Power Brake Booster Adapter Bracket - Page 8 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Captainfab** · 08-07-2013, 11:23 PM

I'll send you a PM.......

Quote:

Originally Posted by Red65C10

Captain- please send me your info. I need a booster bracket for my 65.

Thanks,
Posted via Mobile Device
Posted via Mobile Device

Red65C10 · 08-15-2013, 03:55 PM

Received my bracket today. Nice ! Pics coming once I get it mounted.

Thanks,

step65 · 08-18-2013, 11:29 AM

Hello Captainfab I also need a bracket for my 65. Please let me know how I can order one?
Posted via Mobile Device

**Captainfab** · 08-19-2013, 02:33 AM

I'll send you a PM with ordering info.

Quote:

Originally Posted by step65

Hello Captainfab I also need a bracket for my 65. Please let me know how I can order one?
Posted via Mobile Device

**Captainfab** · 08-29-2013, 12:05 AM

Here are a couple installed pics posted by member oldies1938 in another thread.

**Captainfab** · 08-29-2013, 01:28 AM

Here is a thread with some info and pics on one way to lengthen the booster pushrod.

http://www.67-72chevytrucks.com/vboa...d.php?t=564518

62chevy302 · 08-29-2013, 09:43 PM

Do you have a list of which boosters/ master cylinders fit?
Posted via Mobile Device

**Captainfab** · 08-29-2013, 11:26 PM

There are a few listed in post #1, but here is a little list.

'67-'70 pickups, Suburbans, Blazers
'70-'74 Impala, Caprice
'80's G body Vans (full sized)
Early Astro/Safari vans with the vacuum booster
'82-'02 S10/S15 pickups and Blazers
'88-'98 full sized pickups
'92-'98 Suburbans, Blazers

There may be some other applications, and/or years, but these are the ones I have been able to verify.

Quote:

Originally Posted by 62chevy302

Do you have a list of which boosters/ master cylinders fit?
Posted via Mobile Device

62chevy302 · 08-29-2013, 11:46 PM

If you use a 88-98 booster is there a non plastic master cylinder that will bolt up?
Posted via Mobile Device

JOHNORO · 08-29-2013, 11:55 PM

i will take one...

**Captainfab** · 08-30-2013, 01:21 AM

Yes. You can use a '73 and up master cylinder that is for the type of braking system that you have. IE: disc/drum or disc/disc.

Quote:

Originally Posted by 62chevy302

If you use a 88-98 booster is there a non plastic master cylinder that will bolt up?
Posted via Mobile Device

**Captainfab** · 08-30-2013, 01:23 AM

I will send you a PM with payment info

Quote:

Originally Posted by JOHNORO

i will take one...

62chevy302 · 08-31-2013, 09:11 AM

what booster/master cylinder was used on oldies1938 in the pics above?

**Captainfab** · 08-31-2013, 11:50 PM

That's just one of the aftermarket universal brake booster and master cylinder. The master cylinder looks to be one of the typical Corvette style masters.

Quote:

Originally Posted by 62chevy302

what booster/master cylinder was used on oldies1938 in the pics above?

62chevy302 · 09-01-2013, 06:35 PM

Quote:

Originally Posted by Captainfab

Yes. You can use a '73 and up master cylinder that is for the type of braking system that you have. IE: disc/drum or disc/disc.

So most master cylinder boosters interchange. Like a 98 booster with a 73 master?
Posted via Mobile Device

**Captainfab** · 09-01-2013, 11:45 PM

Yes that is correct. Pretty much all the GM brake masters and boosters from '73 and up will interchange.

Quote:

Originally Posted by 62chevy302

So most master cylinder boosters interchange. Like a 98 booster with a 73 master?
Posted via Mobile Device

**DPowers** · 09-02-2013, 12:18 AM

Bought one a couple of years ago- need another one. PM please.

**Captainfab** · 09-02-2013, 01:28 AM

PM sent

Quote:

Originally Posted by DPowers

Bought one a couple of years ago- need another one. PM please.

62chevy302 · 09-02-2013, 08:20 AM

how about the corvette style master cylinders and boosters do they fit your bracket

**Captainfab** · 09-02-2013, 11:09 PM

I have not been able to verify the fitment of the Corvette boosters with my bracket. I have heard that they have the correct stud pattern.

Quote:

Originally Posted by 62chevy302

how about the corvette style master cylinders and boosters do they fit your bracket

62chevy302 · 09-02-2013, 11:26 PM

I want to run a 78 front crossmember with stock rear drums. Is there a specific master cylinder/booster I need?
Posted via Mobile Device

**Captainfab** · 09-03-2013, 12:50 AM

Just run the '78 master cylinder and proportioning valve with which ever booster you want. The booster just has to be for a master cylinder with the shallow bore in the back of the piston. To be safe that would be '73 and up. So basically any of the boosters that are compatable with my booster bracket except for the '67-'70 booster.

