My Crewcab Shortbed - Page 12 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Walts_restoration · 11-03-2010, 01:55 PM

h1 wheels are cheap, get them just about anywhere. Their tires are cheap too.

D44 and 10 bolt are the same strength, as far as the later design 77-82 at the latest are concereded 44's. You can either get or put an 8 lug outer just as easily on the 10 bolt and 44, and in most cases they swap from knuckle out anyways.

d60s gonna cost ya a arm and a leg, military truck pairs would be the way i go. 4.56 gear, fronts on the m1028a's and some others had limited slip, with the 4.56 gear 14 bolt with detriot in the back, only downfall is its a single rear wheel setup.

*Stitch* · 11-03-2010, 08:15 PM

I don't care about the strength of the axle right now. Hell the front axle won't even have a driveshaft hooked to it until I can get 4x4 th400 and transfercase lol. I just need it to be 8 lug that's all for right now. I eventually want a d60 with h1 wheels and h1 36s. But for now I'm fine with just getting a front axle under it so I can get it on the road.
Posted via Mobile Device

palposity · 11-03-2010, 08:58 PM

Quote:

Originally Posted by Stitch

When I get off work tonight I could tell you exactly how I'm gonna turn every wrench and weld every weld. Lol
Posted via Mobile Device

Good, and don't forget the vid! I love to watch vids of people turning bolts. Or better yet, how about a vid of you typing your posts? That would be awesome! Or how about a vid of Chester loading candy in the van?

menace121978 · 11-03-2010, 09:07 PM

*Stitch* · 11-03-2010, 11:52 PM

Yeehaw I found me a d60 and d70 from a dually. Now I just gotta come up with some money. Someone needs to buy my damn Coys.
Posted via Mobile Device

STOCKISH · 11-04-2010, 10:26 PM

Coys for sale again? Man, you change your mind more than I do! LOL!!!

STOCKISH · 11-04-2010, 10:30 PM

Quote:

Originally Posted by Stitch

Finding a d44 or d60 right now for a good price is killing me. I found some 10 bolt front and rear axles, but I don't know if I wanna buy them just yet because I could use that money towards a dana.

And I know about the drw axles working for the h1 wheels but I'm having a hard enough time finding anything at all lol.
Posted via Mobile Device

I tried to sell you a Dana 60 dually front for $500 bucks cracka! I agree with your previous post, Put a 8 lug dana44 HD under it and drive it. You wont need a 60 unless you're off roading it. There was a 8 lug 44HD on NC4x4.com yesterday with 4.10 gears for $200.00 just FYI

cochino12 · 11-04-2010, 10:32 PM

Quote:

Originally Posted by Stitch

Yeehaw I found me a d60 and d70 from a dually. Now I just gotta come up with some money. Someone needs to buy my damn Coys.
Posted via Mobile Device

Why not save a ton of money and just dana 44?

*Stitch* · 11-04-2010, 10:43 PM

I didnt know it was there. I'm gonna go check it out right now. Thanks guys.
Posted via Mobile Device

*Stitch* · 11-04-2010, 11:02 PM

Alright I must be blind because I can't find it for nothing lol
Posted via Mobile Device

*Stitch* · 12-23-2010, 12:58 AM

Well, 'the Whore' has decided to shack up in a new (old) bed again lol...

I won't be inviting her back this time...got bigger plans in mind...

have fun Josh, hope the cummins doesn't give you too many problems...maybe you can keep hold to this project for a while...

*87 chevy silverado* · 12-23-2010, 03:55 PM

o darn i wanted it

STOCKISH · 12-23-2010, 04:40 PM

Hey man, why are you telling everyone about my Cummins! It's supposed to be a secret!

I guess it's out now. Now that the garage is cleared out and I have gathered a few parts I will be gladly building my dream Daily Driver truck.

87 Silverado, Crew Cab Short Bed, 1 Ton, 4X4, Dana 60 Front, 14 Bolt Rear,
Cummins Turbo Diesel, A518 Trans, NP205 Transfer Case, ETC, ETC....

