The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board > The 1973 - 1991 Blazers, Jimmys, and Suburbans Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 06-30-2016, 07:25 PM   #76
buffydores
Senior Member
 
buffydores's Avatar
 
Join Date: Mar 2016
Location: Longview, TX
Posts: 758
Re: 1978 Russet Metallic 4x4

Quote:
Originally Posted by 1978 Cheyenne Big 10 View Post
Hello!

Where were you able to locate the dark saddle color for the door panels to match the other door components and the dash too!?

You have an awesome truck!!
Thanks. I gave the truck back to my Dad today. He was really excited. The door panels are not saddle color. It's GM's mandarin orange. It's kinda a orange saddle. The matching vinyls are more orange, but the panel is definitely not saddle. There's a company in California called Just Dashes that will take the door panels and dash , sand the oxidized plastic out and then rewrap in color matched hard vinyl. It's really nice stuff, but super expensive.

Last edited by buffydores; 06-30-2016 at 07:31 PM.
buffydores is offline   Reply With Quote
Old 06-30-2016, 07:28 PM   #77
buffydores
Senior Member
 
buffydores's Avatar
 
Join Date: Mar 2016
Location: Longview, TX
Posts: 758
Re: 1978 Russet Metallic 4x4

Here's the finished wheels with the chrome trim ring:



The new stickers on the winch:



Trim rings are awesome:


Last edited by buffydores; 07-19-2017 at 03:23 PM.
buffydores is offline   Reply With Quote
Old 06-30-2016, 07:33 PM   #78
buffydores
Senior Member
 
buffydores's Avatar
 
Join Date: Mar 2016
Location: Longview, TX
Posts: 758
Re: 1978 Russet Metallic 4x4

I just received the 4X4 center caps for the rear. We're installing the rear spacers tomorrow. We're replacing the defective clock and the bad gas gauge sending unit next week when parts arrive.
buffydores is offline   Reply With Quote
Old 06-30-2016, 09:23 PM   #79
RANDY COX
Registered User
 
RANDY COX's Avatar
 
Join Date: Mar 2001
Location: RADFORD, VA
Posts: 2,651
Re: 1978 Russet Metallic 4x4

Looking good I bet your Dad was excited with Joy...
__________________
1964 BBC 402 4x4
RANDY COX is offline   Reply With Quote
Old 06-30-2016, 11:57 PM   #80
Dc42d76
Registered User
 
Join Date: Nov 2013
Location: Gallup, New Mexico
Posts: 188
Re: 1978 Russet Metallic 4x4

Those wheels really tied everything together! They look great !Great job Cameron !
Dc42d76 is offline   Reply With Quote
Old 07-01-2016, 09:20 AM   #81
68Timber
I know the pieces fit
 
68Timber's Avatar
 
Join Date: Nov 2007
Location: MONTGOMERY, AL
Posts: 5,523
Re: 1978 Russet Metallic 4x4

Quote:
Originally Posted by Dc42d76 View Post
Those wheels really tied everything together! They look great !Great job Cameron !
They look better as 16's, I'd be tempted to run them without trim rings. Great choice.
__________________
John

79 2wd Blazer (Bruiser)
85 M1009 Blazer (Sarge) build
74 Honda Z50 build
68Timber is offline   Reply With Quote
Old 07-01-2016, 10:16 AM   #82
buffydores
Senior Member
 
buffydores's Avatar
 
Join Date: Mar 2016
Location: Longview, TX
Posts: 758
Re: 1978 Russet Metallic 4x4

Quote:
Originally Posted by 68Timber View Post
They look better as 16's, I'd be tempted to run them without trim rings. Great choice.
The trim rings make them pop. I drove a few days without them. Trim rings are definitely better.
buffydores is offline   Reply With Quote
Old 07-01-2016, 11:41 AM   #83
buffydores
Senior Member
 
buffydores's Avatar
 
Join Date: Mar 2016
Location: Longview, TX
Posts: 758
Re: 1978 Russet Metallic 4x4

Quote:
Originally Posted by Dc42d76 View Post
Those wheels really tied everything together! They look great !Great job Cameron !
Thanks Donny
buffydores is offline   Reply With Quote
Old 07-01-2016, 03:38 PM   #84
buffydores
Senior Member
 
buffydores's Avatar
 
Join Date: Mar 2016
Location: Longview, TX
Posts: 758
Re: 1978 Russet Metallic 4x4

