The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1947 - 1959 Chevrolet & GMC Pickups Message Board > Projects and Builds

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 06-22-2013, 03:37 AM   #1
RockTonka
Registered User
 
RockTonka's Avatar
 
Join Date: Jun 2010
Location: Oklahoma City, OK
Posts: 1,524
"Hole in the Head" 48 GMC

I'm calling it that because that's about how much we need another project around here.

But, my son likes it and I hope it grows on me. He found this outside of Tulsa last week and after going back and forth with the owner a bit arrived at an agreement. He put a retainer on it and will pick it up after his next pay check.

It's a 48 GMC that, although rich in patina, doesn't seem to have any through rust anywhere. Definately missing some parts here and there, and some dents and dings, but not too bad. Was "running when parked" 30 some years ago and we'll play around with trying to get it to run, but probably won't keep it stock.

Few pics...
Attached Images
     
__________________
1958 Chevy 1 ton dually 4X4 dump/flat bed
My build thread

1966 "Not-So-Original" Chevy Custom Trim Suburban
My Time-Killing Project Truck

1966 GMC Extended cab 1 1/4 ton 4X4
My Son's build thread
RockTonka is offline   Reply With Quote
Old 06-22-2013, 03:41 AM   #2
RockTonka
Registered User
 
RockTonka's Avatar
 
Join Date: Jun 2010
Location: Oklahoma City, OK
Posts: 1,524
Re: "Hole in the Head" 48 GMC

Few more pics...
Attached Images
     
__________________
1958 Chevy 1 ton dually 4X4 dump/flat bed
My build thread

1966 "Not-So-Original" Chevy Custom Trim Suburban
My Time-Killing Project Truck

1966 GMC Extended cab 1 1/4 ton 4X4
My Son's build thread
RockTonka is offline   Reply With Quote
Old 06-22-2013, 07:49 AM   #3
crossfire84
Registered User
 
crossfire84's Avatar
 
Join Date: Jun 2012
Location: wind lake WI
Posts: 1,749
Re: "Hole in the Head" 48 GMC

your rite you don't need an other project, i think you should let me help you and take this off your hands. looks like a nice ride to be, good luck.
__________________
LIL ERV the 50-3600
396 BBC stroked to 415 cid
Richmond 6spd over drive
C4 rear
Porter built a arms
Never give the Devil a ride,because he'll want to Drive!
crossfire84 is offline   Reply With Quote
Old 06-22-2013, 08:33 AM   #4
Katrina/10
Registered User
 
Katrina/10's Avatar
 
Join Date: Oct 2010
Location: Ocean Springs, MS
Posts: 1,746
Re: "Hole in the Head" 48 GMC

Totally cool truck, thanks for the pictures!
__________________
Gary

1971 Chevrolet C/10
1951 GMC 100
1977 GMC C15
1955 Chevrolet 3100
Katrina/10 is offline   Reply With Quote
Old 06-22-2013, 09:12 AM   #5
mknittle
Registered User
 
mknittle's Avatar
 
Join Date: Jul 2011
Location: Auburn ca.
Posts: 2,886
Re: "Hole in the Head" 48 GMC

I like the grille! I know where there is another one like it
__________________
Mark

My GMC build.
http://67-72chevytrucks.com/vboard/s...d.php?t=536602

Last edited by mknittle; 06-22-2013 at 09:24 AM.
mknittle is offline   Reply With Quote
Old 06-22-2013, 02:11 PM   #6
RockTonka
Registered User
 
RockTonka's Avatar
 
Join Date: Jun 2010
Location: Oklahoma City, OK
Posts: 1,524
Re: "Hole in the Head" 48 GMC

Quote:
Originally Posted by crossfire84 View Post
your rite you don't need an other project, i think you should let me help you and take this off your hands. looks like a nice ride to be, good luck.
Thanks, this may sit for for a while...or maybe we'll jump into it...been looking at alot of of cool trucks of this era as I research options

Quote:
Originally Posted by Katrina/10 View Post
Totally cool truck, thanks for the pictures!
Thanks and your more than welcome!!

