LA CPP motor perches,mounts and Ls plates - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Nobby** · 07-22-2012, 08:20 PM

Brand new..I used them to set my 5.3 and they would'nt work with the manifolds I'm using. Use them for sb,bb or Ls. $160.00 shipped

**brownge** · 07-23-2012, 12:48 AM

Interested. Let me verify they'll work on the LSX 454.
Posted via Mobile Device

**brownge** · 07-23-2012, 01:49 AM

Looks like those engine adapters are the ones I have. Do you want to sell just the perches?

**Hart_Rod** · 07-23-2012, 08:03 AM

Nobby do you have pictures of them installed on an LS? I'm curious of how they place the motor. Thanks,

Rob

**Nobby** · 07-23-2012, 03:26 PM

Quote:

Originally Posted by brownge

Looks like those engine adapters are the ones I have. Do you want to sell just the perches?

Sorry, I don't want to seperate right now...

Quote:

Originally Posted by Hart_Rod

Nobby do you have pictures of them installed on an LS? I'm curious of how they place the motor. Thanks,

Rob

Hey Rob, I didn't take a pic with these.. But the plates move motor 1 1/4'' forward..The oilpan was 1/2'' from crossmember..Just did not work with manifolds and I wasn't in the mood to spend over $600.00 for headers

**Hart_Rod** · 07-23-2012, 04:02 PM

Quote:

Originally Posted by Nobby

Sorry, I don't want to seperate right now...

Hey Rob, I didn't take a pic with these.. But the plates move motor 1 1/4'' forward..The oilpan was 1/2'' from crossmember..Just did not work with manifolds and I wasn't in the mood to spend over $600.00 for headers

What oilpan?

**Nobby** · 07-23-2012, 04:16 PM

Quote:

Originally Posted by Hart_Rod

What oilpan?

Factory 03 truck pan

Timbo1 · 07-23-2012, 04:45 PM

Quote:

Originally Posted by Hart_Rod

Nobby do you have pictures of them installed on an LS? I'm curious of how they place the motor. Thanks,

Rob

Here is a picture no very close up, but im sure you can zoom in on your computer. this is the furthest back, i have since moved them forward 2 inchs, they are very adjustable

Timbo1 · 07-23-2012, 04:48 PM

another view , hope these help

**mahanian** · 07-23-2012, 04:53 PM

Are the mounts rubber or poly?

**Nobby** · 07-23-2012, 04:55 PM

rubber

**Nobby** · 07-23-2012, 10:03 PM

Thanks for the pics Timbo...I also found one I took..Hope this helps Rob..

**Hart_Rod** · 07-24-2012, 03:19 PM

Quote:

Originally Posted by Nobby

Thanks for the pics Timbo...I also found one I took..Hope this helps Rob..

Do these use the factory holes? Will these work with Doug Thorley LS headers?

**Nobby** · 07-24-2012, 03:35 PM

Quote:

Originally Posted by Hart_Rod

Do these use the factory holes? Will these work with Doug Thorley LS headers?

Well I ordered the 1 1/4 plates cause I read on here thats what a guy used. During install I had drill hole 1/2'' back. I think with the standard plates it would bolt rite in. My plan was to use DT headers,just didn't want to let go the 600 bucks. So I went with some 09 manifolds.

**chapster** · 07-24-2012, 03:39 PM

Hey Hart Rod,

I have mocked up my Doug Thorely header using these with no issues. I did weld a pad on the cross member to ensure bottom of CPP mount sit 100% flush.

Check out post #'s 12, 62 & 94 in my build thread that is going in "reverse."

Hope this helps

**Nobby** · 07-24-2012, 03:47 PM

This is what I went with. See the hole behind the new tower, Thats the hole I drilled for the cpp mounts

Billy68 · 07-29-2012, 08:06 AM

Would you accept $150 shipped to GA 30264? I will paypal immediately upon your reply. Thanks for considering my offer.

**Nobby** · 07-29-2012, 10:17 AM

Quote:

Originally Posted by Billy68

Would you accept $150 shipped to GA 30264? I will paypal immediately upon your reply. Thanks for considering my offer.

I can do that Billy...I'll pm ya my Paypal addy..

Billy68 · 08-01-2012, 07:51 PM

CPP motor perches,mounts and Ls plates received today - as described and shipped fast. Thanks Nobby!

