The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1947 - 1959 Chevrolet & GMC Pickups Message Board > Projects and Builds

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 11-17-2009, 08:18 PM   #151
CAL 58 GMC
Senior Member
 
CAL 58 GMC's Avatar
 
Join Date: Jun 2005
Location: Clovis Ca.
Posts: 3,311
Re: My 57 Pro Street

Quote:
Originally Posted by OrrieG View Post
I posted about that in my build thread. I could not figure out how every 55-59 I saw with the fenders off was beat in that area. My fenders had never been off and one side was hammered a little the other quite a bit. I read somewhere that the inside stamping was drawn and tooled wrong, someone had not taken into consideration interference with the fender brace (or it may have been beefed up during design). Rather than retool they just issued the fender install guys on the line a 2# adjustment tool. So if yours is beat, don't work to hard making it pretty because you will probably just get to pound down your new paint again. Look close at my cab photos and you will see the dents still there on mine.
Now that you mention it mine had those same dents, I just thought it must have be from an accident at some point in it's life. Sorry Kim for jumping in on your thread!

Last edited by CAL 58 GMC; 11-17-2009 at 08:19 PM.
CAL 58 GMC is offline   Reply With Quote
Old 11-21-2009, 12:09 AM   #152
Kim57
Registered User
 
Kim57's Avatar
 
Join Date: Aug 2007
Location: Corona, California
Posts: 7,998
Re: My 57 Pro Street

Quote:
Originally Posted by CAL 58 GMC View Post
Now that you mention it mine had those same dents, I just thought it must have be from an accident at some point in it's life. Sorry Kim for jumping in on your thread!
It's OK. The info is welcome.
Kim
Kim57 is offline   Reply With Quote
Old 11-22-2009, 01:35 PM   #153
chevyrestoguy
Registered User
 
chevyrestoguy's Avatar
 
Join Date: Mar 2005
Location: apple valley, ca
Posts: 2,670
Re: My 57 Pro Street

Kim-
I'm going throught the same thing right now with aligning my doors. I thought my situation was unique. I had considered cutting my cage nuts loose on my upperhinges and relocating them more outboard so the top of the door could move outward and get the door's front edge and cowl more aligned. But, that would cause issues on everything forward of that gap. The fenders and the hood wouldn't line up, and you'd wind up having to add metal at all of your gaps in order to close them up. I'm an probably going to align the doors as best as possible, and then do bodywork to make everything look right. I did a shop tour at Boyd's years ago when he was in the old shop, and they were working on Cadzilla for Billy Gibbons of ZZ Top. They got the doors as best they could by aligning and then closing up the gaps with sheet metal and welding rods, then they did a 36" sweep of filler from top to bottom at all of the door gaps and blocked the area until the gaps were consistent and the panel intersections were flat and even. I'm a stickler about panel gaps, and that amount of work that they did gave me a real appreciation of what it takes to make it look right.
chevyrestoguy is offline   Reply With Quote
Old 11-22-2009, 09:17 PM   #154
Kim57
Registered User
 
Kim57's Avatar
 
Join Date: Aug 2007
Location: Corona, California
Posts: 7,998
Re: My 57 Pro Street

Quote:
Originally Posted by chevyrestoguy View Post
Kim-
I'm going throught the same thing right now with aligning my doors. I thought my situation was unique. I had considered cutting my cage nuts loose on my upperhinges and relocating them more outboard so the top of the door could move outward and get the door's front edge and cowl more aligned. But, that would cause issues on everything forward of that gap. The fenders and the hood wouldn't line up, and you'd wind up having to add metal at all of your gaps in order to close them up. I'm an probably going to align the doors as best as possible, and then do bodywork to make everything look right. I did a shop tour at Boyd's years ago when he was in the old shop, and they were working on Cadzilla for Billy Gibbons of ZZ Top. They got the doors as best they could by aligning and then closing up the gaps with sheet metal and welding rods, then they did a 36" sweep of filler from top to bottom at all of the door gaps and blocked the area until the gaps were consistent and the panel intersections were flat and even. I'm a stickler about panel gaps, and that amount of work that they did gave me a real appreciation of what it takes to make it look right.
I was talking to a body guy that took over one of the buildings that Boyd was in after he died (he's doing my brothers truck). He told me that these old vehicles are like that. Some things fit nice and some are way off. My passenger side is way better than the driver side. I took some measurements this weekend and it looks like the cowl was installed almost a 1/4" low on the driver side. I'm thinking about cutting it where it is supposed to line up with the fender and raising it. It's either that or lots of body filler in that area which is what was there when I bought it. The driver door is also wider at the top than the passenger opening. I guess the guy on that side was having a bad day.
Kim
Kim57 is offline   Reply With Quote
Old 11-24-2009, 03:10 PM   #155
Fat Mike
Registered User
 
