'62 GMC BurbMaster "Rust"oration, Patina Build..... - Page 17 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**ChiefRocka** · 10-14-2015, 09:29 AM

I moved on to the fuel tank mount.

I want the tank to 'locate' off of chassis, rather than the body (as the Roadmaster was)

Location was marked, and a crossmember out of 2x2 was cut to length

-
-

**ChiefRocka** · 10-14-2015, 09:32 AM

-
-

**ChiefRocka** · 10-14-2015, 09:42 AM

-
-

FetchMeAPepsi · 10-14-2015, 09:43 AM

Somehow I lost my sub to this thread. Re-subscribed!

**ChiefRocka** · 10-14-2015, 09:53 AM

-
-

**ChiefRocka** · 10-14-2015, 10:07 AM

-
-

aggie91 · 10-14-2015, 11:40 AM

Nice work!

**Advanced Design** · 10-14-2015, 12:54 PM

Good to see the updates John. Man, you run some nice beads!

likaroc13 · 10-14-2015, 02:18 PM

Quote:

Originally Posted by aggie91

Nice work!

x2!

**ChiefRocka** · 10-14-2015, 06:20 PM

Thanks guys !

**ChiefRocka** · 10-15-2015, 09:21 AM

The next step was to lift body again, and begin cut out of floor pan, and begin rust repair .....

-
-

**ChiefRocka** · 10-15-2015, 09:29 AM

The following are some pics of the floor cutout of Burb 1. A good portion of this floor was still in good shape, so I will be using most of it in my Burb 2 ...

-
-

-
-

-
-

**ChiefRocka** · 01-10-2016, 10:36 AM

Happy New Year Everyone !!

My shop has been taking a lot of my time, as we are extremely busy, which is a good thing.

I don't have too many update pics, just a few old ones I found of Burb #1 shell....

-
-

Since these pics were taking, I sat on the roof skin sat at my pad for a while, then I ended up donating it for the cause ....

**ChiefRocka** · 01-14-2016, 01:04 AM

Here are some more update pics from a few months ago ...

My daughter helped out a bit with some blasting, in pajamas of course

-
-

-
-
Back to removing the remainder of the rockers ...
-
-

-
-

**ChiefRocka** · 01-14-2016, 10:07 AM

The plan was to get the rockers and floor braces removed, before it goes over to sandblast and powder.

Continued ....
-
-

-
-

**ChiefRocka** · 01-14-2016, 10:12 AM

The powder coater needed his Rotisserie back for a couple months, so it sat on rollers for a while....

Girlfriend learning how to 'carefully' remove trim

-
-

**ChiefRocka** · 01-14-2016, 10:27 AM

These braces were added to locate the floor supports. The supports will be reinstalled after sandblasting...

-
-

**ChiefRocka** · 01-14-2016, 10:36 AM

-
-

Rusty !!!

-
-

reaper71 · 01-14-2016, 10:42 AM

She's a crusty old girl!
Nice to see you saving it!!

Mark...

**ChiefRocka** · 01-14-2016, 10:46 AM

Quote:

Originally Posted by reaper71

She's a crusty old girl!
Nice to see you saving it!!

Mark...

Thanks Mark ...

Keep me outta trouble, for sure

likaroc13 · 01-14-2016, 12:07 PM

Good to see the loved ones getting involved as well!

**Advanced Design** · 01-14-2016, 07:22 PM

Always cool to have the family involved in saving one. Appreciate the updates Chief.

jonzcustomshop · 01-15-2016, 09:08 PM

have you figured out the shift detent yet? I see like mine, yours has 5 shift positions, and for a th 350 we need 6, and a 700/200 r4 we need 7.....
my auto column was a powerslide...
looks like yours is a hydromatic?

**ChiefRocka** · 01-22-2016, 10:17 PM

Quote:

Originally Posted by jonzcustomshop

have you figured out the shift detent yet? I see like mine, yours has 5 shift positions, and for a th 350 we need 6, and a 700/200 r4 we need 7.....
my auto column was a powerslide...
looks like yours is a hydromatic?

All I ended up doing was trim a little off of the actual steering column tube ... To allow more travel.

The magic comes from the adjustability of the Lokar linkage that allows throw ratio adjustments.