07-22-2012, 08:20 PM	#1
Nobby Senior Member Join Date: Feb 2005 Location: St. Amant Louisiana Posts: 639	CPP motor perches,mounts and Ls plates Brand new..I used them to set my 5.3 and they would'nt work with the manifolds I'm using. Use them for sb,bb or Ls. $160.00 shipped Attached Images

07-23-2012, 12:48 AM	#2
brownge Active Member Join Date: Jun 2008 Location: Magnolia, TX Posts: 149	Re: CPP motor perches,mounts and Ls plates Interested. Let me verify they'll work on the LSX 454. Posted via Mobile Device __________________ My build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=509208

07-23-2012, 01:49 AM	#3
brownge Active Member Join Date: Jun 2008 Location: Magnolia, TX Posts: 149	Re: CPP motor perches,mounts and Ls plates Looks like those engine adapters are the ones I have. Do you want to sell just the perches? __________________ My build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=509208

07-23-2012, 08:03 AM	#4
Hart_Rod Boomer Sooner! Join Date: Apr 2005 Location: Northwest FL Posts: 11,931	Re: CPP motor perches,mounts and Ls plates Nobby do you have pictures of them installed on an LS? I'm curious of how they place the motor. Thanks, Rob __________________ Rob As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 69 SuperBurb - "My grandpa used to have a Suburban exactly like that." http://67-72chevytrucks.com/vboard/s...d.php?t=200387 6T8 ZZZZ - Farm truck... original paint, slammed, tubbed, stroked, blown and "Bad 2 da Bone"! http://67-72chevytrucks.com/vboard/s...d.php?t=358692 Project Shifted: http://67-72chevytrucks.com/vboard/s...d.php?t=551258 DONKEY http://67-72chevytrucks.com/vboard/s...d.php?t=226302 1948 Chevy http://67-72chevytrucks.com/vboard/s...=122164&page=3 FAQ: http://67-72chevytrucks.com/vboard/f...play.php?f=220

07-23-2012, 04:48 PM	#9
Timbo1 Registered User Join Date: Apr 2011 Location: Gilbert Az Posts: 258	Re: CPP motor perches,mounts and Ls plates another view , hope these help Attached Images __________________ Check out my other build http://67-72chevytrucks.com/vboard/s...d.php?t=457288 http://67-72chevytrucks.com/vboard/s...d.php?t=517089

07-23-2012, 04:53 PM	#10
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 1,867	Re: CPP motor perches,mounts and Ls plates Are the mounts rubber or poly? __________________ Jared 67 C10 CST Short Fleet Big Window 67 Camaro RS

07-23-2012, 04:55 PM	#11
Nobby Senior Member Join Date: Feb 2005 Location: St. Amant Louisiana Posts: 639	Re: CPP motor perches,mounts and Ls plates rubber

07-23-2012, 10:03 PM	#12
Nobby Senior Member Join Date: Feb 2005 Location: St. Amant Louisiana Posts: 639	Re: CPP motor perches,mounts and Ls plates Thanks for the pics Timbo...I also found one I took..Hope this helps Rob.. Attached Images

07-24-2012, 03:39 PM	#15
chapster Senior Member Join Date: Jul 2005 Location: .. Posts: 415	Re: CPP motor perches,mounts and Ls plates Hey Hart Rod, I have mocked up my Doug Thorely header using these with no issues. I did weld a pad on the cross member to ensure bottom of CPP mount sit 100% flush. Check out post #'s 12, 62 & 94 in my build thread that is going in "reverse." Hope this helps __________________ Parts Pile: NoLimit, Kore 3, Matts Classic Bowtie, March Performance, Lokar, ScottsHot Rods, Vintage Air, American Auto Wire, Circle D, Accu Air, Borla, Budnik, Ididit, One Piece Windows, Doug Thorley, Pypes, AutoLoc, Porterbuilt, CPP, Dynamat

07-24-2012, 03:47 PM	#16
Nobby Senior Member Join Date: Feb 2005 Location: St. Amant Louisiana Posts: 639	Re: CPP motor perches,mounts and Ls plates This is what I went with. See the hole behind the new tower, Thats the hole I drilled for the cpp mounts Attached Images

07-29-2012, 08:06 AM	#17
Billy68 Registered User Join Date: Sep 2011 Location: palmetto,ga Posts: 9	Re: CPP motor perches,mounts and Ls plates Would you accept $150 shipped to GA 30264? I will paypal immediately upon your reply. Thanks for considering my offer.

08-01-2012, 07:51 PM	#19
Billy68 Registered User Join Date: Sep 2011 Location: palmetto,ga Posts: 9	Re: CPP motor perches,mounts and Ls plates CPP motor perches,mounts and Ls plates received today - as described and shipped fast. Thanks Nobby!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.