But hey it's still a secret, dont tell everybody!

*87 chevy silverado* · 12-23-2010, 08:27 PM

Quote:

Originally Posted by 1972SuperCheyenne

Hey man, why are you telling everyone about my Cummins! It's supposed to be a secret!

I guess it's out now. Now that the garage is cleared out and I have gathered a few parts I will be gladly building my dream Daily Driver truck.

87 Silverado, Crew Cab Short Bed, 1 Ton, 4X4, Dana 60 Front, 14 Bolt Rear,
Cummins Turbo Diesel, A518 Trans, NP205 Transfer Case, ETC, ETC....

But hey it's still a secret, dont tell everybody!

u got ride of the 72?

STOCKISH · 12-23-2010, 10:25 PM

Yep, it's gone. Need to build my dream daily driver so I can get rid of my truck payment.

JohnC · 12-24-2010, 12:28 PM

Man and I thought I changed my mind a lot.

*Stitch* · 12-24-2010, 01:04 PM

Posted via Mobile Device

*87 chevy silverado* · 12-24-2010, 07:04 PM

Quote:

Originally Posted by Stitch

Posted via Mobile Device

mcbassin · 12-24-2010, 07:13 PM

Seriously? I thought you just scored a sweet rust free cab for that project?
sorry Stitch not wanting to hijack, I'm confused as all get out?

STOCKISH · 12-24-2010, 11:56 PM

Turns out a 38 hour road trip in January to Missouri and back is not a good idea!

I need to build my daily driver first so I can get rid of my truck payment. It is putting me in a situation I am not happy with. Then I am going to buy a rust free complete truck from out west, fly in, and drive it home! Maybe in the spring or fall though!

bluex · 12-25-2010, 07:07 AM

Quote:

Originally Posted by bluex

meh.....

I give it two months and it will be back up for sale, or on its way back to josh's house!

I only know b/c I change my mind so much too.......

Quote:

Originally Posted by 1972SuperCheyenne

Nope! Not to my house. The next CCSB I buy will already be put together! I work on cars all day for a living. Sometimes you just want to get in one and hit the key ya know!

Quote:

Originally Posted by 1972SuperCheyenne

Hey man, why are you telling everyone about my Cummins! It's supposed to be a secret!

I guess it's out now. Now that the garage is cleared out and I have gathered a few parts I will be gladly building my dream Daily Driver truck.

87 Silverado, Crew Cab Short Bed, 1 Ton, 4X4, Dana 60 Front, 14 Bolt Rear,
Cummins Turbo Diesel, A518 Trans, NP205 Transfer Case, ETC, ETC....

But hey it's still a secret, dont tell everybody!

So what do I win??????

Depending on when you picked it up I only missed this by days!!!!

*Stitch* · 12-25-2010, 01:53 PM

Quote:

Originally Posted by bluex

So what do I win??????

Depending on when you picked it up I only missed this by days!!!!

you win nothing...lol...you're two months ended on the 19th...the truck won't be delivered until Jan 2...

GmtGmt · 12-25-2010, 01:59 PM

so any updates buddy?

VA72C10 · 12-25-2010, 09:48 PM

you....are.....certifiable

STOCKISH · 12-26-2010, 12:08 AM

Addicted and crazy!

11-03-2010, 01:55 PM	#276
Walts_restoration Real Projects never die Join Date: Jan 2007 Location: Lawrence, kansas Posts: 1,508	Re: My Crewcab Shortbed h1 wheels are cheap, get them just about anywhere. Their tires are cheap too. D44 and 10 bolt are the same strength, as far as the later design 77-82 at the latest are concereded 44's. You can either get or put an 8 lug outer just as easily on the 10 bolt and 44, and in most cases they swap from knuckle out anyways. d60s gonna cost ya a arm and a leg, military truck pairs would be the way i go. 4.56 gear, fronts on the m1028a's and some others had limited slip, with the 4.56 gear 14 bolt with detriot in the back, only downfall is its a single rear wheel setup. __________________ Ill put it this way, ive got a few lawn ornaments My name tag says Ryan KansasTwister On other forums

