation device... Attached Images

09-07-2007, 08:10 PM	#17
abadsvt Senior Member Join Date: Aug 2006 Location: Atascadero, CA Posts: 1,152	Re: post all bagged c10 here Hey Frizzle that thing looks SICK!!!! I like it alot! Here is my project but i am going to be swapping out the frame for a new one once i get it built because i am going to be using a complete c5 corvette supsension, motor and transaxle! Josh Attached Images __________________ (Project truck) 1970 C10 under complete transformation My current build thread http://67-72chevytrucks.com/vboard/s...d.php?t=212871 Other project: C5 corvette swap into 70 c10 http://67-72chevytrucks.com/vboard/s...=1#post2413517 On Hold

09-12-2007, 12:18 PM	#18
camaro__thunder Epoxy Primer Friendly Join Date: Feb 2004 Location: South of Houston TEXXXAS Posts: 680	Re: post all bagged c10 here Heres 2 more Attached Images __________________ My Project 69 SWB SHAVED BAGGED DOORED

09-16-2007, 07:46 PM	#20
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: post all bagged c10 here heres mine........................ Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..



Register or Log In To remove these advertisements.

09-17-2007, 12:44 PM	#21
steveo10 Registered User Join Date: Jan 2006 Location: central indiana Posts: 128	Re: post all bagged c10 here heres some pics of my rear set-up. just a kp notch and a suicide doors superlift 4 link. Attached Images

09-17-2007, 01:23 PM	#22
FnLow69 Registered User Join Date: May 2005 Location: Washington Posts: 848	Re: post all bagged c10 here Heres mine so far..... Heres the rear suspension... minus the air valves there going on the tanks.. __________________ [PROJECT] FnLow69- 69 C-10 Full frame & layin' doors [PROJECT] Laidout53 - 53' Dodge Pickup, Full Kustom Build [PROJECT] "Hot Rod" 1931 Model A Bonneville style "Dream as if you'll live forever, Live as if you'll die today" ~ James Dean

09-17-2007, 11:36 PM	#23
Film Guy Junior Member Join Date: Aug 2004 Location: Dallas, Tx Posts: 105	Re: post all bagged c10 here Here's mine. Sorry no new pics. Truck is @ Stoked Out getting some mods done. I think N2TRUX may have a newer pic Attached Images

09-20-2007, 08:18 PM	#25
dan468 Registered User Join Date: Nov 2006 Location: Sun City, Arizona Posts: 430	Re: post all bagged c10 here Anyone else think it's funny that not too many of us have "complete" bagged C10s Attached Images __________________ 68 C-10 Build thread http://67-72chevytrucks.com/vboard/s...d.php?t=414699

Register or Log In To remove these advertisements.