Gauge cluster pics

[nibs]

Originally Posted by Alvin

Covan's Classics panel with Stewart Warner Power Series electric gauges and a dakota digital air ride pressure gauge

I really like the placement of the air ride gauge... I wish I had room on mine to put mine there.

[72mike]

Heres what i am putting in my 72.

[franky69c10]

Originally Posted by 72mike

Heres what i am putting in my 72.

Any info on the gauges
Posted via Mobile Device

[mahanian]

Originally Posted by franky69c10

Any info on the gauges
Posted via Mobile Device

That looks like the Classic Instruments Gauge Package, it's sold as a assembled package with the choice of 8 different gauges. Here is a write up in Classic Trucks

http://www.classictrucks.com/tech/10...gmc/index.html

[KevsClassics]

Here's mine.

[mrhino]

Originally Posted by KevsClassics

Here's mine.

Here's mine.
Attached Images


those are sweet, that whole interior is F'in sweet

[mrein3]

For those of you with the need for speed and/or those of you that spend time north of 100mph, the speedo out of a Monte Carlo fits the cluster. You would need to find one out of a straight stick car - the one I mocked up has the pernandel window cut out of the speedo face.

Then just polish off the truck numbers from the back of the plastic face and you're good to go.

1970 - 1972 Chevelle SS and 1970 - 1972 Monte Carlo speedos would work.

[bcdeutsch731]

Stock gauges with homemade switch and gauge plate. Bad pictures but you get the idea.

[70c10]

[dohyde34]

Originally Posted by 70c10

where did you get those?

[70' 396 Stepside]

Just put it back in today...

[big bad orange]

Factory gauges with a motor minder added by the PO

[ED1971C10]

Originally Posted by 70c10

Hi, my name is Eddie, I own a 1971 Chevy C10 and I bought some blue led bulbs for the guage cluster which the previous owner put " Auto Meter Guages" in and they weren't very pricy bulbs so of course they went out and the issue I have with getting new ones is that the company that I bought them from somehow me a different shade of blue and with my first order that same lighter shade two of them were in there so never matched the deep blue in the rest of the gauges, so the question is where did you get those blue lights?

[SOON2BLAZE]

Originally Posted by bcdeutsch731

Stock gauges with homemade switch and gauge plate. Bad pictures but you get the idea.

BRAVO CHARLIE DELTA: Your cleared for take off.

['70_402]

here's mine with the bigger oil pressure in the center...

[ivanuf2]

I just installed these tonight. They look better installed that in the box.

[oldblue1968chevy]

Wheres can I get some of these cool looking led style bulbs? (to fit stock 3 hole bezel)

[gotchamel]

Here is mine with VDO vision series gauges.

[67swb72klb]

here is what the p/o did to the face on my 72 k10 then he quit on the rest of the project lucky for me

[landsurvey1]

subscribed

[Tmwoodall]

Has anyone done a two or three gauge layout? I am planning to do likely a 3 Guage setup. Two 4" gauges from speed hut, Speedo (with turn and bring indicator on gauge face) on left side, quad gauge on right side, and a 2 3/4 (maybe larger) tach right in the middle.

It'll be super clean just haven't seen anything like it before in our trucks. Plan to use my old 67 glovebox door for the mounting face.

[Dingfodgy]

I'm not done fabbing the dash....yet, but here is a quickly modded cluster. Once I get farther into the project, I'll replace the tach and get a repop SS quad gauge instead of the idiot lights.

[Tmwoodall]

Originally Posted by Dingfodgy

I'm not done fabbing the dash....yet, but here is a quickly modded cluster. Once I get farther into the project, I'll replace the tach and get a repop SS quad gauge instead of the idiot lights.
Attachment 857771

Thats pretty much exactly what I have sketched out, except mine like I said is on a glove box door. Thanks for the pic. I feel good about that now seeing something similar fleshed out.

[shawno72]

I just converted from the old three hole idiot lights to the factory gauge cluster, just looks so much better IMO.

[RenoKeene]

Here is my Tach dash with NOS woodgrain bezel during mockup