'67 5.3L Build Thread - Page 12 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67C10BUB · 03-07-2011, 02:43 PM

Quote:

Originally Posted by smokinstang70

Truck is looking great man... hope mine turns out looking this good.

Question... can you post a picture of your oil dip stick install? you used a ED5008 (Lokar) stick right?

Thanks man

These are the part numbers for the Lokar LSX dip sticks.
ED-5020 LS Series Car Motor 1997 and up with Doug Thorley TRY Y headers
ED-5021 LS Series Truck Motor 1999 and up with Doug Thorley TRY Y headers

I used the truck one since mine is a 5.3L. I'll try and get a pic soon.

love my 72 · 03-08-2011, 03:24 AM

Great build! allot of useful information you got here. I have a question, maybe you or some one following the build can help me out.

Is it possible to remove either one of these plugs (pointed out by the red arrows) for an oil pressure sending unit? the 6.0L im working with has an external oil cooler that i would like to keep, thats why the pictured setup would not work for me. unless i tap in to one of the lines but im thinking that if i tap the return line i might not get the most accurate PSI reading.

67C10BUB · 03-08-2011, 06:46 AM

I wish I knew, but I can't say for certain.

*mrhino* · 03-08-2011, 08:12 AM

Quote:

Originally Posted by love my 72

Great build! allot of useful information you got here. I have a question, maybe you or some one following the build can help me out.

Is it possible to remove either one of these plugs (pointed out by the red arrows) for an oil pressure sending unit? the 6.0L im working with has an external oil cooler that i would like to keep, thats why the pictured setup would not work for me. unless i tap in to one of the lines but im thinking that if i tap the return line i might not get the most accurate PSI reading.

Im not completely sure, but I think those are coolant plugs There is a oil pressure port on top of the block, behind the intake.

usmcchevy · 03-08-2011, 08:33 AM

I'm not sure where it goes yet, but they are talking about a oil press adapter for the back of the block here.

http://67-72chevytrucks.com/vboard/s...=435538&page=4

Normy71 · 03-08-2011, 09:17 AM

Wow I like how this turned out!
Can you tell me about your intake who makes that one? did you just use the stock MAP ?
Thanks
Posted via Mobile Device

love my 72 · 03-08-2011, 08:42 PM

Thanks USMCCHEVY, that was verry helpful, now i just have to locate a tee with the m16x1.5 threads on it so i can get psi readings for the computer as well as the dakota digital dash i plan on runing. or drill and tap the aluminum block on the oil cooler lines

67c10bub and mrhino, thanks for your input! preciate it fellas!

67C10BUB · 03-19-2011, 01:17 PM

Quote:

Originally Posted by smokinstang70

Truck is looking great man... hope mine turns out looking this good.

Question... can you post a picture of your oil dip stick install? you used a ED5008 (Lokar) stick right?

Thanks man

Here are the pics you requested. It has an O-ring seal at the block that just slips into place.

67C10BUB · 03-19-2011, 01:20 PM

Check out the the tire/wheel combo!!! They are Showwheels polished Streeters 20x8.5 front and 20x10 back. The tires are 245/35-20 front and 275/35-20 back. I love the way it turned out and these wheels are a killer deal.

67chevy1series · 03-19-2011, 02:02 PM

okay shave the markers and your done!

short-t · 03-19-2011, 04:04 PM

Nice work, you and I have used pretty much all of the same swap parts, but you got yours finished much quicker! My problem is I can't get off of this damn computer!!

Do you have any updates on your ac?

mcbassin · 03-19-2011, 04:07 PM

Hey, those rims looks great! Looks like a million $$$

tantrumpipeline · 03-19-2011, 05:08 PM

Looks great! Nice work, now we need a tire smoking video
Posted via Mobile Device

*mrhino* · 03-19-2011, 06:39 PM

looks sweet!

67C10BUB · 03-19-2011, 10:10 PM

Quote:

Originally Posted by 67chevy1series

okay shave the markers and your done!

That's the plan.

67C10BUB · 03-19-2011, 10:11 PM

Quote:

Originally Posted by short-t

Nice work, you and I have used pretty much all of the same swap parts, but you got yours finished much quicker! My problem is I can't get off of this damn computer!!

Do you have any updates on your ac?

No, nothing new on the AC. I will definitely post it when I do.

