CA 1971 GMC BB Complete Part Out - Page 9 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

budnikguy · 04-18-2014, 10:41 PM

I believe I still have it...I will check and confirm for you, if you still need it

Quote:

Originally Posted by REEDS 72

Hi how about the fuel line from the pump to the carb do you still have it?

budnikguy · 04-18-2014, 10:43 PM

leaf spring rear end...although I do have a trailing arm 3/4 ton rear end also...

Quote:

Originally Posted by c20pickup

also, the rear axle, is that lef spring of trailing amrs?

budnikguy · 04-18-2014, 10:45 PM

I have all of it....lmk if you still are needing.

Quote:

Originally Posted by wgeyer88

What is left of the A/C system in the engine compartment? I'm looking for an evaporator, condenser and everything in between except for the compressor.

thanks

budnikguy · 04-18-2014, 10:49 PM

This cab is pretty ok....have better and have worse...

Quote:

Originally Posted by VDOG

What does that cab look like, rockers, floor, etc etc.

71Longbed · 04-19-2014, 01:55 AM

im loooking for a good cab and tittle i pmed you

Motoxrrar · 04-19-2014, 04:50 AM

Grill ? And bezels ? Eyebrows? In good shape? Dings?

**Dave** · 04-19-2014, 09:01 AM

Quote:

Originally Posted by budnikguy

Sorry ;lost track of this...here are pics.

Adam,
If you could give me a price shipped on the e-brake guide brkts and the air cleaner base, I don't need the lid, just the base. LMK, if you need a zip code to quote, thanks Dave.

DCTIRES · 04-25-2014, 12:13 AM

Looking for the high hump transmission tunnel to 59484
thanks
-christian

**70STOVEBOLT** · 04-29-2014, 01:18 PM

Adam, do you have the exhaust downpipes from the big block? I am trying to do a budge big block build and need the pipes that attach to the manifolds. They can be cut off after the bends.

Thanks,
Mark

hondamann · 07-13-2014, 09:43 PM

If the Engine stands are still Available I will take them. I'm in bad need of them.

hillbilly_deluxe · 07-13-2014, 10:02 PM

Shape of the top bar and eyebrows for the grille ?
Thanks kyle

TrkEnvy · 07-13-2014, 10:53 PM

I need frame horns, both of them sawzalled off behind the core support mounts if you have a decent set on your frame(if you still have the frame). The PO trashed mine in a front collision.. if you are willing to cut them off and mail them id appreciate it greatly.. price shipped to Vegas, 89131. Thanks!
Brock

67-4x4 · 07-17-2014, 08:28 AM

Do you happen to have a 3 groove big block crank pulley ?

budnikguy · 07-22-2014, 05:58 PM

Sold the one's in this port, but I believe I have another pair...lmk if you still need

Quote:

Originally Posted by hondamann

If the Engine stands are still Available I will take them. I'm in bad need of them.

budnikguy · 07-22-2014, 05:58 PM

Sorry already gone....

Quote:

Originally Posted by hillbilly_deluxe

Shape of the top bar and eyebrows for the grille ?
Thanks kyle

budnikguy · 07-22-2014, 05:59 PM

I can definitely help you with the cuts, would like detailed p[ics and measurements....shipping might be tough due to weight.

lmk
Adam

Quote:

Originally Posted by TrkEnvy

I need frame horns, both of them sawzalled off behind the core support mounts if you have a decent set on your frame(if you still have the frame). The PO trashed mine in a front collision.. if you are willing to cut them off and mail them id appreciate it greatly.. price shipped to Vegas, 89131. Thanks!
Brock

budnikguy · 07-22-2014, 07:57 PM

Sure do...LMK

Quote:

Originally Posted by 67-4x4

Do you happen to have a 3 groove big block crank pulley ?

Ozzy2013 · 07-23-2014, 05:34 AM

Is the 3 groove pull still available?Looking for a high hump trans cover too.Thanks Oz

budnikguy · 07-23-2014, 04:42 PM

Still available, lets give other member a chance to respond first...the only high hump I have currently is for a manual trans.