Quote:
Originally Posted by mknittle View Post
I like the grille! I know where there is another one like it
I looked all through your build...not one pic of that grill you're talking about! Lots of nice home brew solutions going on there...gonna be stealing some ideas from you. By the way, where's your update pics??? I wanna see what you've got done over the last year or so...
__________________
1958 Chevy 1 ton dually 4X4 dump/flat bed
My build thread

1966 "Not-So-Original" Chevy Custom Trim Suburban
My Time-Killing Project Truck

1966 GMC Extended cab 1 1/4 ton 4X4
My Son's build thread
RockTonka is offline   Reply With Quote
Old 06-22-2013, 09:16 PM   #7
_Ogre
Registered User
 
_Ogre's Avatar
 
Join Date: Jan 2012
Location: Motown
Posts: 7,680
Re: "Hole in the Head" 48 GMC

holy smoley that OK sun must be brutal

__________________
cool, an ogre smiley Ogre's 58 Truk build

how to put your truck year and build thread into your signature
shop air compressor timer
_Ogre is offline   Reply With Quote
Old 06-23-2013, 01:35 AM   #8
RockTonka
Registered User
 
RockTonka's Avatar
 
Join Date: Jun 2010
Location: Oklahoma City, OK
Posts: 1,524
Re: "Hole in the Head" 48 GMC

Yep, that patina is carried right over to the inside
__________________
1958 Chevy 1 ton dually 4X4 dump/flat bed
My build thread

1966 "Not-So-Original" Chevy Custom Trim Suburban
My Time-Killing Project Truck

1966 GMC Extended cab 1 1/4 ton 4X4
My Son's build thread
RockTonka is offline   Reply With Quote
Old 06-26-2013, 07:56 PM   #9
flatbed51
Registered User
 
flatbed51's Avatar
 
Join Date: Dec 2010
Location: Caddo Oklahoma
Posts: 164
Re: "Hole in the Head" 48 GMC

Good looking project !
__________________
My Build Thread
51 chevy
http://67-72chevytrucks.com/vboard/s...d.php?t=437496

48,49,50 Chevy trucks. 41 Olds
flatbed51 is offline   Reply With Quote
Old 06-27-2013, 01:40 AM   #10
RockTonka
Registered User
 
RockTonka's Avatar
 
Join Date: Jun 2010
Location: Oklahoma City, OK
Posts: 1,524
Re: "Hole in the Head" 48 GMC

Quote:
Originally Posted by flatbed51 View Post
Good looking project !
Thanks fb51, what did you end up doing with that 49 you picked up in March?? You were hoping to have it running this summer...
__________________
1958 Chevy 1 ton dually 4X4 dump/flat bed
My build thread

1966 "Not-So-Original" Chevy Custom Trim Suburban
My Time-Killing Project Truck

1966 GMC Extended cab 1 1/4 ton 4X4
My Son's build thread
RockTonka is offline   Reply With Quote
Old 06-27-2013, 06:29 PM   #11
flatbed51
Registered User
 
flatbed51's Avatar
 
Join Date: Dec 2010
Location: Caddo Oklahoma
Posts: 164
Re: "Hole in the Head" 48 GMC

Quote:
Originally Posted by RockTonka View Post
Thanks fb51, what did you end up doing with that 49 you picked up in March?? You were hoping to have it running this summer...
The 49 is still sitting right where I unloaded it. Waiting on my shop to get finished. They promised me it would be ready in two weeks. Meanwhile I have been working on my 51 flatbed at a buddys shop. Problem is he is an hour and a half away, so only get down there on the weekends.
__________________
My Build Thread
51 chevy
http://67-72chevytrucks.com/vboard/s...d.php?t=437496

48,49,50 Chevy trucks. 41 Olds
flatbed51 is offline   Reply With Quote
Old 06-27-2013, 10:00 PM   #12
mknittle
Registered User
 
mknittle's Avatar
 
Join Date: Jul 2011
Location: Auburn ca.
Posts: 2,886
Re: "Hole in the Head" 48 GMC

Quote:
Originally Posted by RockTonka View Post
Thanks, this may sit for for a while...or maybe we'll jump into it...been looking at alot of of cool trucks of this era as I research options



Thanks and your more than welcome!!