67chevy1series · 03-19-2011, 10:28 PM

Quote:

Originally Posted by 67C10BUB

That's the plan.

really? SWEET!!!!!

67C10BUB · 03-19-2011, 11:30 PM

Quote:

Originally Posted by 67chevy1series

really? SWEET!!!!!

Yup, when I get the paint redone I am hoping to have those filled in. It will give it the true '67 look.

67chevy1series · 03-19-2011, 11:57 PM

ya thats why i asked if it was really a 68, that true 67 look is awsome

usmcchevy · 03-20-2011, 12:02 AM

Truck looks awesome!........call me weird, but I've always like the maker lights.

5150.4.67 · 03-20-2011, 12:07 AM

^^^^^ x2........

67C10BUB · 03-20-2011, 12:23 AM

Thanks everyone for the kind words. I like the markers also, but on year appropriate trucks.

67shortie · 03-20-2011, 12:00 PM

Looks fantastic, been following with great interest on your build and it's turning out awesome

67C10BUB · 03-20-2011, 12:27 PM

Thanks.
Posted via Mobile Device

mcbassin · 03-20-2011, 06:44 PM

Quote:

Originally Posted by usmcchevy

Truck looks awesome!........call me weird, but I've always like the maker lights.

You're not the only one.

03-08-2011, 03:24 AM	#277
love my 72 Registered User Join Date: Jul 2000 Location: East Bay,CA Posts: 298	Re: '67 5.3L Build Thread Great build! allot of useful information you got here. I have a question, maybe you or some one following the build can help me out. Is it possible to remove either one of these plugs (pointed out by the red arrows) for an oil pressure sending unit? the 6.0L im working with has an external oil cooler that i would like to keep, thats why the pictured setup would not work for me. unless i tap in to one of the lines but im thinking that if i tap the return line i might not get the most accurate PSI reading. Attached Images __________________ 51 Chevy 3100 Deluxe Cab(SOLD) 65 **stang 6cyl 70 C10 Long Bed Fleetside(1st truck,thanks Dad![SOLD]) 72 C10 Short Bed Fleetside 73 Blazer 2WD Catalina Blue White Top(Needs Love) 73 Blazer 2WD Work in progress LT1/4L60E 83 Grand National (SOLD) 94 Blazer K1500 Silverado (SOLD) 96 Impala SS All original (NEXT IN LINE 2 B SOLD) 99 Tahoe 2DR, 2WD

03-08-2011, 06:46 AM	#278
67C10BUB Registered User Join Date: Aug 2010 Location: Alta Loma, CA Posts: 610	Re: '67 5.3L Build Thread I wish I knew, but I can't say for certain. __________________ 67 5.3L Build

03-08-2011, 08:33 AM	#280
usmcchevy Has more rust than truck... Join Date: Apr 2005 Location: Ivanhoe, MN Posts: 2,421	Re: '67 5.3L Build Thread I'm not sure where it goes yet, but they are talking about a oil press adapter for the back of the block here. http://67-72chevytrucks.com/vboard/s...=435538&page=4 __________________ 1972 Custom/10 SWB, 4.8/4l80e Build thread LSx Swap FAQ index

03-08-2011, 09:17 AM	#281
Normy71 Registered User Join Date: Apr 2009 Location: Saskatchewan, Canada Posts: 236	Re: '67 5.3L Build Thread Wow I like how this turned out! Can you tell me about your intake who makes that one? did you just use the stock MAP ? Thanks Posted via Mobile Device __________________ Rolled the dice and lost!! Check Out my 71 build http://67-72chevytrucks.com/vboard/s...d.php?t=375158

03-08-2011, 08:42 PM	#282
love my 72 Registered User Join Date: Jul 2000 Location: East Bay,CA Posts: 298	Re: '67 5.3L Build Thread Thanks USMCCHEVY, that was verry helpful, now i just have to locate a tee with the m16x1.5 threads on it so i can get psi readings for the computer as well as the dakota digital dash i plan on runing. or drill and tap the aluminum block on the oil cooler lines 67c10bub and mrhino, thanks for your input! preciate it fellas! __________________ 51 Chevy 3100 Deluxe Cab(SOLD) 65 **stang 6cyl 70 C10 Long Bed Fleetside(1st truck,thanks Dad![SOLD]) 72 C10 Short Bed Fleetside 73 Blazer 2WD Catalina Blue White Top(Needs Love) 73 Blazer 2WD Work in progress LT1/4L60E 83 Grand National (SOLD) 94 Blazer K1500 Silverado (SOLD) 96 Impala SS All original (NEXT IN LINE 2 B SOLD) 99 Tahoe 2DR, 2WD