Fat Mike's Avatar
 
Join Date: Sep 2009
Location: Albuquerque, NM
Posts: 540
Re: My 57 Pro Street

Can you show a picture of the graft of your subframe up close and the rear part of your cab. It looks like you shaved it. My rear cab is alittle beat up and I like the idea.
Fat Mike is offline   Reply With Quote
Old 11-25-2009, 01:41 AM   #156
Kim57
Registered User
 
Kim57's Avatar
 
Join Date: Aug 2007
Location: Corona, California
Posts: 7,998
Re: My 57 Pro Street

Quote:
Originally Posted by Fat Mike View Post
Can you show a picture of the graft of your subframe up close and the rear part of your cab. It looks like you shaved it. My rear cab is alittle beat up and I like the idea.
Hope these help. If you need any more just ask.
I used 16 gauge on the back of the cab.
Kim
Attached Images
   
Kim57 is offline   Reply With Quote
Old 11-25-2009, 06:26 PM   #157
OrrieG
Registered User
 
OrrieG's Avatar
 
Join Date: Jun 2006
Location: Idaho
Posts: 8,800
Re: My 57 Pro Street

Quote:
Originally Posted by Kim57 View Post
I guess the guy on that side was having a bad day.
Kim
Monday morning assembly vehicle...
__________________
1959 Chevy Short Fleetside w/ 74 4WD drive train (current project) OrrieG Build Thread
1964 Chevelle Malibu w/ 355-350TH (daily driver)
Helpful AD and TF Manual Site Old Car Manual Project
OrrieG is offline   Reply With Quote
Old 01-03-2010, 03:25 PM   #158
1Bad62Pro/Street
"Where were you in '62?"
 
1Bad62Pro/Street's Avatar
 
Join Date: Jul 2004
Location: Cleveland County, North Cackalacky
Posts: 5,013
Thumbs up Re: My 57 Pro Street

Here is a little inspiration for your 57 Kim!
Yep... I finally found a video clip of the Beast.


1956 Chevy Truck - Double-Stacked Lightnin'
http://sporttruck.automotive.com/920...uck/index.html
__________________
PROJECT: "FULL METAL YELLOW JACKET"
1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck
PROJECT: "FULL METAL YELLOW JACKET Build Thread
What Are You Workin' On? - 1Bad62ChevyPickup
PROJECT: "TYRANNORAMBLER REX"
1969 AMC Rambler American Nostalgia Pro/Street
Youtube Channel: Father Son Projects
Youtube Channel: 2TIMOTHY2FITHTEEN

"North and South Carolina Folks Click Here!"
(((( ~ I have Parts For Sale & Miscellaneous Stuff ~ ))))

"Well being as there's no other place around the place,
I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D.
1Bad62Pro/Street is offline   Reply With Quote
Old 01-03-2010, 04:28 PM   #159
FRENCHBLUE72
PROJECT 7DEUCE
 
FRENCHBLUE72's Avatar
 
Join Date: Dec 2002
Location: GRANTS PASS OR
Posts: 21,608
Re: My 57 Pro Street

I have seen this truck at the portland roadster show and it is awesome for sure..
__________________
GO BIG GREEN GO DUCKS



MEMBER #6377

72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free.

