NY WTB: Outer edge bench seat springs, and I6 fan guard - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Jimbabwe · 10-25-2012, 07:16 PM

WTB: Outer edge bench seat springs for a 67-72 bench, and I6 fan guard (not a fan shroud. The mini thing.)
Thanks

FL71C10 · 10-25-2012, 08:52 PM

I've got a fan guard, and an old bench seat. I'll take $20 plus shipping for the fan guard, and $25 plus shipping for whatever springs you want removed from the seat.

Jimbabwe · 10-25-2012, 09:15 PM

That sounds good to me, thanks. I need the spring that goes from top to bottom on the outside of the bench on either side to support the outer edge. The convoluted busy looking thing. I'll take both sides. I'll also take a handful of the flat springs that go front to back right under the foam along the length of the bench seat, since a few of those are also broken. Or all of them for that matter, in case I need 'em again, if it's not a real pain in the ass for you to get them out.
Let me know how you'd like payment. If you could shoot me a pic or 2 to confirm they're they ones I need that would be great. Thanks again, I appreciate it.
Jim

FL71C10 · 10-25-2012, 09:19 PM

Sure, I'll post a pic of the fan guard later tonight, and then I'll go pick up the seat out of the storage area tomorrow. I'll pull the cover off the seat and you can tell me which springs you need.

I'll pm you paypal info.

Jimbabwe · 10-25-2012, 09:30 PM

Thank you.
Here is a link to a post I made like 2 weeks ago asking about the springs if that helps.
http://67-72chevytrucks.com/vboard/s...d.php?t=546362

FL71C10 · 10-25-2012, 10:21 PM

here are a few pics of the fan guard. It's sanded down and almost ready for paint.

Jimbabwe · 10-25-2012, 10:24 PM

Cool. Thanks!

FL71C10 · 10-26-2012, 04:51 PM

Here's my seat with the cushion taken off. I don't have the same kind of flat springs, but the side springs look the same, I think.

Let me know what will work for you.

Jimbabwe · 10-26-2012, 04:56 PM

That'll work. Thank you!!

FL71C10 · 10-26-2012, 05:00 PM

Sure, how about $60 shipped? I think they will fit into a usps flat rate box.

Jimbabwe · 10-26-2012, 05:04 PM

Sure. Are you going to put the fan guard in the same box?

FL71C10 · 10-26-2012, 05:06 PM

yes

Jimbabwe · 10-26-2012, 05:07 PM

Very good, thanks.

FL71C10 · 10-26-2012, 11:44 PM

Pics of springs. The top picture is the drivers side. You can see where it is broken on the end. The passenger side is fine. I think you would be able to use that vertical spring part on the drivers side.

Let me know what you want to do.

10-25-2012, 07:16 PM	#1
Jimbabwe Registered User Join Date: Dec 2011 Location: New York City Posts: 648	WTB: Outer edge bench seat springs, and I6 fan guard WTB: Outer edge bench seat springs for a 67-72 bench, and I6 fan guard (not a fan shroud. The mini thing.) Thanks

10-25-2012, 08:52 PM	#2
FL71C10 Registered User Join Date: Jun 2010 Location: Orlando, Florida Posts: 2,508	Re: WTB: Outer edge bench seat springs, and I6 fan guard I've got a fan guard, and an old bench seat. I'll take $20 plus shipping for the fan guard, and $25 plus shipping for whatever springs you want removed from the seat. __________________ 71 Chevy C10 Shortbed Stepside. LT1 with 4l60E. Just got back from painter, in assembly now.

10-25-2012, 09:15 PM	#3
Jimbabwe Registered User Join Date: Dec 2011 Location: New York City Posts: 648	Re: WTB: Outer edge bench seat springs, and I6 fan guard That sounds good to me, thanks. I need the spring that goes from top to bottom on the outside of the bench on either side to support the outer edge. The convoluted busy looking thing. I'll take both sides. I'll also take a handful of the flat springs that go front to back right under the foam along the length of the bench seat, since a few of those are also broken. Or all of them for that matter, in case I need 'em again, if it's not a real pain in the ass for you to get them out. Let me know how you'd like payment. If you could shoot me a pic or 2 to confirm they're they ones I need that would be great. Thanks again, I appreciate it. Jim

