2wd Blazer and Jimmy's find thread

[tubbedII]

Originally Posted by bouncytruck

A lot of work put into this one. He has chopped it and the top fits. He's also cut the doors down to the bed height but figured out a way to keep door glass.

http://cgi.ebay.com/ebaymotors/1971-...item27b7ce1424

I've been waiting to see if this was possible. I'm most curious about what he did for the windows after he cut the door down. Is there just enough window there that all you need to do is cut it and re-do the felts/runners, given you don't tilt the windshield back?

[PHAT TONY]

Originally Posted by tubbedII

I've been waiting to see if this was possible. I'm most curious about what he did for the windows after he cut the door down. Is there just enough window there that all you need to do is cut it and re-do the felts/runners, given you don't tilt the windshield back?

When you roll the windows up the "sash" comes just under the belt moulding,just cutting the doors would hang the regulator above the new door profile. I see it has part of a jeep top mated to the Blazer top as well; car firewall, floors, frame? Hhmmmhh.

[bouncytruck]

Originally Posted by PHAT TONY

When you roll the windows up the "sash" comes just under the belt moulding,just cutting the doors would hang the regulator above the new door profile. I see it has part of a jeep top mated to the Blazer top as well; car firewall, floors, frame? Hhmmmhh.

I'm guessing that since he chopped the top, he had "extra" window so the regulators don't need to be all the way up.