11-03-2010, 08:15 PM	#277
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: My Crewcab Shortbed I don't care about the strength of the axle right now. Hell the front axle won't even have a driveshaft hooked to it until I can get 4x4 th400 and transfercase lol. I just need it to be 8 lug that's all for right now. I eventually want a d60 with h1 wheels and h1 36s. But for now I'm fine with just getting a front axle under it so I can get it on the road. Posted via Mobile Device

11-03-2010, 09:07 PM	#279
menace121978 Registered User Join Date: Jan 2009 Location: orangevale, ca Posts: 3,626	Re: My Crewcab Shortbed __________________ "Dennis the Menace" 1978 Silverado (2wd, 1/2 ton, short bed)complete nut & bolt frame off restomod LQ9/4L80E MY LS SWAP/FRAME OFF BUILD BOOK 2006 TBSS way too much to list

11-03-2010, 11:52 PM	#280
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: My Crewcab Shortbed Yeehaw I found me a d60 and d70 from a dually. Now I just gotta come up with some money. Someone needs to buy my damn Coys. Posted via Mobile Device

11-04-2010, 10:26 PM	#281
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: My Crewcab Shortbed Coys for sale again? Man, you change your mind more than I do! LOL!!! __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

11-04-2010, 10:43 PM	#284
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: My Crewcab Shortbed I didnt know it was there. I'm gonna go check it out right now. Thanks guys. Posted via Mobile Device

11-04-2010, 11:02 PM	#285
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: My Crewcab Shortbed Alright I must be blind because I can't find it for nothing lol Posted via Mobile Device

12-23-2010, 12:58 AM	#286
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: My Crewcab Shortbed Well, 'the Whore' has decided to shack up in a new (old) bed again lol... I won't be inviting her back this time...got bigger plans in mind... have fun Josh, hope the cummins doesn't give you too many problems...maybe you can keep hold to this project for a while...

12-23-2010, 03:55 PM	#287
87 chevy silverado Account Suspended Join Date: Apr 2009 Location: lexington South Carolina Posts: 2,124	Re: My Crewcab Shortbed o darn i wanted it

12-23-2010, 04:40 PM	#288
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: My Crewcab Shortbed Hey man, why are you telling everyone about my Cummins! It's supposed to be a secret! I guess it's out now. Now that the garage is cleared out and I have gathered a few parts I will be gladly building my dream Daily Driver truck. 87 Silverado, Crew Cab Short Bed, 1 Ton, 4X4, Dana 60 Front, 14 Bolt Rear, Cummins Turbo Diesel, A518 Trans, NP205 Transfer Case, ETC, ETC.... But hey it's still a secret, dont tell everybody! __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

12-23-2010, 10:25 PM	#290
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: My Crewcab Shortbed Yep, it's gone. Need to build my dream daily driver so I can get rid of my truck payment. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

12-24-2010, 12:28 PM	#291
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: My Crewcab Shortbed Man and I thought I changed my mind a lot.

12-24-2010, 01:04 PM	#292
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: My Crewcab Shortbed Posted via Mobile Device

12-24-2010, 07:13 PM	#294
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: My Crewcab Shortbed Seriously? I thought you just scored a sweet rust free cab for that project? sorry Stitch not wanting to hijack, I'm confused as all get out? __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

12-24-2010, 11:56 PM	#295
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: My Crewcab Shortbed Turns out a 38 hour road trip in January to Missouri and back is not a good idea! I need to build my daily driver first so I can get rid of my truck payment. It is putting me in a situation I am not happy with. Then I am going to buy a rust free complete truck from out west, fly in, and drive it home! Maybe in the spring or fall though! __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.



Register or Log In To remove these advertisements.

12-25-2010, 09:48 PM	#299
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: My Crewcab Shortbed you....are.....certifiable __________________ Looking for a 67-72 swb or blazer project in or around VA.

12-26-2010, 12:08 AM	#300
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: My Crewcab Shortbed Addicted and crazy! __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

Register or Log In To remove these advertisements.