Say it ain't so CPP Motor Mounts

[BigRed76]

Originally Posted by CPPJEFF

Ok guys here is the skinny i will have 8 sets available next week. Guys i want to be crystal clear in saying we made these mounts to try and help members with some fit issues and i will not guarantee fit on every application as there is no way to guarantee this when putting anything aftermarket on a classic vehicle. Also on that topic i will say that if you have a set of new tubular mounts and want to exchange them i will do that. (MUST BE NEW RESELLABLE CONDITION). Also guys over the years i collected some data on headers that seem to work well for customers and they are as follows.
Hedman 69646
Hedman 69096
Doug Thorley 3004

Guys the new sheet metal mounts are made with no room for improvements we got an additional 1 1/4" clearence.

Also i worked with Doug Thorley direct and they made headers for the LS motors that work with our tubulars and would might even work better with the sheet metal mounts. The part # is THY-323Y-C
Hope this info helps!!

The 2 hedman part numbers are for sbc, and I didn't find a Doug Thorley part number 3004.

What are the Hooker headers in those pictures you posted a while back?

[CPPJEFF]

Originally Posted by BigRed76

The 2 hedman part numbers are for sbc, and I didn't find a Doug Thorley part number 3004.

What are the Hooker headers in those pictures you posted a while back?

Those "THY" part numbers are the current Doug Thorley header numbers and the work really well.