NY WTB clutch linkage.

[Toms67]

I have the clutch pedal. I need everything else. I have the fork. But I need everything in between. For a Chevy 350. Thanks.

[Jeff's bowtie's]

I should have this off a 72 C/30 with a 350 I'll get pics tomorrow morning if interested thanks Jeff

[michael bustamante]

i hasve the z bar. the ball that screws into the block and the rod that goes thru the firewall to the z bar for the v8
50.00 plus ship

[Toms67]

Yeah let me know Jeff. I'm interested in getting the whole thing if I can.

[Jeff's bowtie's]

Originally Posted by Toms67

Yeah let me know Jeff. I'm interested in getting the whole thing if I can.

Ok will do tomorrow

[Toms67]

I should've mentioned it's 2 Wheel Dr. I don't know if it makes a difference.

[Toms67]

You mentioned the parts are off a C 30 I have a C 10 are the clutch linkage set up the same?

[michael bustamante]

In case ypu were interested..

[Jeff's bowtie's]

Here is a pic of the parts not sure if there's a difference in a C/30 & C/10 but it was a 350 truck $50.00 shipped let me know thanks Jeff ps the grease is free lol

[Toms67]

I will take it. Hopefully it fits. Please P.m. me. PayPal information. And I will send payment. And shipping address. Thank you.

[Jeff's bowtie's]

Pm sent

[Toms67]

Payment will be sent out first thing Monday morning. Thank you.

[gmc 2500 4x4]

thats a 4wd setup, 2wd has a straight rod

[Toms67]

Will it still work? Or will I have to get a different rod?

[gmc 2500 4x4]

not sure, theres alot of questions on this, i thought 2wd had the straight rod. frames are different i know, z-bar might be longer or shorter?

[Toms67]

I guess I better get into this more. I would like to get the parts that are meant to fit.

[gmc 2500 4x4]

do a search on here, you'll get answers, good luck

[gmc 2500 4x4]

http://67-72chevytrucks.com/vboard/s...d.php?t=545110

[Jeff's bowtie's]

Originally Posted by gmc 2500 4x4

thats a 4wd setup, 2wd has a straight rod

If your referring to my set up it came from an original C/30 I'm not sure which which rod your talking about

[gmc 2500 4x4]

upper, maybe different applications but what you have is what i have on my 69 4x4

[Toms67]

Thank you for the links. Very helpful. I think it will work. The 30 series cab and frame seem to be the same. As far as the cab to the front of the frame. And it was out of the 350. So I think I will still go ahead and get it. Thank you for all the help.

[johnscab]

Originally Posted by Jeff's bowtie's

Here is a pic of the parts not sure if there's a difference in a C/30 & C/10 but it was a 350 truck $50.00 shipped let me know thanks Jeff ps the grease is free lol

I have a 72 c20 250/sm465/4x2. This is exactly the setup I have. If you install the whole setup and the lower rod seems to short, hit me up. for some reason that happened on my setup... i had to lengthen the lower rod by an inch. All parts were original to the truck. the only thing I changed was the clutch, pressure plate and throwout bearing. the geometry and measurements of the new pressureplate and short (correct) throwout were the same as the original flat finger pressureplate and long throwout bearing... never got to the bottom of it, so i just lengthened the rod...

Also, from what I have seen in my research is that there are variations in the Zbar and mount points based on engine and frame. It looks like the upper and lower rods were always the same. again, based on what I have seen. good luck

[Toms67]

I got the clutch linkage from Jeff's bowties. It will work just fine. Thank you for your information.