Quote:

Originally Posted by 62chevy302

I want to run a 78 front crossmember with stock rear drums. Is there a specific master cylinder/booster I need?
Posted via Mobile Device

likaroc13 · 09-03-2013, 01:14 AM

Not the best pics, but I snapped these while visiting at my dad's:

**DPowers** · 09-03-2013, 11:10 PM

Quote:

Originally Posted by Captainfab

PM sent

PM replied- $$ on way.

**Captainfab** · 09-04-2013, 12:26 AM

Thanks for the pics Phillip

Quote:

Originally Posted by likaroc13

Not the best pics, but I snapped these while visiting at my dad's:

Payment received. I should get your booster bracket shipped tomorrow.

Quote:

Originally Posted by DPowers

PM replied- $$ on way.

08-15-2013, 03:55 PM	#177
Red65C10 Registered User Join Date: Mar 2011 Location: Cumming GA Posts: 202	Re: Power Brake Booster Adapter Bracket Received my bracket today. Nice ! Pics coming once I get it mounted. Thanks, __________________ Billy 65 C10 ............................... ____ ................ ________-\|___\____ .;.;;.:;:;.,;.\|__(O)___\|____/_(O)\| _______________________________ P.S. Send truck money !

08-18-2013, 11:29 AM	#178
step65 Registered User Join Date: Aug 2013 Location: Wildomar Ca Posts: 274	Re: Power Brake Booster Adapter Bracket Hello Captainfab I also need a bracket for my 65. Please let me know how I can order one? Posted via Mobile Device

08-29-2013, 12:05 AM	#180
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,246	Re: Power Brake Booster Adapter Bracket Here are a couple installed pics posted by member oldies1938 in another thread. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

08-29-2013, 01:28 AM	#181
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,246	Re: Power Brake Booster Adapter Bracket Here is a thread with some info and pics on one way to lengthen the booster pushrod. http://www.67-72chevytrucks.com/vboa...d.php?t=564518 __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

08-29-2013, 09:43 PM	#182
62chevy302 hillbilly Join Date: Apr 2007 Location: hampton,tn Posts: 459	Re: Power Brake Booster Adapter Bracket Do you have a list of which boosters/ master cylinders fit? Posted via Mobile Device __________________ -1962 C-10

08-29-2013, 11:46 PM	#184
62chevy302 hillbilly Join Date: Apr 2007 Location: hampton,tn Posts: 459	Re: Power Brake Booster Adapter Bracket If you use a 88-98 booster is there a non plastic master cylinder that will bolt up? Posted via Mobile Device __________________ -1962 C-10

08-29-2013, 11:55 PM	#185
JOHNORO oldschoolblazer@yahoo.com Join Date: Jun 2007 Location: Long Beach CA. Posts: 1,968	Re: Power Brake Booster Adapter Bracket i will take one...

08-31-2013, 09:11 AM	#188
62chevy302 hillbilly Join Date: Apr 2007 Location: hampton,tn Posts: 459	Re: Power Brake Booster Adapter Bracket what booster/master cylinder was used on oldies1938 in the pics above? __________________ -1962 C-10

09-02-2013, 12:18 AM	#192
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,422	Re: Power Brake Booster Adapter Bracket Bought one a couple of years ago- need another one. PM please. __________________ DP's 66 Build http://67-72chevytrucks.com/vboard/s...d.php?t=361556

09-02-2013, 08:20 AM	#194
62chevy302 hillbilly Join Date: Apr 2007 Location: hampton,tn Posts: 459	Re: Power Brake Booster Adapter Bracket how about the corvette style master cylinders and boosters do they fit your bracket __________________ -1962 C-10

09-02-2013, 11:26 PM	#196
62chevy302 hillbilly Join Date: Apr 2007 Location: hampton,tn Posts: 459	Re: Power Brake Booster Adapter Bracket I want to run a 78 front crossmember with stock rear drums. Is there a specific master cylinder/booster I need? Posted via Mobile Device __________________ -1962 C-10

09-03-2013, 01:14 AM	#198
likaroc13 Rollin' Old Skool Join Date: Jun 2007 Location: Hattiesburg, MS Posts: 5,371	Re: Power Brake Booster Adapter Bracket Not the best pics, but I snapped these while visiting at my dad's: Attached Images __________________ _____________________________________________ Phillip My Build threads: 1966 Chevy C-10 "Black Betty" shortbed, fleetside, BBW, 327 V8/ Powerglide (under construction) http://67-72chevytrucks.com/vboard/s...ighlight=betty 1997 Chevy Tahoe, 2dr/2wd, mild custom (Daily driver) http://67-72chevytrucks.com/vboard/s...d.php?t=601142 Pics: '66 C-10 https://flic.kr/s/aHsjHWD4h9 '97 Tahoe https://flic.kr/s/aHsjGZ7wKP '93 C-1500 https://flic.kr/s/aHskxdpdnQ '88 S-10 Blazer https://flic.kr/s/aHsjYGx4Md Previous Rides: 1993 Chevy S-10 ext. cab, 4.3L, 4/5 drop (Sold) 1993 Chevy C-1500 short/step Retro-Rod (Sold) 1988 S-10 Blazer 2dr/2wd mild custom (Sold)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.