Boss 338 Wheels **GROUP BUY**

[SCOTI]

Originally Posted by Strut

Leviticus, I have tubed my bed 1 3/4 towards the center of the bed. Do you think that I would have enought room to run them on a 72? With no spacer....

If you mini-tubbed 1.75" & are running a 72 length housing, the 'math' says you should be good. I had 1.75" mini-tubs w/20x10" wheels (5.50" back spacing) using the shorter pre-70 housing & they fit. You're adding .750 each side on housing length & offsetting it w/similar additional back space for the wheels.

[Strut]

Originally Posted by SCOTI

If you mini-tubbed 1.75" & are running a 72 length housing, the 'math' says you should be good. I had 1.75" mini-tubs w/20x10" wheels (5.50" back spacing) using the shorter pre-70 housing & they fit. You're adding .750 each side on housing length & offsetting it w/similar additional back space for the wheels.

Yeah its a 72 rear.... What size are your tires on the rear?

[SCOTI]

Originally Posted by Strut

Yeah its a 72 rear.... What size are your tires on the rear?

They were 295-40-20's.

[Security guy]

So for my sake and everyone else watching this, the new design will fit the front? The rear will fit also on our trucks but will require a spacer depending on what year rear you have? Any mention of a group buy on spacers from the same guy that is ordering the wheels? Just thought I'd check. Thanks for all the info also.

[Strut]

Originally Posted by SCOTI

They were 295-40-20's.

You think that you could have run a bigger tire? Say a 315/35/20??