I looked all through your build...not one pic of that grill you're talking about! Lots of nice home brew solutions going on there...gonna be stealing some ideas from you. By the way, where's your update pics??? I wanna see what you've got done over the last year or so...
Thanks I like to build as much as I can it is sort of therapy after a round of brain cancer.
I got to get on the up dates. it seems every time I get started something happens and I get distracted.
__________________
Mark

My GMC build.
http://67-72chevytrucks.com/vboard/s...d.php?t=536602
mknittle is offline   Reply With Quote
Old 06-27-2013, 10:18 PM   #13
mknittle
Registered User
 
mknittle's Avatar
 
Join Date: Jul 2011
Location: Auburn ca.
Posts: 2,886
Re: "Hole in the Head" 48 GMC

here are a couple. I haven't decided if I am going to use it yet though.
The good thing is it would give me more room for a A/C condenser and electric fan in front of the radiator.
Attached Images
  
__________________
Mark

My GMC build.
http://67-72chevytrucks.com/vboard/s...d.php?t=536602
mknittle is offline   Reply With Quote
Old 06-27-2013, 11:38 PM   #14
RockTonka
Registered User
 
RockTonka's Avatar
 
Join Date: Jun 2010
Location: Oklahoma City, OK
Posts: 1,524
Re: "Hole in the Head" 48 GMC

Quote:
Originally Posted by flatbed51 View Post
The 49 is still sitting right where I unloaded it. Waiting on my shop to get finished. They promised me it would be ready in two weeks. Meanwhile I have been working on my 51 flatbed at a buddys shop. Problem is he is an hour and a half away, so only get down there on the weekends.
Ahh, gotcha. I bet you're excited to have your shop nearly finished. Are you gonna bring the 51 back once you've got your shop?
__________________
1958 Chevy 1 ton dually 4X4 dump/flat bed
My build thread

1966 "Not-So-Original" Chevy Custom Trim Suburban
My Time-Killing Project Truck

1966 GMC Extended cab 1 1/4 ton 4X4
My Son's build thread
RockTonka is offline   Reply With Quote
Old 06-27-2013, 11:46 PM   #15
RockTonka
Registered User
 
RockTonka's Avatar
 
Join Date: Jun 2010
Location: Oklahoma City, OK
Posts: 1,524
Re: "Hole in the Head" 48 GMC

Quote:
Originally Posted by mknittle View Post
Thanks I like to build as much as I can it is sort of therapy after a round of brain cancer.
I got to get on the up dates. it seems every time I get started something happens and I get distracted.
Glad to hear that you're kicking cancer's *ss, working on these old trucks is the best kind of therapy.
Your grill looks to be in better shape than ours, there doesn't seem to be that many being built...maybe the production numbers were lower , anyway, my vote is to use it
__________________
1958 Chevy 1 ton dually 4X4 dump/flat bed
My build thread

1966 "Not-So-Original" Chevy Custom Trim Suburban
My Time-Killing Project Truck

1966 GMC Extended cab 1 1/4 ton 4X4
My Son's build thread
RockTonka is offline   Reply With Quote
Old 06-28-2013, 09:20 AM   #16
mknittle
Registered User
 
mknittle's Avatar
 
Join Date: Jul 2011
Location: Auburn ca.
Posts: 2,886
Re: "Hole in the Head" 48 GMC

Quote:
Originally Posted by RockTonka View Post
Glad to hear that you're kicking cancer's *ss, working on these old trucks is the best kind of therapy.
Your grill looks to be in better shape than ours, there doesn't seem to be that many being built...maybe the production numbers were lower , anyway, my vote is to use it
I have been "Cancer free" for five years now.

I haven't seen very many of those grilles. I do have one picture of a truck with one from the NSRA nationals about four years ago. To me they are ugly but in a cool sort of way. If I use it, it would sure give the truck character. My dad got that truck for just that grille maybe 20 years ago. Good thing that's all he wanted.
__________________
Mark

My GMC build.
http://67-72chevytrucks.com/vboard/s...d.php?t=536602
mknittle is offline   Reply With Quote
Old 06-28-2013, 03:42 PM   #17
flatbed51
Registered User
 
flatbed51's Avatar
 
Join Date: Dec 2010
Location: Caddo Oklahoma
Posts: 164
Re: "Hole in the Head" 48 GMC