Quote:

Originally Posted by Ozzy2013

Is the 3 groove pull still available?Looking for a high hump trans cover too.Thanks Oz

birdman8711 · 07-24-2014, 04:37 PM

How much for the grille, headlights, headlight bezels, and headlight buckets

Ozzy2013 · 07-26-2014, 12:15 AM

i need a high hump for a manual.Mine is a 3 on the tree so i need the high hump for my nv4500

OldCrLvr · 08-18-2014, 02:00 AM

Do you happen to have any lower trim clips laying around? I'm trying to avoid paying for new ones and am on a time cruntch before a car show.

04-19-2014, 01:55 AM	#205
71Longbed Not Mine But A beauty Join Date: Aug 2004 Location: Southern CaL Posts: 368	Re: 1971 GMC BB Complete Part Out im loooking for a good cab and tittle i pmed you __________________ 68 Chevy Shortbed 454/400 2000 Chevrolet Camaro SS 6spd 2011 Silverado 5.3 6spd auto

04-19-2014, 04:50 AM	#206
Motoxrrar Registered User Join Date: Feb 2014 Location: Tennessee Posts: 282	Re: 1971 GMC BB Complete Part Out Grill ? And bezels ? Eyebrows? In good shape? Dings?

04-25-2014, 12:13 AM	#208
DCTIRES Registered User Join Date: Jan 2014 Location: High river alberta Posts: 1	Re: 1971 GMC BB Complete Part Out Looking for the high hump transmission tunnel to 59484 thanks -christian

04-29-2014, 01:18 PM	#209
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,233	Re: 1971 GMC BB Complete Part Out Adam, do you have the exhaust downpipes from the big block? I am trying to do a budge big block build and need the pipes that attach to the manifolds. They can be cut off after the bends. Thanks, Mark __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

07-13-2014, 09:43 PM	#210
hondamann Registered User Join Date: Nov 2013 Location: Ruston La Posts: 20	Re: 1971 GMC BB Complete Part Out If the Engine stands are still Available I will take them. I'm in bad need of them.

07-13-2014, 10:02 PM	#211
hillbilly_deluxe Registered User Join Date: Dec 2011 Location: pittstown nj Posts: 103	Re: 1971 GMC BB Complete Part Out Shape of the top bar and eyebrows for the grille ? Thanks kyle

07-13-2014, 10:53 PM	#212
TrkEnvy Registered User Join Date: Apr 2011 Location: Las Vegas, NV Posts: 264	Re: 1971 GMC BB Complete Part Out I need frame horns, both of them sawzalled off behind the core support mounts if you have a decent set on your frame(if you still have the frame). The PO trashed mine in a front collision.. if you are willing to cut them off and mail them id appreciate it greatly.. price shipped to Vegas, 89131. Thanks! Brock __________________ 1971 C10 - LWB shortened to SWB, welded in my C notch, reinforced trailing arms with 3/16 plate, new cpp 5" rear drop springs, 2" drop blocks, ece super panhard kit. Cpp drop spindles, 2 inch front springs, 5.3/4L80E I call it Bruce Banner..

07-17-2014, 08:28 AM	#213
67-4x4 Registered User Join Date: Sep 2012 Location: moon twp pa Posts: 187	Re: 1971 GMC BB Complete Part Out Do you happen to have a 3 groove big block crank pulley ?

07-23-2014, 05:34 AM	#218
Ozzy2013 Registered User Join Date: Oct 2013 Location: Elkton Posts: 693	Re: 1971 GMC BB Complete Part Out Is the 3 groove pull still available?Looking for a high hump trans cover too.Thanks Oz

07-24-2014, 04:37 PM	#220
birdman8711 Registered User Join Date: Nov 2012 Location: abingdon, Il Posts: 29	Re: 1971 GMC BB Complete Part Out How much for the grille, headlights, headlight bezels, and headlight buckets

07-26-2014, 12:15 AM	#221
Ozzy2013 Registered User Join Date: Oct 2013 Location: Elkton Posts: 693	Re: 1971 GMC BB Complete Part Out i need a high hump for a manual.Mine is a 3 on the tree so i need the high hump for my nv4500

08-18-2014, 02:00 AM	#222
OldCrLvr Registered User Join Date: Nov 2006 Location: Ophir, CA Posts: 39	Re: 1971 GMC BB Complete Part Out Do you happen to have any lower trim clips laying around? I'm trying to avoid paying for new ones and am on a time cruntch before a car show. __________________ 63 NovaSS 70 Custom/10 LWB 71 Malibu 00 Z71 ECSB



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.