Work really well actually

**ChiefRocka** · 01-22-2016, 10:29 PM

A few more updates ....

-
-

-
-
Test fitting the China Crap ...
-
-

-
-

10-14-2015, 09:29 AM	#401
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: '62 GMC BurbMaster "Rust"oration, Patina Build..... I moved on to the fuel tank mount. I want the tank to 'locate' off of chassis, rather than the body (as the Roadmaster was) Location was marked, and a crossmember out of 2x2 was cut to length - - - - - - __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

10-14-2015, 09:32 AM	#402
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: '62 GMC BurbMaster "Rust"oration, Patina Build..... - - - - - - - - __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

10-14-2015, 09:42 AM	#403
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: '62 GMC BurbMaster "Rust"oration, Patina Build..... - - - - - - - - - - - - - - - - __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

10-14-2015, 09:43 AM	#404
FetchMeAPepsi Registered User Join Date: Apr 2011 Location: Edmond, Ks Posts: 595	Re: '62 GMC BurbMaster "Rust"oration, Patina Build..... Somehow I lost my sub to this thread. Re-subscribed! __________________ Step by steps: Remove primer to reveal original paint Rebuild a carburetor See My Build - Cecilia! Some people are like slinkys. Not worth much but funny as heck when pushed down stairs.

10-14-2015, 09:53 AM	#405
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: '62 GMC BurbMaster "Rust"oration, Patina Build..... - - - - - - - - __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

10-14-2015, 10:07 AM	#406
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: '62 GMC BurbMaster "Rust"oration, Patina Build..... - - __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

10-14-2015, 11:40 AM	#407
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: '62 GMC BurbMaster "Rust"oration, Patina Build..... Nice work! __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square

10-14-2015, 12:54 PM	#408
Advanced Design Senior Member Join Date: Jul 2012 Location: Oblong, Illinois Posts: 7,028	Re: '62 GMC BurbMaster "Rust"oration, Patina Build..... Good to see the updates John. Man, you run some nice beads! __________________ Doug Advanced Design’s 1977 Blazer Build Advanced Design's '48 'Burb Build Mrs Advanced Design's '72 Suburban Advanced Design's 56 BelAir LS swap

10-14-2015, 06:20 PM	#410
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: '62 GMC BurbMaster "Rust"oration, Patina Build..... Thanks guys ! __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

10-15-2015, 09:21 AM	#411
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: '62 GMC BurbMaster "Rust"oration, Patina Build..... The next step was to lift body again, and begin cut out of floor pan, and begin rust repair ..... - - - - - - - - - - - - - - - - - - __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

10-15-2015, 09:29 AM	#412
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: '62 GMC BurbMaster "Rust"oration, Patina Build..... The following are some pics of the floor cutout of Burb 1. A good portion of this floor was still in good shape, so I will be using most of it in my Burb 2 ... - - - - - - - - - - __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!" Last edited by ChiefRocka; 10-15-2015 at 09:35 AM.

01-10-2016, 10:36 AM	#413
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: '62 GMC BurbMaster "Rust"oration, Patina Build..... Happy New Year Everyone !! My shop has been taking a lot of my time, as we are extremely busy, which is a good thing. I don't have too many update pics, just a few old ones I found of Burb #1 shell.... - - - - - - - - Since these pics were taking, I sat on the roof skin sat at my pad for a while, then I ended up donating it for the cause .... __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

01-14-2016, 01:04 AM	#414
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: '62 GMC BurbMaster "Rust"oration, Patina Build..... Here are some more update pics from a few months ago ... My daughter helped out a bit with some blasting, in pajamas of course - - - - - - Back to removing the remainder of the rockers ... - - - - __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

01-14-2016, 10:07 AM	#415
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: '62 GMC BurbMaster "Rust"oration, Patina Build..... The plan was to get the rockers and floor braces removed, before it goes over to sandblast and powder. Continued .... - - - - - - - - - - __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

01-14-2016, 10:12 AM	#416
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: '62 GMC BurbMaster "Rust"oration, Patina Build..... The powder coater needed his Rotisserie back for a couple months, so it sat on rollers for a while.... Girlfriend learning how to 'carefully' remove trim - - - - - - - - __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"



Register or Log In To remove these advertisements.