10-25-2012, 09:19 PM	#4
FL71C10 Registered User Join Date: Jun 2010 Location: Orlando, Florida Posts: 2,508	Re: WTB: Outer edge bench seat springs, and I6 fan guard Sure, I'll post a pic of the fan guard later tonight, and then I'll go pick up the seat out of the storage area tomorrow. I'll pull the cover off the seat and you can tell me which springs you need. I'll pm you paypal info. __________________ 71 Chevy C10 Shortbed Stepside. LT1 with 4l60E. Just got back from painter, in assembly now.

10-25-2012, 09:30 PM	#5
Jimbabwe Registered User Join Date: Dec 2011 Location: New York City Posts: 648	Re: WTB: Outer edge bench seat springs, and I6 fan guard Thank you. Here is a link to a post I made like 2 weeks ago asking about the springs if that helps. http://67-72chevytrucks.com/vboard/s...d.php?t=546362

10-25-2012, 10:21 PM	#6
FL71C10 Registered User Join Date: Jun 2010 Location: Orlando, Florida Posts: 2,508	Re: WTB: Outer edge bench seat springs, and I6 fan guard here are a few pics of the fan guard. It's sanded down and almost ready for paint. Attached Images __________________ 71 Chevy C10 Shortbed Stepside. LT1 with 4l60E. Just got back from painter, in assembly now.

10-25-2012, 10:24 PM	#7
Jimbabwe Registered User Join Date: Dec 2011 Location: New York City Posts: 648	Re: WTB: Outer edge bench seat springs, and I6 fan guard Cool. Thanks!

10-26-2012, 04:51 PM	#8
FL71C10 Registered User Join Date: Jun 2010 Location: Orlando, Florida Posts: 2,508	Re: WTB: Outer edge bench seat springs, and I6 fan guard Here's my seat with the cushion taken off. I don't have the same kind of flat springs, but the side springs look the same, I think. Let me know what will work for you. Attached Images __________________ 71 Chevy C10 Shortbed Stepside. LT1 with 4l60E. Just got back from painter, in assembly now.

10-26-2012, 04:56 PM	#9
Jimbabwe Registered User Join Date: Dec 2011 Location: New York City Posts: 648	Re: WTB: Outer edge bench seat springs, and I6 fan guard That'll work. Thank you!!

10-26-2012, 05:00 PM	#10
FL71C10 Registered User Join Date: Jun 2010 Location: Orlando, Florida Posts: 2,508	Re: WTB: Outer edge bench seat springs, and I6 fan guard Sure, how about $60 shipped? I think they will fit into a usps flat rate box. __________________ 71 Chevy C10 Shortbed Stepside. LT1 with 4l60E. Just got back from painter, in assembly now.

10-26-2012, 05:04 PM	#11
Jimbabwe Registered User Join Date: Dec 2011 Location: New York City Posts: 648	Re: WTB: Outer edge bench seat springs, and I6 fan guard Sure. Are you going to put the fan guard in the same box?

10-26-2012, 05:06 PM	#12
FL71C10 Registered User Join Date: Jun 2010 Location: Orlando, Florida Posts: 2,508	Re: WTB: Outer edge bench seat springs, and I6 fan guard yes __________________ 71 Chevy C10 Shortbed Stepside. LT1 with 4l60E. Just got back from painter, in assembly now.

10-26-2012, 05:07 PM	#13
Jimbabwe Registered User Join Date: Dec 2011 Location: New York City Posts: 648	Re: WTB: Outer edge bench seat springs, and I6 fan guard Very good, thanks.

10-26-2012, 11:44 PM	#14
FL71C10 Registered User Join Date: Jun 2010 Location: Orlando, Florida Posts: 2,508	Re: WTB: Outer edge bench seat springs, and I6 fan guard Pics of springs. The top picture is the drivers side. You can see where it is broken on the end. The passenger side is fine. I think you would be able to use that vertical spring part on the drivers side. Let me know what you want to do. Attached Images __________________ 71 Chevy C10 Shortbed Stepside. LT1 with 4l60E. Just got back from painter, in assembly now.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.