The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Suspension

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 08-20-2015, 04:04 PM   #1
Hart_Rod
*************
 
Hart_Rod's Avatar
 
Join Date: Apr 2005
Location: Pensacola, FL
Posts: 17,856
Lightbulb Bolt on hood brackets for Porterbuilt hood hinges.

HartRod Hood Brackets!


When I started getting ready to install my Porterbuilt dropmember hood hinges, I decided I didn't want to weld the provided hood brackets to my painted hood. I also looking for a way to have some side to side adjustment to allow for better alignment of the hood between the fenders if needed. So I spent some time trying to figure out a feasible way to accomplish this. After some trial and error, I finally came up with design that would bolt directly to the hood, requiring no welding. My brackets use the 2 factory hinge mounting points along with 4 - 3/8" nutserts installed in the hood brace. The Porterbuilt hood hinges attach directly to the mounted hood brackets. It's a very simple and clean installation. Let me know if you any specific questions or are interested in a set of the brackets. I'm offering the first batch at $200 shipped via USPS (CONUS only). Just paypal robhartley@aol.com and include "Hood Brackets" in the message.

Rob

P.S. Below is a great step by step thread written by boardmember Rockcrwln that shows you how to install your PBFab hood hinges. When you get to the step that shows you how to weld on the hood mount, you would continue you the installation process with with HartRod hood brackets!

http://67-72chevytrucks.com/vboard/s...+hinge+install
Attached Images
     

Last edited by Hart_Rod; 01-28-2016 at 01:48 PM.
Hart_Rod is offline   Reply With Quote
Old 08-20-2015, 06:09 PM   #2
Gonepostal
Registered User
 
Gonepostal's Avatar
 
Join Date: Jun 2012
Location: Mobile Al
Posts: 103
Re: Bolt on hood brackets for Porterbuilt hood hinges.

Nice work
__________________
US Army Bomb Squad 83-96
There is no problem that a suitable amount of explosives cannot solve
Gonepostal is offline   Reply With Quote
Old 08-20-2015, 06:54 PM   #3
greystoke
Registered User
 
Join Date: Jul 2008
Location: Buckeye, Arizona
Posts: 694
Re: Bolt on hood brackets for Porterbuilt hood hinges.

did it change the cowl to hood alignment?
__________________
"Fear makes the wolf look bigger"

http://67-72chevytrucks.com/vboard/s...d.php?t=305629
greystoke is offline   Reply With Quote
Old 08-20-2015, 07:13 PM   #4
Hart_Rod
*************
 
Hart_Rod's Avatar
 
Join Date: Apr 2005
Location: Pensacola, FL
Posts: 17,856
Re: Bolt on hood brackets for Porterbuilt hood hinges.

Quote:
Originally Posted by Gonepostal View Post
Nice work
Thanks!

Quote:
Originally Posted by greystoke View Post
did it change the cowl to hood alignment?
Absolutely not!!!
Hart_Rod is offline   Reply With Quote
Old 08-20-2015, 08:02 PM   #5
Hart_Rod
*************
 
Hart_Rod's Avatar
 
Join Date: Apr 2005
Location: Pensacola, FL
Posts: 17,856
Re: Bolt on hood brackets for Porterbuilt hood hinges.

Here are some more pictures. I have a lot more on my Instagram, Hart_rod_chubtubz.
Attached Images
     
Hart_Rod is offline   Reply With Quote
Old 08-21-2015, 03:17 AM   #6
andrewmp6
Registered User
 
Join Date: Jan 2009
Location: Louisville,Ky
Posts: 5,811
Re: Bolt on hood brackets for Porterbuilt hood hinges.

So you could run a fiberglass hood with these?
andrewmp6 is offline   Reply With Quote
Old 08-21-2015, 06:18 AM   #7
Coursey
Registered User
 
Coursey's Avatar
 
Join Date: Aug 2013
Location: Kentucky
Posts: 550
Re: Bolt on hood brackets for Porterbuilt hood hinges.

Nice! Keep coming out with innovative products!
Coursey is offline   Reply With Quote
Old 08-21-2015, 07:40 AM   #8
Hart_Rod
*************
 
Hart_Rod's Avatar
 
Join Date: Apr 2005
Location: Pensacola, FL
Posts: 17,856
Re: Bolt on hood brackets for Porterbuilt hood hinges.

