The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 04-17-2008, 05:18 AM   #1
jrdz2120
Registered User
 
Join Date: Apr 2008
Location: dallas,tx
Posts: 46
Need help with my new 72 long bed

I just got a 72 the other day. I ran it about a year and a half ago in my 2000 silverado 5.3 and was neck and neck. My problem is I picked it up cheap running bad. From what I can tell it has a 350, long tube headers, edelbrock performer intake and 750 carb, hei and 700r4. It idles smooth and revs smooth in park, but when in gear it struggles and misses. So far I have installed fresh plugs, wires ,cap, rotor,coil, and fuel filter. What I have found wrong is header collector leak, 12v wire from battery to alt. is melted and ignition switch if jiggled cuts out sometimes and not sure if carb is bad or was swapped out. any help or input will be great. Thanks.
jrdz2120 is offline   Reply With Quote
Old 04-17-2008, 07:35 AM   #2
streetstar
Registered User
 
streetstar's Avatar
 
Join Date: May 2007
Location: Moore, Oklahoma
Posts: 2,396
Re: Need help with my new 72 long bed

welcome to the board ! post a pic when you can

Thats a tough predicament -- it can just feel like you're throwing money at it after awhile

Hopefully someone will chime in
but in the meantime ---- ttt
__________________
Are you retired too?

Nonsense! I'm in my prime
streetstar is offline   Reply With Quote
Old 04-17-2008, 07:41 AM   #3
chevychase
Registered User
 
chevychase's Avatar
 
Join Date: Jun 2007
Location: Boca Raton, FL
Posts: 476
Re: Need help with my new 72 long bed

Have you checked the timing?
__________________
Joe
chevychase is offline   Reply With Quote
Old 04-17-2008, 03:05 PM   #4
matthufham
Registered User
 
Join Date: Feb 2005
Location: Carl Junction, Missouri
Posts: 2,061
Re: Need help with my new 72 long bed

how's the choke?
matthufham is offline   Reply With Quote
Old 04-17-2008, 04:02 PM   #5
jrdz2120
Registered User
 
Join Date: Apr 2008
Location: dallas,tx
Posts: 46
Re: Need help with my new 72 long bed

It has a manual choke that is not connected and I will check the timming, but not sure of where it is sipposed to be at.
jrdz2120 is offline   Reply With Quote
Old 04-20-2008, 01:55 AM   #6
jrdz2120
Registered User
 
Join Date: Apr 2008
Location: dallas,tx
Posts: 46
Re: Need help with my new 72 long bed

Ok, so I have changed plugs, wires, cap, rotor coil,fuel pump,and fuel filter.
I checked the timming and it was at 12btc@600 rpm. I set it at 4btc @ 600 rpm and It just started banging out worse. I also re-wired power leads from battery and fuse box to dist. soldered connections and changed ignition switch. All that is left is carb and dist. itself. Any input please? Thanks.
jrdz2120 is offline   Reply With Quote
Old 04-20-2008, 04:40 AM   #7
49m
Registered User
 
49m's Avatar
 
Join Date: Aug 2007
Location: Turners Station,Ky
Posts: 842
Re: Need help with my new 72 long bed

My camaro did that and it had a cracked head.
__________________
My Rides

1969 Mustang gt coupe
1971 Chevy Cheyenne
1986 Iroc camaro
1986 K10 Short Bed
1987 Iroc Camaro
1990 rs Camaro
1992 350 ss truck
1998 Honda Civic
2005 Ram 2500 Cummins

My Build Thread
http://67-72chevytrucks.com/vboard/s...d.php?t=279831
49m is offline   Reply With Quote
Old 04-20-2008, 05:22 AM   #8
jrdz2120
Registered User
 
Join Date: Apr 2008
Location: dallas,tx
Posts: 46
Re: Need help with my new 72 long bed

Do you think so? There is no smoke, overheating , waterleaks and the oil is clean. Thanks.
jrdz2120 is offline   Reply With Quote
Old 04-20-2008, 05:23 AM   #9
jhow66
Registered User
 
jhow66's Avatar
 
Join Date: Jun 2002
Location: Knoxville Tenn.
Posts: 3,058
Re: Need help with my new 72 long bed

