One Piece Window Conversion Kit for '67-'72 GM Trucks - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Captkaos** · 12-30-2010, 04:44 PM

Quote:

Originally Posted by rob32472;

Guys be real careful with this kit...... unless these have been changed since Ebfabman installed them on project cod fish there are some real issues that need to be addressed...... 1) you will have to grind the hex out of the latch for clearance.... 2) the window will not roll down all the way with out cutting the stop at door bottom. 3) you will have to cut notches in the scrubbers to clear the window mounts. 4) I dont like the fact the scrubbers glue in..... We spent alot of time to get these "right" love the look but this "kit" is not perfected yet...... I spoke with the guy at the opp and relayed all the info from the install and he was surprised he ask "what was the skill level of the guy installing this kit"? My reply "you have no idea how good he is"

How long ago was this? OPP is on revision 5 of these.

1)Page 33 of the fitment/adjustments. Some doors require this.
2)Was this a power window setup, if so, you have to notch the power setup to add the extra "V", I have never cut the bottom stop. E
3)never had this happen, did you verify that they scrapers are flush to the trim when they were installed?
4)Scrapers with clips are coming out and will eliminate the possibility of #3, in addition the video install will show how customers can add clips to the scrapers.

**Clyde65** · 12-30-2010, 05:01 PM

I guess I'm nobody....

ebfabman · 12-30-2010, 05:10 PM

Why not post some detailed videos addressing any/all issues. This would greatly help sales. All the videos I've seen seemed incomplete and were of doors not even on the truck, and were not very detailed. If there have been improvements please show us. The "kit" Rob got from one piece products was far from making an easy operating window. We followed the instructions exactly and even called the guy who makes them as we were installing them to be sure we were doing everything as he suggest. Again, If there has been improvements, show some videos of operating windows installed on a truck ready for the road. Power windows would be even better.

thanks.....eb

12-30-2010, 05:01 PM	#2
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,540	Re: One Piece Window Conversion Kit for '67-'72 GM Trucks I guess I'm nobody.... __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

12-30-2010, 05:10 PM	#3
ebfabman Registered User Join Date: Nov 2001 Location: Concord, NC Posts: 2,489	Re: One Piece Window Conversion Kit for '67-'72 GM Trucks Why not post some detailed videos addressing any/all issues. This would greatly help sales. All the videos I've seen seemed incomplete and were of doors not even on the truck, and were not very detailed. If there have been improvements please show us. The "kit" Rob got from one piece products was far from making an easy operating window. We followed the instructions exactly and even called the guy who makes them as we were installing them to be sure we were doing everything as he suggest. Again, If there has been improvements, show some videos of operating windows installed on a truck ready for the road. Power windows would be even better. thanks.....eb



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.