WA Parting '72 1/2ton 2wd Suburban

[randy500]

Originally Posted by DeadheadNM

Interested in the radiator too. Usable? OEM? Thanks.

I will take a look at my radiator situation this week, I have an OEM 4 core Harrison that still even has the curved overflow nipple...that is leaking since my son decided to beat on some parts which he rested on top of the radiator prior to getting the hammer out...

can you tell I am irritated about this????

[too much stuff]

The pass side trim looks better than what I have now. How about the drivers side? Interested in the 5 pieces from the front doors back.
Thanks.

[randy500]

Originally Posted by too much stuff

The pass side trim looks better than what I have now. How about the drivers side? Interested in the 5 pieces from the front doors back.
Thanks.

Trim on driver side is missing. I need the door piece on the 3rd door. How about $10ea plus shipping on the 2 passenger side lower pieces on either side of the rear wheel.

[too much stuff]

Originally Posted by randy500

Trim on driver side is missing. I need the door piece on the 3rd door. How about $10ea plus shipping on the 2 passenger side lower pieces on either side of the rear wheel.

Good price but will pass. Was hoping the drivers side was on there.

[WannaBe68]

Originally Posted by WannaBe68

If it's worth your time...I'd be interested in one of the headliner bows. One that has the chrome plastic piece still in good condition.
If you're interested, post some pics, let me know how much and I'll PM you my info for shipping.
Thanks

Any luck on having a nice headliner bow?
Thanks again

[Rust hole]

def want the tail gate and poss roof rack. shipping to 32092?

[Hart_Rod]

Interested in the roof rack and the left and right rear window crank mechanisms.

[randy500]

Originally Posted by 6772king

I'd like the rear wheel tubs if they are any good ...Also a patch for around the gas neck

The wheeltubs look nice, no real dents noted and not rusty. I guess these are welded in? Can you confirm? If you can post a picture of how you need the tubs and gas filler cut out.

[randy500]

Originally Posted by WannaBe68

Any luck on having a nice headliner bow?
Thanks again

The bows seem to be fine. I posted a picture of one. Will get a bettter pic posted. How about$20 for the part plus shipping which I guess will be in a triangle formed piece of cardboard? How do you remove them, just in case there is some trick to it

[randy500]

Originally Posted by Rust hole

def want the tail gate and poss roof rack. shipping to 32092?

I will remove that gate and weigh it tonight, shipping will not be cheap since its large and heavy, is bubble wrapped in a Styrofoam box and shipped via UPS ok for you? I am sure it will get there but unsure if that is enough to protect it to meet your needs.

[randy500]

Roof rack pictures...first up is Wannabe68 then Hart Rod...

I have no Idea on what this is worth...lets say $50 plus shipping, where you gonna find one if you want one???

Chrome is checked and pot metal pitted, not terribly bad and I think is shown in the pictures. I think the roof protector strips are stainless.

[frankinstein]

I will take one or two if they are available after Wannabe68. but I am not sure how to take them off yet. Let me know the total and your pay pal info. Thanks.

[randy500]

Originally Posted by too much stuff

Good price but will pass. Was hoping the drivers side was on there.

Found the driver side behind the wheel well in the back of the burb...same price on this one...has some corrosion so you would have to strip the anodizing and buff it out. There is a thread here on the forum on the process.

[randy500]

Originally Posted by Hart_Rod

Interested in the roof rack and the left and right rear window crank mechanisms.

Just noted you need the window regulator...I am using the doors complete for my crew cab build. Let me know on the roof rack.

[randy500]

Originally Posted by BaggedBurban

If it has any of the circular plastic interior plugs that cover bolt/screw heads I will take them. Found on the upper inside of body near the windows and rear of body where the upper hatch mounts etc. Thanks!!!

It does have the very rear shoulder belt plugs and the plugs for the rear door hinge holes. Dollar a plug plus small flat rate box?

[randy500]

Originally Posted by frankinstein

I will take one or two if they are available after Wannabe68. but I am not sure how to take them off yet. Let me know the total and your pay pal info. Thanks.

I will try taking one out tonight and figure a price for shipping, your zip code please?

[Hart_Rod]

Originally Posted by randy500

Just noted you need the window regulator...I am using the doors complete for my crew cab build. Let me know on the roof rack.

No worries. Thought it was a factory roof rack, I'll pass. Take care,

Rob

[randy500]

Originally Posted by Rust hole

def want the tail gate and poss roof rack. shipping to 32092?

Shipping on the tailgate alone is $144 with insurance. The tailgate is much nicer than I expected. Since you are the only one that has expressed interest it is yours at that price for a day or so and then I will keep it and relist it at a higher price. I think the roof rack should fit in the box for very little extra shipping. Shipping will be at actual cost on this since it seems everytime I get a time and cost quote when I ship it it is a few bucks extra...

[frankinstein]

My zip is 85086

[Cash3481]

Price on the heat stove and pipe shipped to 67110 please?

[WannaBe68]

Originally Posted by randy500

The bows seem to be fine. I posted a picture of one. Will get a bettter pic posted. How about$20 for the part plus shipping which I guess will be in a triangle formed piece of cardboard? How do you remove them, just in case there is some trick to it

If the chrome cap piece is good to go, I'll take one.
I'll PM you my address for a shipping quote.
Thanks!

[WannaBe68]

Off the top of my head, I believe there are a couple of screws on the end of each bow that holds them in place.

[Rust hole]

Originally Posted by randy500

Shipping on the tailgate alone is $144 with insurance. The tailgate is much nicer than I expected. Since you are the only one that has expressed interest it is yours at that price for a day or so and then I will keep it and relist it at a higher price. I think the roof rack should fit in the box for very little extra shipping. Shipping will be at actual cost on this since it seems everytime I get a time and cost quote when I ship it it is a few bucks extra...

sounds good Ill take the tailgate and roof rack. How would you like to be paid?

[randy500]

Originally Posted by Rust hole

sounds good Ill take the tailgate and roof rack. How would you like to be paid?

Paypal is best for payment, the tailgate is yours and I will take the roof rack off and see if it will fit in the box with the tailgate, I hope the length of it works into the same width of the tailgate. I will PM you with a total.

[randy500]

Originally Posted by Rust hole

sounds good Ill take the tailgate and roof rack. How would you like to be paid?

Sending PM now

Tailgate and roof rack sold to Rust hole....