Quote:
Originally Posted by Coursey View Post
Nice! Keep coming out with innovative products!
Thanks Wesley!

Quote:
Originally Posted by andrewmp6 View Post
So you could run a fiberglass hood with these?
I would think you would have no problem as these brackets helps spread the load over 12 points instead of 4 like the original. You would just have to make sure you secured the nutserts in the fiberglass. Let me know.
Hart_Rod is offline   Reply With Quote
Old 08-21-2015, 11:29 AM   #9
gringoloco
A guy with a truck
 
gringoloco's Avatar
 
Join Date: Sep 2005
Location: Germany, for now
Posts: 5,921
Re: Bolt on hood brackets for Porterbuilt hood hinges.

I like the radiused corners and better flowing lines of the production version. Nice work!
__________________
-Chris

Instagram _elgringoloco_

'70 Short-Wide How to: Ruin a perfectly good C10
‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd
'72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD)
'72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD)
'05 Yukon Daily Driven (not so stock) Yukon (SOLD)
‘07 Yukon Denali (daily)

Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy
gringoloco is offline   Reply With Quote
Old 08-21-2015, 12:01 PM   #10
Hart_Rod
*************
 
Hart_Rod's Avatar
 
Join Date: Apr 2005
Location: Pensacola, FL
Posts: 17,856
Re: Bolt on hood brackets for Porterbuilt hood hinges.

Quote:
Originally Posted by gringoloco View Post
I like the radiused corners and better flowing lines of the production version. Nice work!
Thanks Chris! I'm trying to make it something people will be proud to run on their trucks.
Hart_Rod is offline   Reply With Quote
Old 08-21-2015, 01:27 PM   #11
gringoloco
A guy with a truck
 
gringoloco's Avatar
 
Join Date: Sep 2005
Location: Germany, for now
Posts: 5,921
Re: Bolt on hood brackets for Porterbuilt hood hinges.

I'd be proud! Man, I sure hope this stuff is still around when I get back to the 'states and have a place to work on trucks again...
__________________
-Chris

Instagram _elgringoloco_

'70 Short-Wide How to: Ruin a perfectly good C10
‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd
'72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD)
'72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD)
'05 Yukon Daily Driven (not so stock) Yukon (SOLD)
‘07 Yukon Denali (daily)

Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy
gringoloco is offline   Reply With Quote
Old 08-22-2015, 03:36 AM   #12
andrewmp6
Registered User
 
Join Date: Jan 2009
Location: Louisville,Ky
Posts: 5,811
Re: Bolt on hood brackets for Porterbuilt hood hinges.

I don't have one of these trucks but those could give people more options on hoods or help those who can't weld.
andrewmp6 is offline   Reply With Quote
Old 08-28-2015, 02:28 PM   #13
Hart_Rod
*************
 
Hart_Rod's Avatar
 
Join Date: Apr 2005
Location: Pensacola, FL
Posts: 17,856
Re: Bolt on hood brackets for Porterbuilt hood hinges.

Quote:
Originally Posted by gringoloco View Post
I'd be proud! Man, I sure hope this stuff is still around when I get back to the 'states and have a place to work on trucks again...
Thanks! Just let me know.
Quote:
Originally Posted by andrewmp6 View Post
I don't have one of these trucks but those could give people more options on hoods or help those who can't weld.
Thanks!
Hart_Rod is offline   Reply With Quote
Old 09-14-2015, 09:19 PM   #14
Hart_Rod
*************
 
Hart_Rod's Avatar
 
Join Date: Apr 2005
Location: Pensacola, FL
Posts: 17,856
Re: Bolt on hood brackets for Porterbuilt hood hinges.

bump
Hart_Rod is offline   Reply With Quote
Old 09-17-2015, 08:43 PM   #15
Longhornss
Registered User
 
Join Date: Mar 2015
Location: Windsor,Ontario Canada
Posts: 255
Re: Bolt on hood brackets for Porterbuilt hood hinges.

Hey this is a great idea. Your original post says you wanted a way to have some side to side adjustment. This is my concern with these hinges. But I am not seeing how you accomplish the side to side movement. I must be missing something.
Longhornss is offline   Reply With Quote
Old 09-18-2015, 08:13 AM   #16
Hart_Rod
*************
 
Hart_Rod's Avatar
 
Join Date: Apr 2005
Location: Pensacola, FL
Posts: 17,856
Re: Bolt on hood brackets for Porterbuilt hood hinges.