Here we go. New spare tire on custom 16" spare. I went 245/75R16 to give it a good clean fit:


All the wheel stuff lined out perfectly:

Last edited by buffydores; 07-19-2017 at 03:22 PM.
buffydores is offline   Reply With Quote
Old 07-01-2016, 07:07 PM   #85
phillipm
Registered User
 
Join Date: Oct 2014
Location: Scottsdale, AZ
Posts: 465
Re: 1978 Russet Metallic 4x4

That looks killer. nice job!
phillipm is offline   Reply With Quote
Old 07-03-2016, 10:19 PM   #86
buffydores
Senior Member
 
buffydores's Avatar
 
Join Date: Mar 2016
Location: Longview, TX
Posts: 758
Re: 1978 Russet Metallic 4x4

Last couple of items. The steering pump whines when it gets warm. Waiting on the new NOS quartz clock.

Any suggestions on the steering pump?
buffydores is offline   Reply With Quote
Old 07-08-2016, 12:16 AM   #87
Fishermen0105
Registered User
 
Join Date: Jul 2016
Location: Central Texas
Posts: 40
Re: 1978 Russet Metallic 4x4

Love the seats, where did you come up with the material? I'm restoring a '79 and would like to come up with a way to do the blue plaid. Great restoration, hope mine looks half as good when I'm done.
Fishermen0105 is offline   Reply With Quote
Old 07-08-2016, 06:16 AM   #88
buffydores
Senior Member
 
buffydores's Avatar
 
Join Date: Mar 2016
Location: Longview, TX
Posts: 758
Re: 1978 Russet Metallic 4x4

SMS out of Oregon has the materials stock piled.
buffydores is offline   Reply With Quote
Old 07-08-2016, 09:03 AM   #89
68Timber
I know the pieces fit
 
68Timber's Avatar
 
Join Date: Nov 2007
Location: MONTGOMERY, AL
Posts: 5,523
Re: 1978 Russet Metallic 4x4

Is the PS pump new?
__________________
John

79 2wd Blazer (Bruiser)
85 M1009 Blazer (Sarge) build
74 Honda Z50 build
68Timber is offline   Reply With Quote
Old 07-08-2016, 09:19 PM   #90
buffydores
Senior Member
 
buffydores's Avatar
 
Join Date: Mar 2016
Location: Longview, TX
Posts: 758
Re: 1978 Russet Metallic 4x4

Quote:
Originally Posted by 68Timber View Post
Is the PS pump new?
Newish.

These trucks make everything else look blah. Here it is today at a charity skeet shoot. There's something so right about driving around with a couple of shotguns and boxes of shells in this thing. 'Murica!!!



I've spent the past two days replacing the clock, instrument backing plate, speedometer, circuit board, clear plastic bezel, dash bulbs, speedometer cable and speedo gears to get the speedo running true. I had my little GPS app measuring the difference between actual speed and speedo speed. It was fun.

Last edited by buffydores; 07-19-2017 at 03:25 PM.
buffydores is offline   Reply With Quote
Old 07-08-2016, 10:35 PM   #91
tommys72
Registered User
 
tommys72's Avatar
 
Join Date: Jun 2012
Location: springfield mo
Posts: 3,075
Re: 1978 Russet Metallic 4x4

Beautiful! Very nice work
__________________
United States Marine Corps 2000-2011
Iraq and Afghanistan veteran
Just living life now and enjoying it and my wife, daughter and son


tommys72 is offline   Reply With Quote
Old 07-09-2016, 06:03 PM   #92
buffydores
Senior Member
 
buffydores's Avatar
 
Join Date: Mar 2016
Location: Longview, TX
Posts: 758
Re: 1978 Russet Metallic 4x4

Both blinkers stopped working. Any ideas?
buffydores is offline   Reply With Quote
Old 07-09-2016, 06:39 PM   #93
bhc41051
Senior Member
 
bhc41051's Avatar
 
Join Date: Apr 2012
Location: Otway OH
Posts: 788
Re: 1978 Russet Metallic 4x4

could be your flasher.
Attached Images
 
bhc41051 is offline   Reply With Quote
Old 07-09-2016, 08:01 PM   #94
buffydores
Senior Member
 
buffydores's Avatar
 
Join Date: Mar 2016
Location: Longview, TX
Posts: 758
Re: 1978 Russet Metallic 4x4

