|
11-15-2015, 03:08 PM
|
#1 |
|
Registered User
Join Date: Feb 2012
Location: pleasant valley--placerville ca
Posts: 3,039
|
spring experts
leaf spring front bushings for my 62k10. bought them from LMC and they are about 3/8" shorter than the org. ones. if pressed to the middle of the spring eye there is a gap on each side. Will this be ok?
also the springs leafs have worn spots in the adjoining leafs. can i dress these spots with a grinder? (I know i need new springs) not now. just spent to much on this tk already.
__________________
1961 chevy K10 my build is------------61K10 build |
|
|
|
11-16-2015, 03:26 PM
|
#2 |
|
Registered User
Join Date: Apr 2000
Location: Chester County PA, USA
Posts: 1,228
|
Re: spring experts
Put spacer (washers) evenly on the sides and tighten up.
Grind a radius on the offending spring so it dosent wear into the spring above it.
__________________
72 k/10 short wideside 72 k/5 Blazer 72 K/5 Blazer - obstacle course racer 72 custom/10 8' bed 70 K/5 Blazer 67 C-30 GMC Flat bed 86 GMC K2500 Plow Truck 85 GMC K3500 84 M1008 85 M1008 77 G30 Motor Home 72 Sears 12hp Tractor Glenmoore, Pennsylvania |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