12*BTDS with hose off and plugged?
__________________
56 Chevy Bel-Air 2dr. HT (purchased new)
71 Chevy Cheyenne SWB PU (502HO)
65 GMC short bed step--work in progress and my gofer
jhow66 is offline   Reply With Quote
Old 04-20-2008, 05:29 AM   #10
jrdz2120
Registered User
 
Join Date: Apr 2008
Location: dallas,tx
Posts: 46
Re: Need help with my new 72 long bed

Do you think so? There is no smoke, overheating , waterleaks and the oil is clean, but it just misses in gear. Thanks.
jrdz2120 is offline   Reply With Quote
Old 04-20-2008, 05:50 AM   #11
jrdz2120
Registered User
 
Join Date: Apr 2008
Location: dallas,tx
Posts: 46
Re: Need help with my new 72 long bed

Yes, it was 12*btds with the advance hose disconnected and plugged, but I set it to 4*btdc and started sputtering worse. It feels like an ignition problem, but everything has been changed except the module and dist and carb. Help.
jrdz2120 is offline   Reply With Quote
Old 04-20-2008, 05:53 AM   #12
tim21391
Registered User
 
tim21391's Avatar
 
Join Date: Jul 2007
Location: Salina, Kansas
Posts: 1,998
Re: Need help with my new 72 long bed

did u say you changed your points?? or is it hei... my truck was up on the highway and i was runnin about 75 or 80 and then all of a sudden i lost power and couldnt go faster then 45 but when i rev in neutral i had all power there..and it missed on takeoff alot too..so i fixed my points and it was fine
__________________
1972 C-10...402/400..flowmaster 40 series
1967 Mustang 347 stroker/C-4
1966 Mustang 289/3-speed
2013 Mustang V6/6speed w/300 ponies
I may be 23, but i sure do knows 67-72s are sexy!
Its not MPG its smiles per gallon!
build started 11/25/08
build thread: http://67-72chevytrucks.com/vboard/s....php?p=2993796
tim21391 is offline   Reply With Quote
Old 04-20-2008, 06:00 AM   #13
jrdz2120
Registered User
 
Join Date: Apr 2008
Location: dallas,tx
Posts: 46
Re: Need help with my new 72 long bed

I'm sorry, I have a HEI in the truck.
jrdz2120 is offline   Reply With Quote
Old 04-20-2008, 06:24 AM   #14
tim21391
Registered User
 
tim21391's Avatar
 
Join Date: Jul 2007
Location: Salina, Kansas
Posts: 1,998
Re: Need help with my new 72 long bed

ok my mistake im sorry
__________________
1972 C-10...402/400..flowmaster 40 series
1967 Mustang 347 stroker/C-4
1966 Mustang 289/3-speed
2013 Mustang V6/6speed w/300 ponies
I may be 23, but i sure do knows 67-72s are sexy!
Its not MPG its smiles per gallon!
build started 11/25/08
build thread: http://67-72chevytrucks.com/vboard/s....php?p=2993796
tim21391 is offline   Reply With Quote
Old 04-20-2008, 06:48 AM   #15
69long"n"low
Registered User
 
69long"n"low's Avatar
 
Join Date: Jan 2008
Location: SURREY BC, CANADA
Posts: 278
Re: Need help with my new 72 long bed

i was having problems like that before to check yor sparkplugs set timing to 8 degrees and make sure that choke is open all the way if your not using it oh ya and make sure that none of the sparkplug wires are touching anything metal
69long"n"low is offline   Reply With Quote
Old 04-20-2008, 07:35 AM   #16
jhow66
Registered User
 
jhow66's Avatar
 
Join Date: Jun 2002
Location: Knoxville Tenn.
Posts: 3,058
Re: Need help with my new 72 long bed

5 & 7 crossed? Broke plug (outside)?
__________________
56 Chevy Bel-Air 2dr. HT (purchased new)
71 Chevy Cheyenne SWB PU (502HO)
65 GMC short bed step--work in progress and my gofer
jhow66 is offline   Reply With Quote
Old 04-22-2008, 01:50 AM   #17
jrdz2120
Registered User
 
Join Date: Apr 2008
Location: dallas,tx
Posts: 46
Re: Need help with my new 72 long bed