Project "7DEUCE"

check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665



Tim Powell..R.I.P EastSideLowlife..... R.I.P..
FRENCHBLUE72 is offline   Reply With Quote
Old 01-03-2010, 06:59 PM   #160
Kim57
Registered User
 
Kim57's Avatar
 
Join Date: Aug 2007
Location: Corona, California
Posts: 7,998
Re: My 57 Pro Street

That's a very cool truck.
Kim
Kim57 is offline   Reply With Quote
Old 01-21-2010, 04:31 PM   #161
Kim57
Registered User
 
Kim57's Avatar
 
Join Date: Aug 2007
Location: Corona, California
Posts: 7,998
Re: My 57 Pro Street

Made a little progress on getting the brackets for the brakes mounted.
The pics are pretty self explanatory.
I cut the original mount for the pedal off.
I'm using 3/4"x1/2" DOM going through the frame to mount them.
I still have to weld everything in but it's raining and I don't like to weld with bad weather.
Kim
Attached Images
     
Kim57 is offline   Reply With Quote
Old 01-21-2010, 04:34 PM   #162
Kim57
Registered User
 
Kim57's Avatar
 
Join Date: Aug 2007
Location: Corona, California
Posts: 7,998
Re: My 57 Pro Street

Here are a few more pics.
Sorry the last one is a bit blurry. You can see the access hole I had to cut in the cab mount to be adle to get the bolt in.
Kim
Attached Images
   
Kim57 is offline   Reply With Quote
Old 01-21-2010, 04:47 PM   #163
Tri5Nerd
Tripple Five Fanatic
 
Tri5Nerd's Avatar
 
Join Date: Sep 2006
Location: USA
Posts: 658
Re: My 57 Pro Street

Good job Kim, keep us posted with your progress.

Tri5
__________________
1955 Chevy Stepside/LS1 drive train
http://67-72chevytrucks.com/vboard/s...d.php?t=371513
Tri5Nerd is offline   Reply With Quote
Old 01-21-2010, 05:43 PM   #164
Fat Mike
Registered User
 
Fat Mike's Avatar
 
Join Date: Sep 2009
Location: Albuquerque, NM
Posts: 540
Re: My 57 Pro Street

Thank you for posting these pictures! You have convinced me to purchase 78 chevy truck with a 350 combo and hydobrake set up on it. Really nice build.
Fat Mike is offline   Reply With Quote
Old 01-21-2010, 06:45 PM   #165
nickp51chevy
Registered Chevy Owner
 
nickp51chevy's Avatar
 
Join Date: Aug 2008
Location: Snohomish, wa
Posts: 1,557
Re: My 57 Pro Street

'78???
__________________
Love is fleeting, but Chevy trucks are forever!!!!

1970 Chevy CST C10 long box 350/400
2008 Chevy Silverado short box 4x4

Had;
1951 Chevy short box 307/T5
1988 Chevy shot box 4x4 350/350
1971 Chevy C10 long box 4x4 350/350
1971 Chevy C20 long box 350/350
1971 Chevy C10 long box 350/350
nickp51chevy is offline   Reply With Quote
Old 01-21-2010, 08:15 PM   #166
CAL 58 GMC
Senior Member
 
CAL 58 GMC's Avatar
 
Join Date: Jun 2005
Location: Clovis Ca.
Posts: 3,311
Re: My 57 Pro Street

Nice job Kim!
CAL 58 GMC is offline   Reply With Quote
Old 01-22-2010, 01:09 AM   #167
Kim57
Registered User
 
Kim57's Avatar
 
Join Date: Aug 2007
Location: Corona, California
Posts: 7,998
Re: My 57 Pro Street

Thanks for the compliments guys.
Kim


Quote:
Originally Posted by nickp51chevy View Post
'78???
I believe he is using as a doner truck for the running gear and brakes.
It has a hydroboost system on it.
Kim
Kim57 is offline   Reply With Quote
Old 01-22-2010, 02:08 AM   #168
addicted2dunes
Insane In The Membrane
 
addicted2dunes's Avatar
 
Join Date: Jan 2010
Location: Orcutt, CA
Posts: 446
Re: My 57 Pro Street

Quote:
Originally Posted by Kim57 View Post
I still have to weld everything in but it's raining and I don't like to weld with bad weather.
Kim
Hey Kim, yeah, isn't the weather here just wonderful. I've been having the same problem..... I do all my plasma-ing outside and every time I get ready to cut something it starts pouring! Damn the weather, at least it should clear up for weekend!