Quote:
Originally Posted by Longhornss View Post
Hey this is a great idea. Your original post says you wanted a way to have some side to side adjustment. This is my concern with these hinges. But I am not seeing how you accomplish the side to side movement. I must be missing something.
The mounting holes can be slotted to give you some side to side movement.
Hart_Rod is offline   Reply With Quote
Old 10-14-2015, 09:07 AM   #17
Hart_Rod
*************
 
Hart_Rod's Avatar
 
Join Date: Apr 2005
Location: Pensacola, FL
Posts: 17,856
Re: Bolt on hood brackets for Porterbuilt hood hinges.

Installed pictures from a happy customer!
Attached Images
 
Hart_Rod is offline   Reply With Quote
Old 10-14-2015, 12:14 PM   #18
Coursey
Registered User
 
Coursey's Avatar
 
Join Date: Aug 2013
Location: Kentucky
Posts: 550
Re: Bolt on hood brackets for Porterbuilt hood hinges.

Any thoughts of doing this for other year models? 60-66? 73-87?
Coursey is offline   Reply With Quote
Old 10-14-2015, 12:28 PM   #19
Hart_Rod
*************
 
Hart_Rod's Avatar
 
Join Date: Apr 2005
Location: Pensacola, FL
Posts: 17,856
Re: Bolt on hood brackets for Porterbuilt hood hinges.

Quote:
Originally Posted by Coursey View Post
Any thoughts of doing this for other year models? 60-66? 73-87?
Not at the moment. I can't keep up with what I currently have going on.....
Hart_Rod is offline   Reply With Quote
Old 10-30-2015, 11:04 AM   #20
Hart_Rod
*************
 
Hart_Rod's Avatar
 
Join Date: Apr 2005
Location: Pensacola, FL
Posts: 17,856
Re: Bolt on hood brackets for Porterbuilt hood hinges.

Bump!
Hart_Rod is offline   Reply With Quote
Old 11-04-2015, 07:14 PM   #21
19SIKtySix
Registered User
 
19SIKtySix's Avatar
 
Join Date: Oct 2012
Location: Fresno, CA
Posts: 119
Re: Bolt on hood brackets for Porterbuilt hood hinges.

Quote:
Originally Posted by Coursey View Post
Any thoughts of doing this for other year models? 60-66? 73-87?
I second this thought...poor 60-66 trucks are always forgotten. Keep us posted if you decide to make them available.
__________________
Chuck

Instagram: c_lo_garage

Check out my 1966 C10 project "El Viejito" here:
http://67-72chevytrucks.com/vboard/s...d.php?t=674614
19SIKtySix is offline   Reply With Quote
Old 11-05-2015, 11:37 AM   #22
Hart_Rod
*************
 
Hart_Rod's Avatar
 
Join Date: Apr 2005
Location: Pensacola, FL
Posts: 17,856
Re: Bolt on hood brackets for Porterbuilt hood hinges.

Quote:
Originally Posted by 19SIKtySix View Post
I second this thought...poor 60-66 trucks are always forgotten. Keep us posted if you decide to make them available.
Will do!
Hart_Rod is offline   Reply With Quote
Old 11-30-2015, 10:09 AM   #23
Hart_Rod
*************
 
Hart_Rod's Avatar
 
Join Date: Apr 2005
Location: Pensacola, FL
Posts: 17,856
Re: Bolt on hood brackets for Porterbuilt hood hinges.

bUMP!
Hart_Rod is offline   Reply With Quote
Old 12-11-2015, 01:10 PM   #24
Hart_Rod
*************
 
Hart_Rod's Avatar
 
Join Date: Apr 2005
Location: Pensacola, FL
Posts: 17,856
Re: Bolt on hood brackets for Porterbuilt hood hinges.

bump!
Hart_Rod is offline   Reply With Quote
Old 12-13-2015, 10:58 PM   #25
texastrendz
Registered User
 
Join Date: Jan 2008
Location: HOUSTON TX
Posts: 1,161
Re: Bolt on hood brackets for Porterbuilt hood hinges.

Can you give me a paypal. I want a set Of these.
texastrendz is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:15 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com