Well, I got the truck running today and I still have problems. I changed the dist. out and the number 7 plug was cracked. I set the timming at 8 deg.,idle at 600 and test drove it and It ran like a bat out of hell for about 15 minutes now It feels weak , but doesn't bangout any more. The header gasket at the number 4/6 exhaust ports blew out. Could that cause the problem? HELP PLEASE. Thanks.
jrdz2120 is offline   Reply With Quote
Old 04-22-2008, 02:00 AM   #18
jhow66
Registered User
 
jhow66's Avatar
 
Join Date: Jun 2002
Location: Knoxville Tenn.
Posts: 3,058
Re: Need help with my new 72 long bed

No. Dist. moved? (loose)
__________________
56 Chevy Bel-Air 2dr. HT (purchased new)
71 Chevy Cheyenne SWB PU (502HO)
65 GMC short bed step--work in progress and my gofer
jhow66 is offline   Reply With Quote
Old 04-22-2008, 02:48 AM   #19
jrdz2120
Registered User
 
Join Date: Apr 2008
Location: dallas,tx
Posts: 46
Re: Need help with my new 72 long bed

I checked the timming and it is still@8deg. btc. Do you think all that heat dumping on the #6/4 plugs could cause it to run weak?
jrdz2120 is offline   Reply With Quote
Old 04-22-2008, 06:29 AM   #20
jhow66
Registered User
 
jhow66's Avatar
 
Join Date: Jun 2002
Location: Knoxville Tenn.
Posts: 3,058
Re: Need help with my new 72 long bed

Quote:
Originally Posted by jrdz2120 View Post
I checked the timming and it is still@8deg. btc. Do you think all that heat dumping on the #6/4 plugs could cause it to run weak?
Decribe "weak".
__________________
56 Chevy Bel-Air 2dr. HT (purchased new)
71 Chevy Cheyenne SWB PU (502HO)
65 GMC short bed step--work in progress and my gofer
jhow66 is offline   Reply With Quote
Old 04-22-2008, 06:38 PM   #21
jrdz2120
Registered User
 
Join Date: Apr 2008
Location: dallas,tx
Posts: 46
Re: Need help with my new 72 long bed

The truck went from tire smoking instant throttle to running, but not strong as mentioned before in a span of 15/20 minutes.
jrdz2120 is offline   Reply With Quote
Old 04-22-2008, 08:19 PM   #22
jhow66
Registered User
 
jhow66's Avatar
 
Join Date: Jun 2002
Location: Knoxville Tenn.
Posts: 3,058
Re: Need help with my new 72 long bed

Check gas filter-try it with gas cap off (vacuum in tank)
__________________
56 Chevy Bel-Air 2dr. HT (purchased new)
71 Chevy Cheyenne SWB PU (502HO)
65 GMC short bed step--work in progress and my gofer
jhow66 is offline   Reply With Quote
Old 04-22-2008, 08:53 PM   #23
jrdz2120
Registered User
 
Join Date: Apr 2008
Location: dallas,tx
Posts: 46
Re: Need help with my new 72 long bed

I'll give that a try .I'll also change the gasket at the header and give it another once over.Thanks,
jrdz2120 is offline   Reply With Quote
Old 04-23-2008, 03:59 PM   #24
jrdz2120
Registered User
 
Join Date: Apr 2008
Location: dallas,tx
Posts: 46
Re: Need help with my new 72 long bed

Had a fouled plug #8. Rund ok ,but now kind of boggs from dead stop launch.
Maybe cap/ rotor fouled?
jrdz2120 is offline   Reply With Quote
Old 04-23-2008, 07:10 PM   #25
jhow66
Registered User
 
jhow66's Avatar
 
Join Date: Jun 2002
Location: Knoxville Tenn.
Posts: 3,058
Re: Need help with my new 72 long bed

You need to take it to a buddy that knows carbs. Sounds like a carb adjustment problem. Cap and rotor don,t just "foul".
__________________
56 Chevy Bel-Air 2dr. HT (purchased new)
71 Chevy Cheyenne SWB PU (502HO)
65 GMC short bed step--work in progress and my gofer
jhow66 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:34 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com