Power Brake Booster Adapter Bracket - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Chuck78 · 05-03-2009, 10:14 AM

nice looking job as always! Now if you could find a 60-62 w/manual trans, and start making some booster brackets that space the booster far enough off the firewall and with the necessary notch to fit in a Wilwood or similar 1-1/8" bore master for use as clutch master!

**Captainfab** · 05-03-2009, 11:06 PM

Quote:

Originally Posted by Chuck78

nice looking job as always! Now if you could find a 60-62 w/manual trans, and start making some booster brackets that space the booster far enough off the firewall and with the necessary notch to fit in a Wilwood or similar 1-1/8" bore master for use as clutch master!

Do you think there would be a few members that would want a setup like that?

05-03-2009, 10:14 AM	#1
Chuck78 Registered User Join Date: Apr 2005 Location: Columbus, OH Posts: 197	Re: Power Brake Booster Adapter Bracket nice looking job as always! Now if you could find a 60-62 w/manual trans, and start making some booster brackets that space the booster far enough off the firewall and with the necessary notch to fit in a Wilwood or similar 1-1/8" bore master for use as clutch master! __________________ Chuck in Ohio 1962 GMC 1000 Panel Truck - 305D/Saginaw 4sp soon: 351C V6 + AX15 5sp OD trans, & 75-87/91 disc brake front end* 1988 Suzuki Samurai 4x4 project, VW 1.9L mTDI, Toyota R151F transmission & Toyota full floater axles, LWB body tub stretch project* *Many 1977-1979 Suzuki GS motorcycles, Kawasaki KDX220R, '77 Suzuki PE250, etc



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.