Last edited by addicted2dunes; 01-22-2010 at 02:09 AM.
addicted2dunes is offline   Reply With Quote
Old 01-22-2010, 11:45 AM   #169
Kabwe
Certified Car Nut
 
Kabwe's Avatar
 
Join Date: Jan 2005
Location: Inglewood, California
Posts: 3,118
Re: My 57 Pro Street

Great job Kim.
Kabwe is offline   Reply With Quote
Old 01-24-2010, 12:45 AM   #170
nuke1
Registered User
 
nuke1's Avatar
 
Join Date: Jun 2007
Location: Saskatoon, Saskatchewan,:
Posts: 2,901
Re: My 57 Pro Street

looks great!
__________________
James
1968 GMC "HAVOC"
1986 GMC "Frank"
J.J.R.H. Design & Consulting

My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300
A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238
1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361
Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390
Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100
1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587
nuke1 is offline   Reply With Quote
Old 01-24-2010, 04:29 PM   #171
my67chevytruck
Under Construction
 
my67chevytruck's Avatar
 
Join Date: Oct 2007
Location: Midlothian,TX (DFW)
Posts: 4,555
Re: My 57 Pro Street

great progress Kim, keep at it...
__________________
Heath

subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php

http://67-72chevytrucks.com/vboard/s...d.php?t=157669
FAQ how to's


1956 Chevy Apache
1967 C10 SWB FleetSide (under construction)
1969 K10 SWB FleetSide (Future Build)
1972 C10 SWB Stepside (Future Build)


56 chevy truck :
http://www.cardomain.com/ride/2955823/1

67 truck build:

http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1


69 k10:
http://67-72chevytrucks.com/vboard/s...d.php?t=389470
my67chevytruck is offline   Reply With Quote
Old 01-26-2010, 05:04 PM   #172
Kim57
Registered User
 
Kim57's Avatar
 
Join Date: Aug 2007
Location: Corona, California
Posts: 7,998
Re: My 57 Pro Street

Got a little more done on the brakes.
Welded the DOM in and mounted the power booster to see how it fit.
I still have to figure out the length of the tube that will conect the pedal to the booster.
Kim
Attached Images
     
Kim57 is offline   Reply With Quote
Old 01-26-2010, 05:51 PM   #173
jjjmm56
Registered User
 
jjjmm56's Avatar
 
Join Date: Jan 2009
Location: kissimmee Florida
Posts: 494
Re: My 57 Pro Street

Can I ask why you mounted your booster back so far, and is that a power brake booster or just a master cyl?
jjjmm56 is offline   Reply With Quote
Old 01-26-2010, 07:27 PM   #174
Kim57
Registered User
 
Kim57's Avatar
 
Join Date: Aug 2007
Location: Corona, California
Posts: 7,998
Re: My 57 Pro Street

Quote:
Originally Posted by jjjmm56 View Post
Can I ask why you mounted your booster back so far, and is that a power brake booster or just a master cyl?
It's a hydroboost unit.
I mounted it there for ease of maintenance. It sits just in back of where the cab ends. My bed is going to tilt so it will be easy to get to.
Kim
Kim57 is offline   Reply With Quote
Old 01-26-2010, 09:27 PM   #175
nickp51chevy
Registered Chevy Owner
 
nickp51chevy's Avatar
 
Join Date: Aug 2008
Location: Snohomish, wa
Posts: 1,557
Re: My 57 Pro Street

Kim that'a a sweet set up your doing for your brakes, and the tilt bed; awesome!
__________________
Love is fleeting, but Chevy trucks are forever!!!!

1970 Chevy CST C10 long box 350/400
2008 Chevy Silverado short box 4x4

Had;
1951 Chevy short box 307/T5
1988 Chevy shot box 4x4 350/350
1971 Chevy C10 long box 4x4 350/350
1971 Chevy C20 long box 350/350
1971 Chevy C10 long box 350/350
nickp51chevy is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:51 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com