Quote:
Originally Posted by RockTonka View Post
Ahh, gotcha. I bet you're excited to have your shop nearly finished. Are you gonna bring the 51 back once you've got your shop?
Yes Rock as soon as I can get everything squared away in the shop I plan on the 51 being the first to go in. Hey the very first vehicle I ever owned was a 1950 GMC. It was my first custom resto with my dad. We rattle canned the interior, and installed a rubber floor mat mail ordered from JC Whitney. That was 43 years ago, I was 15 at the time. Been bit by the truck bug ever since. 47-54's have always been my favorite.
__________________
My Build Thread
51 chevy
http://67-72chevytrucks.com/vboard/s...d.php?t=437496

48,49,50 Chevy trucks. 41 Olds
flatbed51 is offline   Reply With Quote
Old 06-28-2013, 11:57 PM   #18
RockTonka
Registered User
 
RockTonka's Avatar
 
Join Date: Jun 2010
Location: Oklahoma City, OK
Posts: 1,524
Re: "Hole in the Head" 48 GMC

Quote:
Originally Posted by mknittle View Post
I have been "Cancer free" for five years now.



I haven't seen very many of those grilles. I do have one picture of a truck with one from the NSRA nationals about four years ago. To me they are ugly but in a cool sort of way. If I use it, it would sure give the truck character. My dad got that truck for just that grille maybe 20 years ago. Good thing that's all he wanted.
Definitely ugly in a cool sort of way...or was that cool in an ugly sort of way

I like it because its different
__________________
1958 Chevy 1 ton dually 4X4 dump/flat bed
My build thread

1966 "Not-So-Original" Chevy Custom Trim Suburban
My Time-Killing Project Truck

1966 GMC Extended cab 1 1/4 ton 4X4
My Son's build thread
RockTonka is offline   Reply With Quote
Old 06-28-2013, 11:59 PM   #19
RockTonka
Registered User
 
RockTonka's Avatar
 
Join Date: Jun 2010
Location: Oklahoma City, OK
Posts: 1,524
Re: "Hole in the Head" 48 GMC

Quote:
Originally Posted by flatbed51 View Post
Yes Rock as soon as I can get everything squared away in the shop I plan on the 51 being the first to go in. Hey the very first vehicle I ever owned was a 1950 GMC. It was my first custom resto with my dad. We rattle canned the interior, and installed a rubber floor mat mail ordered from JC Whitney. That was 43 years ago, I was 15 at the time. Been bit by the truck bug ever since. 47-54's have always been my favorite.
That's cool...is that 50 GMC around anymore?
__________________
1958 Chevy 1 ton dually 4X4 dump/flat bed
My build thread

1966 "Not-So-Original" Chevy Custom Trim Suburban
My Time-Killing Project Truck

1966 GMC Extended cab 1 1/4 ton 4X4
My Son's build thread
RockTonka is offline   Reply With Quote
Old 06-29-2013, 03:14 PM   #20
flatbed51
Registered User
 
flatbed51's Avatar
 
Join Date: Dec 2010
Location: Caddo Oklahoma
Posts: 164
Re: "Hole in the Head" 48 GMC

Quote:
Originally Posted by RockTonka View Post
That's cool...is that 50 GMC around anymore?
Rock, wish I knew what ever happened to it. I traded it off right after I got my license for a 1964 Impala 2dr hdt.
__________________
My Build Thread
51 chevy
http://67-72chevytrucks.com/vboard/s...d.php?t=437496

48,49,50 Chevy trucks. 41 Olds
flatbed51 is offline   Reply With Quote
Old 07-03-2013, 12:42 AM   #21
RockTonka
Registered User
 
RockTonka's Avatar
 
Join Date: Jun 2010
Location: Oklahoma City, OK
Posts: 1,524
Re: "Hole in the Head" 48 GMC

We got the 48 home...don't know how soon we'll be able to devote some time to it, but at least it's out of the weather now.
Attached Images
  
__________________
1958 Chevy 1 ton dually 4X4 dump/flat bed
My build thread

1966 "Not-So-Original" Chevy Custom Trim Suburban
My Time-Killing Project Truck

1966 GMC Extended cab 1 1/4 ton 4X4
My Son's build thread
RockTonka is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:29 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com