Powdercoating - The 1947 - Present Chevrolet & GMC Truck Message Board Network

70cst10 · 01-01-2003, 05:11 PM

I think I've had enough sandblasting.. I've got it in my ears, my pockets and everywhere else! I've decided to have a pro do the job for me.. What should I expect to have a rolling frame (swb with coils) blasted and powdercoated? I've finished sandblasting most of the frame. It's fairly rust free, but the litttle spots are driving me mad. How long does it usually take to get it back?

70chevy · 01-01-2003, 07:24 PM

I paid $210 for the blasting and $450 for the powdercoating. I paid an additional $50 for the Belltech drop spindles. I had the frame and all the suspension parts like the trailing arms, upper and lower a-arms, crossmembers, etc.
This was done in Gastiona, NC. I not how close that is to Goose Creek. I know of a Goose Creek airport, not sure if this is the same area.

jmanz69 · 01-01-2003, 10:25 PM

I had two different places quote me $210 for my frame and suspension parts. Didn't get a quote on powdercoating since I can't find anyone locally that has an oven big enought for a truck frame. But I haven't been looking very hard either.

72ChevyCheyenne · 01-01-2003, 11:27 PM

I had mine done in Atlanta for $500.00. This was the frame, crossmembers, trailing arms and upper/lower control arms.

minibike · 01-01-2003, 11:39 PM

$750 is the going rate for blasting and coating in Louisiana, You may save a little, if they can see how much blasting you have already done.

**BIG ORANGE** · 01-01-2003, 11:53 PM

The more color's you have in powdercoating the more cost. I had 3 different color's with PROJECT ORANGE the springs are orange and the spindels are silver,all Ubolts are silver also. Ever time they change pigment it cost so ask for a detailed quote up front before leaving your stuff. I paid 550.00 to get everthing powdercoated and 200 for sandblasting even sandblasted afew things myself, if you need some powdercoating done let me know the company is in RockHill S.C. ,hope this helps!

01-01-2003, 05:11 PM	#1
70cst10 Senior Member Join Date: Jun 2001 Location: Gaston, SC Posts: 580	Powdercoating I think I've had enough sandblasting.. I've got it in my ears, my pockets and everywhere else! I've decided to have a pro do the job for me.. What should I expect to have a rolling frame (swb with coils) blasted and powdercoated? I've finished sandblasting most of the frame. It's fairly rust free, but the litttle spots are driving me mad. How long does it usually take to get it back? __________________ Milan 1964 Chevelle SS 283/M20

01-01-2003, 07:24 PM	#2
70chevy Registered User Join Date: Aug 2001 Location: Cherryville, NC Posts: 147	Powdercoating I paid $210 for the blasting and $450 for the powdercoating. I paid an additional $50 for the Belltech drop spindles. I had the frame and all the suspension parts like the trailing arms, upper and lower a-arms, crossmembers, etc. This was done in Gastiona, NC. I not how close that is to Goose Creek. I know of a Goose Creek airport, not sure if this is the same area. __________________ Ken Smith 99 C5 Torch Red Coupe 85 Chevy Candy Apple 70 Chevy 1/2 in process.Semi-gloss black powdercoated frame & suspension, disc brakes up front, 3" drop spindle(Beltech) 5 lug 3.73 rearend, ZZ4, Sanderson headers, 700R4, Air Ride system, Summitt 16 gal fuel cell, Holly mech. fuel pump,

01-01-2003, 11:27 PM	#4
72ChevyCheyenne Registered User Join Date: May 2002 Location: Woodstock, GA USA Posts: 300	I had mine done in Atlanta for $500.00. This was the frame, crossmembers, trailing arms and upper/lower control arms. __________________ Bill Durham http://home.attbi.com/~bulldurham 72 Cheyenne Restoration in progress Currently: frame sand blasted and powdercoated, Inline Tube brake and fuel lines, Blazer tank in rear, Holley Red electronic fuel pump, Eaton posi with 3.42 gears, 2 1/2" drop front spindles, 4" drop rear springs with adjustable panhard bar, KYB shocks, ZZ 502/502 GM Performance crate engine, Zoops brackets and pulleys, Vintage Air, dual electric fans, Ram Air II hood and late model sport side bed.

01-01-2003, 11:39 PM	#5
minibike Registered User Join Date: Jun 2002 Location: Lafayette, LA Posts: 500	$750 is the going rate for blasting and coating in Louisiana, You may save a little, if they can see how much blasting you have already done. __________________ 69 SWB LT1/4L60E www.classicplace.com

01-01-2003, 11:53 PM	#6
BIG ORANGE Senior Member Join Date: Oct 2001 Location: Lancaster S.C. Posts: 4,745	The more color's you have in powdercoating the more cost. I had 3 different color's with PROJECT ORANGE the springs are orange and the spindels are silver,all Ubolts are silver also. Ever time they change pigment it cost so ask for a detailed quote up front before leaving your stuff. I paid 550.00 to get everthing powdercoated and 200 for sandblasting even sandblasted afew things myself, if you need some powdercoating done let me know the company is in RockHill S.C. ,hope this helps! __________________ Things happen for a reason!

01-01-2003, 10:25 PM	#3
jmanz69 Careful, they attack... Join Date: Aug 2001 Location: Waterford, MI, USA Posts: 1,107	I had two different places quote me $210 for my frame and suspension parts. Didn't get a quote on powdercoating since I can't find anyone locally that has an oven big enought for a truck frame. But I haven't been looking very hard either.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.