01-14-2016, 10:27 AM	#417
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: '62 GMC BurbMaster "Rust"oration, Patina Build..... These braces were added to locate the floor supports. The supports will be reinstalled after sandblasting... - - - - - - - - - - __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

01-14-2016, 10:36 AM	#418
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: '62 GMC BurbMaster "Rust"oration, Patina Build..... - - Rusty !!! - - - - - - __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

01-14-2016, 10:42 AM	#419
reaper71 Registered User Join Date: Nov 2011 Location: West Plains Missouri Posts: 2,088	Re: '62 GMC BurbMaster "Rust"oration, Patina Build..... She's a crusty old girl! Nice to see you saving it!! Mark... __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=645774 Project Orangepeel 52 A.D. http://67-72chevytrucks.com/vboard/s...d.php?t=653337 John's LS 49 dodge http://67-72chevytrucks.com/vboard/s...d.php?t=655780 Blake's 67 GMC LS stepside http://67-72chevytrucks.com/vboard/s...d.php?t=690527 Reed 78 FJ40 Rebuild http://67-72chevytrucks.com/vboard/s...d.php?t=733259 Barger's 78 FJ40

01-14-2016, 12:07 PM	#421
likaroc13 Rollin' Old Skool Join Date: Jun 2007 Location: Hattiesburg, MS Posts: 5,371	Re: '62 GMC BurbMaster "Rust"oration, Patina Build..... Good to see the loved ones getting involved as well! __________________ _____________________________________________ Phillip My Build threads: 1966 Chevy C-10 "Black Betty" shortbed, fleetside, BBW, 327 V8/ Powerglide (under construction) http://67-72chevytrucks.com/vboard/s...ighlight=betty 1997 Chevy Tahoe, 2dr/2wd, mild custom (Daily driver) http://67-72chevytrucks.com/vboard/s...d.php?t=601142 Pics: '66 C-10 https://flic.kr/s/aHsjHWD4h9 '97 Tahoe https://flic.kr/s/aHsjGZ7wKP '93 C-1500 https://flic.kr/s/aHskxdpdnQ '88 S-10 Blazer https://flic.kr/s/aHsjYGx4Md Previous Rides: 1993 Chevy S-10 ext. cab, 4.3L, 4/5 drop (Sold) 1993 Chevy C-1500 short/step Retro-Rod (Sold) 1988 S-10 Blazer 2dr/2wd mild custom (Sold)

01-14-2016, 07:22 PM	#422
Advanced Design Senior Member Join Date: Jul 2012 Location: Oblong, Illinois Posts: 7,028	Re: '62 GMC BurbMaster "Rust"oration, Patina Build..... Always cool to have the family involved in saving one. Appreciate the updates Chief. __________________ Doug Advanced Design’s 1977 Blazer Build Advanced Design's '48 'Burb Build Mrs Advanced Design's '72 Suburban Advanced Design's 56 BelAir LS swap

01-15-2016, 09:08 PM	#423
jonzcustomshop 1961 crewcab Join Date: Dec 2007 Location: missoula, mt Posts: 6,164	Re: '62 GMC BurbMaster "Rust"oration, Patina Build..... have you figured out the shift detent yet? I see like mine, yours has 5 shift positions, and for a th 350 we need 6, and a 700/200 r4 we need 7..... my auto column was a powerslide... looks like yours is a hydromatic? __________________ 60 build: http://67-72chevytrucks.com/vboard/s...d.php?t=280904 61 crew build: http://67-72chevytrucks.com/vboard/s...d.php?t=646830 63 build: http://67-72chevytrucks.com/vboard/s...d.php?t=336537 64 'burb build: http://67-72chevytrucks.com/vboard/s...d.php?t=448681 65 'burb build: http://67-72chevytrucks.com/vboard/s...d.php?t=590715 65 build: http://67-72chevytrucks.com/vboard/s...d.php?t=281955

01-22-2016, 10:29 PM	#425
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: '62 GMC BurbMaster "Rust"oration, Patina Build..... A few more updates .... - - - - Test fitting the China Crap ... - - - - - - __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

Register or Log In To remove these advertisements.