Left one is fine. Right one is not. The actual blinkers with fine. It's just the dash bulb that's not blinking. I just replaced the bulb, so that wouldn't be the first guess.
buffydores is offline   Reply With Quote
Old 07-09-2016, 08:12 PM   #95
buffydores
Senior Member
 
buffydores's Avatar
 
Join Date: Mar 2016
Location: Longview, TX
Posts: 758
Re: 1978 Russet Metallic 4x4

I think it's a ground. It was dimmer than the right one before and after I replaced the bulb. Where did this thing ground out. I just replaced the circuit board, so the problem isn't there. Where did it ground?
buffydores is offline   Reply With Quote
Old 07-10-2016, 08:25 AM   #96
buffydores
Senior Member
 
buffydores's Avatar
 
Join Date: Mar 2016
Location: Longview, TX
Posts: 758
Re: 1978 Russet Metallic 4x4

I'm thinking it's the bulb holder. Everything else grounds to the same place, so it's either the bulb or holder. I'll look at it in a couple of days.
buffydores is offline   Reply With Quote
Old 07-10-2016, 03:43 PM   #97
Willowrun
Senior Member
 
Willowrun's Avatar
 
Join Date: Mar 2013
Location: Ann Arbor, MI
Posts: 1,029
Re: 1978 Russet Metallic 4x4

Do you mind sharing part number(s) for the replacement speedo cable you used?
Willowrun is offline   Reply With Quote
Old 07-10-2016, 11:45 PM   #98
buffydores
Senior Member
 
buffydores's Avatar
 
Join Date: Mar 2016
Location: Longview, TX
Posts: 758
Re: 1978 Russet Metallic 4x4

Quote:
Originally Posted by Willowrun View Post
Do you mind sharing part number(s) for the replacement speedo cable you used?
Just hollered down to O'Reillys for a delivery to our shop. We buy a lot from them.

Figured out the light. The bulb was a dud and the bulb plug had some corrosion or something that was dimming the bulb. I cleaned the bulb plug with soap and water, then vinegar, then soap and water, then water, then dry. Then I replaced the bulb. Now the light is just as bright as the left one.

The driver side mirror won't stay put at highway speeds. Gonna fix that next. I think the rubber grommet does more holding than it first appears.

Adding dielectric grease to the serpentine belt has addressed most of the whining sounds up front. Needed new header bolts and nuts. Got those on. Pretty much there.

I like driving things for awhile to work out the bugs. I took my two boys to a local car show yesterday and showed the Blazer. That was super cool.

Last edited by buffydores; 07-10-2016 at 11:53 PM.
buffydores is offline   Reply With Quote
Old 07-12-2016, 08:38 AM   #99
buffydores
Senior Member
 
buffydores's Avatar
 
Join Date: Mar 2016
Location: Longview, TX
Posts: 758
Re: 1978 Russet Metallic 4x4

Dad commented on the slop in the steering column, so I ordered the Borgeson steering shaft with u-joints on each end.

http://www.borgeson.com/xcart/produc...&cat=34&page=1

The steering box is new, the ball joints are new and I have a frame brace installed, so there's no reason I shouldn't upgrade the shaft to something new.

It will probably be the first part of next week when I get a chance to install it.
buffydores is offline   Reply With Quote
Old 07-15-2016, 03:26 PM   #100
aggie91
I'm just glad to be here!
 
aggie91's Avatar
 
Join Date: Jan 2008
Location: Longview, TX
Posts: 4,788
Re: 1978 Russet Metallic 4x4

Outstanding work on the Blazer! Hopefully since I'm in the same part of Texas, I can see it some day in the future.

Where did you get the rubber you cut for the floor mats?
__________________
Karl



1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues)
http://67-72chevytrucks.com/vboard/s...d.php?t=372424

The LST Challenge:
http://67-72chevytrucks.com/vboard/s...=1#post7812257

Korbin's 1st Square: "Sunburn"
http://67-72chevytrucks.com/vboard/s...d.php?t=418618

1985 GMC Sierra: "White Trash", Korbin's 2nd now...
http://67-72chevytrucks.com/vboard/s...d.php?t=632305

Henry - 1984 Chevrolet, Owen's 1st Square
aggie91 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:55 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com