03-19-2011, 01:20 PM	#284
67C10BUB Registered User Join Date: Aug 2010 Location: Alta Loma, CA Posts: 610	Re: '67 5.3L Build Thread Check out the the tire/wheel combo!!! They are Showwheels polished Streeters 20x8.5 front and 20x10 back. The tires are 245/35-20 front and 275/35-20 back. I love the way it turned out and these wheels are a killer deal. Attached Images __________________ 67 5.3L Build

03-19-2011, 02:02 PM	#285
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: '67 5.3L Build Thread okay shave the markers and your done!

03-19-2011, 04:04 PM	#286
short-t Registered User Join Date: Mar 2008 Location: Calgary, ab Posts: 324	Re: '67 5.3L Build Thread Nice work, you and I have used pretty much all of the same swap parts, but you got yours finished much quicker! My problem is I can't get off of this damn computer!! Do you have any updates on your ac? __________________ 1968 C10 LS2/4L70e swb fleet side. ECE front disk conversion and 3.5/5 drop. SOLD. 1968 C20 Custom Camper 396 50th survivor! SOLD to northerngmc Last edited by short-t; 03-19-2011 at 04:04 PM.

03-19-2011, 04:07 PM	#287
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: '67 5.3L Build Thread Hey, those rims looks great! Looks like a million $$$ __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

03-19-2011, 05:08 PM	#288
tantrumpipeline Master Procrastinator Join Date: Sep 2009 Location: Grande Prairie AB Canada Posts: 1,128	Re: '67 5.3L Build Thread Looks great! Nice work, now we need a tire smoking video Posted via Mobile Device __________________ My Buildhttp://67-72chevytrucks.com/vboard/s...d.php?t=395506 20 Duramax tow pig 68 2wd short stepper project 77 2wd short fleet beater 52 short project

03-19-2011, 06:39 PM	#289
mrhino Account Suspended Join Date: Aug 2007 Location: USA Posts: 1,223	Re: '67 5.3L Build Thread looks sweet!

03-19-2011, 11:57 PM	#294
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: '67 5.3L Build Thread ya thats why i asked if it was really a 68, that true 67 look is awsome

03-20-2011, 12:02 AM	#295
usmcchevy Has more rust than truck... Join Date: Apr 2005 Location: Ivanhoe, MN Posts: 2,421	Re: '67 5.3L Build Thread Truck looks awesome!........call me weird, but I've always like the maker lights. __________________ 1972 Custom/10 SWB, 4.8/4l80e Build thread LSx Swap FAQ index

03-20-2011, 12:07 AM	#296
5150.4.67 Registered User Join Date: Dec 2007 Location: Modesto, Ca Posts: 411	Re: '67 5.3L Build Thread ^^^^^ x2........

03-20-2011, 12:23 AM	#297
67C10BUB Registered User Join Date: Aug 2010 Location: Alta Loma, CA Posts: 610	Re: '67 5.3L Build Thread Thanks everyone for the kind words. I like the markers also, but on year appropriate trucks. __________________ 67 5.3L Build



Register or Log In To remove these advertisements.

03-20-2011, 12:00 PM	#298
67shortie Green club Join Date: May 2002 Location: Central CA Posts: 1,059	Re: '67 5.3L Build Thread Looks fantastic, been following with great interest on your build and it's turning out awesome __________________ 71 short/fleet ECE 4/6 drop, LQ4/700r4/3.42 gears 70 SS396 Chevelle 427/200-4R/3.73posi 61 Lincoln Continental, black on black Son you are going to drive me to drinkin if you don't stop drivin that hot rod lincoln

03-20-2011, 12:27 PM	#299
67C10BUB Registered User Join Date: Aug 2010 Location: Alta Loma, CA Posts: 610	Re: '67 5.3L Build Thread Thanks. Posted via Mobile Device __________________ 67 5.3L Build

Register or Log In To remove these advertisements.