TN 72 Cheyenne - Frame, patch panels, rear leaf springs

[72ArizonaBurb]

I have stripped a 72 Cheyenne and all that is left is the cab, bed, frame rails and rear leaf springs. Does anybody need any patch panels from the cab for bed cut out? Anybody need sections from the frame? This truck came stock with leaf springs and I will remove them if someone can use them.

Not sure how to price something like this. Just let me know what you need and I will see if it is good.

This is not good: cab corners, rockers, tail gate. The bed has rust in places but I could get some good patches of it.

To try to keep with the rules of the website. Rear leaf springs $100 + shipping.

[gsd66nova]

Is the bed straight? can you post some pics of it?

Thanks, Shane.

[72ArizonaBurb]

The bed has some rust around the wheel wells and few places coming through the floor. The wheel tubs look like they are ok and I could get some good patch panels out of it. Other than that the bed is not worth putting on truck as it is. I will take some pictures and post tommorow night.

Originally Posted by gsd66nova

Is the bed straight? can you post some pics of it?

Thanks, Shane.

[gsd66nova]

Cool, Thsnks.

[FIREBALL]

any pic's?

[72ArizonaBurb]

pic's tomorrow afternoon or evening.

[Leroy-B1]

is the frame long or short?

[72ArizonaBurb]

This was a long bed truck.

[bean]

I need the area above the windshield, from the passenger side corner to the drivers corner. how much would you be thinking? thanks

[72ArizonaBurb]

Bean I think mine has rust there. Are you wanting the area under the drip rail to the windshield? How do you think the best way to cut this out would be? Do you need the interior side or the exterior side?

Originally Posted by bean

I need the area above the windshield, from the passenger side corner to the drivers corner. how much would you be thinking? thanks

[72ArizonaBurb]

I just went out and looked at it. It has some rust showing. I think you could find a better one than mine for that area.

[72ArizonaBurb]

More pics attached

[neo1370]

interested in front leaf spring hangers pending pics & price.

[72ArizonaBurb]

You need the pieces that are rivited to the frame correct?

Originally Posted by neo1370

interested in front leaf spring hangers pending pics & price.

[alsriv2]

I sure could use those inner kick panels on the left and right sides if they are still solid. I can't really see the condition from the pics.

Al
'69 GMC 2500 custom
'69 Chevy C10 396

[72ArizonaBurb]

I will look at it in the morning. Do you need them be solid all the way to floor or down to within a 1/2" be okay? Where do you want me to cut them at if they are okay?

Originally Posted by alsriv2

I sure could use those inner kick panels on the left and right sides if they are still solid. I can't really see the condition from the pics.

Al
'69 GMC 2500 custom
'69 Chevy C10 396

[neo1370]

yes,front pieces only.

[72ArizonaBurb]

I looked at these pieces and I really cant get to them to get them out. The fender wells on my trailer are in the way.

Originally Posted by neo1370

yes,front pieces only.

[alsriv2]

Originally Posted by 72ArizonaBurb

I will look at it in the morning. Do you need them be solid all the way to floor or down to within a 1/2" be okay? Where do you want me to cut them at if they are okay?

Looking for as much clean metal around the vents as possible. My truck is good down near the floor, so the 1/2" would be fine.
I bought the truck from a farmer in Nebraska 5 years ago and found some nesting activity in the vents that rusted the vents out completely.
The truck was used as a camping/hunting vehicle and has low mileage, but it has minor rust in areas where farming dirt and field varmin could pack in.

Let me know what you find.

Thank you for your help!

Al
'69 GMC 2500 Custom
'69 Chevy C10 396

[72ArizonaBurb]

I looked at mine I think they are okay. I will send you a PM with my phone number. Call me so we can talk about exactly where you want them cut.

Thanks,

Originally Posted by alsriv2

Looking for as much clean metal around the vents as possible. My truck is good down near the floor, so the 1/2" would be fine.
I bought the truck from a farmer in Nebraska 5 years ago and found some nesting activity in the vents that rusted the vents out completely.
The truck was used as a camping/hunting vehicle and has low mileage, but it has minor rust in areas where farming dirt and field varmin could pack in.

Let me know what you find.

Thank you for your help!

Al
'69 GMC 2500 Custom
'69 Chevy C10 396

[rdnk07]

wondering if you still had ne pieces of this cab left, i need the whole like transmission cover area, the center of the floor board, mine was all hacked up from someone trying to rig a floor shifter on a saginaw

[72ArizonaBurb]

Sorry but I no longer have the truck.