OR Parting out 72 GMC K20 4x4 350-TH350

[MATT SHIELDS]

HI, I'm looking for a left side backing plate/ caliper bracket for a 72 k20. I would consider buying a pair if you don't want to split them up . Would you let me know if you have them and how much. I attached a pic of the style I have for the right side. Thanks for your help, Matt

[tll74]

pics for john@thepier, These parts all look fine and I would hot tank and acid dip them as well. I don't have a engine cross member priced in the beginning of this thread so it would be 85.00. If you wanted this stuff I would make this truck the next one I part out. Would you also be needing outer front bumper brackets, front spring bump stops, and LH spring stop? LMK Thanks, Tom

[tll74]

MATT SHIELDS Matt, I do have a pair of these. I'll look to see how they look. Thanks, Tom

[MATT SHIELDS]

Thanks Tom, let me know what you find and if you could send some pics that would be great. I appreciate your help. Matt

[john@thepier]

Sounds good to me Tom, I have my list.
1. 4x4 V-8 Engine cross member.........................85
2. 4x4 Trans/Transfer cross member....................65
3. 4x4 Front spring/core support brackets ...........70
4. 4x4 Frame shackle mnt. for rear of front spring..50
5. 4x4 Front spring shackles...............................?
6, 4x4 front shock mnts for frame.......................10
7. transfer case support mnt.............................45
8. Front bumper inner/outer brackets..................?


Tom you will have to fill in the blanks. Zip is 53147 Let me know when and how. John

[musclecarfreak]

Hey Tom, if you decide to cannibalize that 4 wheel drive next, keep me in mind! I still need an "intermediate" crossmember just ahead of the rear shock mounts, for my 72 long bed....to go with my other goodies I already got from you! Thanks in advance, Todd

[tll74]

bobvilla67, Front bump stops with brackets on 31.30 shipped.

John,
1. 4x4 V-8 Engine cross member.........................85
2. 4x4 Trans/Transfer cross member....................65
3. 4x4 Front spring/core support brackets ...........70
4. 4x4 Frame shackle mnt. for rear of front spring..50
5. 4x4 Front spring shackles...............................20.00?
6, 4x4 front shock mnts for frame.......................10
7. transfer case support mnt.............................45
8. Front bumper inner/outer brackets..................40.00 71-72 outers. I do not have the 70-down. Inners are the same as your 2wd
Not sure what shipping would be till packaged up. Probably about 75.00. How soon would you need these?

Todd, your up for this when I get it out. I haven't forgotten

Thanks, Tom

[bobvilla67]

I'll take them. Pm sent

[tll74]

musclecarfreak Todd, I have the cross member removed. Still up for it?

john@thepier John, I have some of the parts removed and will get the rest of them done Monday night. Did you want these acid dipped?

b.sharp. Here is your pic of the shock mount.


Thanks, Tom

[CUSTOM/10]

Hey Tom,

I'm looking for the 4x4 steering stabilizer shock mount that clamps to the
ti-rod like in the pictures on post 146. Is this one available or do you have any others ?

Gary

[kwmech]

I didn't read through 8 pages but, is there a steering box reinforcing plate on the inside of the rail? If so, how much

[tll74]

Originally Posted by b.sharp

Tom,
Does that bolt go all the way through the frame? My '64 shock bolt goes all the way through the frame and looks to be a 3/4" bolt if not bigger. Just curious, it looks like it would work. I haven't looked at the frame in a while. It's at my in0laws.

No it doesn't. The stud is welded to the bracket.

Originally Posted by CUSTOM/10

Hey Tom,

I'm looking for the 4x4 steering stabilizer shock mount that clamps to the
ti-rod like in the pictures on post 146. Is this one available or do you have any others ?

Gary

Gary, Sure 25.00 shipped.

Originally Posted by kwmech

I didn't read through 8 pages but, is there a steering box reinforcing plate on the inside of the rail? If so, how much

No it doesn't.

Thanks, Tom

[CUSTOM/10]

OK Tom I'll take it, shoot me a pm with paypal info.

Gary

Originally Posted by CUSTOM/10
Hey Tom,

I'm looking for the 4x4 steering stabilizer shock mount that clamps to the
ti-rod like in the pictures on post 146. Is this one available or do you have any others ?

Gary

Gary, Sure 25.00 shipped.

[john@thepier]

Cancel the bumper brackets I'll take 1-7 then since I will be putting a 68 front end on this. I am in no hurry when you get to it is fine with me. Also I would prefer no slips with the torch, I can finish removing rivets to insure no extra cuts or torch damage. John

[VDB]

Would you happen to have another front leaf spring front mount? Going on a 68 K10
Thx!

[b.sharp]

Please let me know if you find the other pair of rear frame shock mounts. I need a set for my '64 K20. Thank you.

[tll74]

Originally Posted by bobvilla67

I'll take them. Pm sent

PM returned.

Originally Posted by john@thepier

Cancel the bumper brackets I'll take 1-7 then since I will be putting a 68 front end on this. I am in no hurry when you get to it is fine with me. Also I would prefer no slips with the torch, I can finish removing rivets to insure no extra cuts or torch damage. John

John, Ok..I'll do this truck next. It will be a week or so before I start. Don't worry I cut the rivets off the opposite side.

Originally Posted by VDB

Would you happen to have another front leaf spring front mount? Going on a 68 K10
Thx!

I don't have any 68 mounts. They are different from the 69-72.

Originally Posted by b.sharp

Please let me know if you find the other pair of rear frame shock mounts. I need a set for my '64 K20. Thank you.

The mounts on the next one I part out (71 K20) are available.

Thanks, Tom

[b.sharp]

please let me know and could you send a close up picture to cbmcad99@yahoo.com.
Thank you, I believe they are the same as mine but with a close up I could tell for sure.

[tll74]

pics for Randy.

[tll74]

Originally Posted by b.sharp

please let me know and could you send a close up picture to cbmcad99@yahoo.com.
Thank you, I believe they are the same as mine but with a close up I could tell for sure.

I'll get a pic once I get it in the shop. Thanks, Tom

[1972K20]

In case I didn't see it listed, do you have the locking hubs for the front axle?

[tll74]

Originally Posted by 1972K20

In case I didn't see it listed, do you have the locking hubs for the front axle?

Sorry no K20 locking hubs right now. They were robbed before I got the truck. Thanks, Tom

[MATT SHIELDS]

Tom, did you have a chance to look at those backing plates yet? Thanks for your help, Matt

[tll74]

Originally Posted by MATT SHIELDS

Tom, did you have a chance to look at those backing plates yet? Thanks for your help, Matt

Darn it...I totally spaced it. I do have them and they are off. I'll for sure get it done tomorrow. Thanks, Tom

[Rebo123]

I'm interested in the pair of rear/rear spring hangers. How much shipped to 15377 Pa. If you still have them. It's for my 72 K10 4x4. Thanks